Z Control Board Parts

The control went thru a month or so of erratic behavior; the display would come on and flash and beep without any input on my part. Then it died completely. I did a little research on the GE website and determined likely cause waa a defective user interface board. I found AppliancePartsPros.com and contacted their tech support, who directed me to check the output of the control board across 2 pins for 13.5v DC. I did this, and measured 13.8v, so control board was good. When I reconnected the... Read more

• Shuts off too soon

After taking the timer apart to see why it would not turn I found the timer motor was jammed. Taking the motor apart I found a broken gear. Looked up the model number of the dryer and found a new timer assembly thru appliancepartspros.com I ordered, a very easy process, received the part 2 days later. Installed the assembly in about 5minutes and had the dryer back up and running Read more

Suspected it was the thermostat, since temperature stayed the same at multiple settings over a 24 hr period. There was only three components inside the freezer besides the evaporator, the fan was working, so I decided to just go ahead and replace the thermostat and defrost thermostat. Also replaced the defrost timer by the compressor, just to get all the old parts replaced with new. I had already replaced the compressor, so now I've pretty much have a new freezer. The new parts works great and... Read more

Replaced the control board on bottom of machine Read more

I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more

First I watched Youtubes and decided it was the lower control board, ordered it from Appliance Parts Pros, and got it within 2 days. Installed it and no change. Called Appliance Parts Pros to repair the help line and they were very helpful told me I needed the upper board (UI) so I ordered it got it also in 2 days installed it and everything works perfectly. Appliance Parts Pros is very helpful and prompt in shipping. Highly recommend. Read more

I researched online and found that it was probably one of two things wrong: the heat probe or the control board (clock). Since the probe was less expensive, I ordered that on Appliance PartsPros. It arrived SO quickly, and with the repair video I easily replaced it. BUT... it still got the F10 reading. Sigh. So I found a local appliance repairman (I didn't want to replace a more expensive item if it turned out I was wrong). He was a good one: he listened to my story, said he was sure it was the... Read more

The indication was that when I tried to use the icemaker or water dispenser, the green LED on the front would dim and the ice maker dispenser wouldn't work. It was intermittent at first, but this indicated it may be a power management issue, in that insufficient voltage was getting to the ice dispenser motor. I unplugged the unit to reset the electronics for about a minute, and when I plugged it back it the compressor would try to turn on (solenoid or relay would click about every two... Read more

Looked up the model number on the internet, found a diagram on AppliancePartsPros.com which led to part number for the user interface, also found "how-to video" on-site that included how to remove user interface panel. When the part came it was an easy fix, remove defective user interface panel - remove 2 screws mounting lip, then remove 2 screws mounting panel, unplug 4 connectors in back, plug connectors into the new panel, mount new panel, and re-mount lip. Less than 10 minutes, the panel... Read more

This was a 2000 model so rather than just replace the defrost timer which was visibly burnt on the terminals, we just did everything. The cold control, defrost timer, thermostat, defrost heater and the compressor capacitor were all replaced. I had the same issue on my older unit and tore it apart replacing one item at a time over a three month period so on an older one i suggest do it all while it is apart. Read more

First I thought it was the defrost timer (talking to a friend). Replaced as $30+ dollar part and cheaper than a service call. Unfortunately, that did not help. Did some google searches and came across ApplicancePartsPros.com. They had a ton of useful information from chat availability to videos. Through the chat, we determined most likely it was the thermostat. I ordered it with expedited shipping and it shipped the same day and arrived earlier than expected. However, the part looked... Read more

• Timer will not advance

Replaced the timer unit and knob. Read more

Replaced the knob and timer. We didn't need the knob insert, because it was included with the knob which we didn't know this. Read more

I have an 11 year old GE Monogram side by side built-in fridge that had been having cooling problems intermittently. The fridge would work for a day and then the compressor would not come on for 8 hours and temps would rise to the upper 20s in the freezer. Fans, lights, and everything else appeared to be functioning properly. It went like this for a few weeks and we put it off until the compressor decided not to come on at all for a full day. Being barely able to use a multi-meter, I watched a... Read more

Replaced the Timer and Solenoid in 30mins very easy. APPros, fast shipping is amazing! Read more

Replaced the timer and drain solenoid (timer had stuck in "solinoid active" position long enough to burn up the solenoid). Complete the project in two stages on two separate days: 1) replaced solenoid, which took about 30 minutes, 2) replaced timer. Accessing both was straight forward on this simple design dishwasher. Removed the kick panel to access the solenoid. Removed 3 screws and a circlip to remove the old solenoid. Reversed the process to complete this part of the repair. The... Read more