Push Button Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10441696
Burner won't regulate heat or stays on constantly? The infinite switch controls burner temperature settings. Most DIYers replace it in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Bad burner control Larry T. • Rose Hill , KS • May 14, 2018
Replaced the control that I think was bad from the purchase of the stove new as the burner didn’t throttle as is does now.
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600
This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:
- Detects door position and allows operation only when the door is fully closed
- Interrupts operation when the door opens for safety
- Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
- Intermittent starts due to worn actuator or internal switch contacts
What's included:
Install notes:
- Disconnect power before servicing
- Access the switch from the front or top panel; release mounting screws or tabs
- Move wires to the new switch one at a time to maintain correct positions, then secure the switch
- Test operation before reassembly
More
$49.95
- Compare At:
-
$58.94
- You Save:
-
$8.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003804
Washer won't spin or stops mid-cycle? A faulty lid switch prevents operation when the lid is bumped or opened. Simple snap-in replacement restores cycles.
Do-It-Yourself Stories from Customers like You
Washer didn't spin during spin cycle Ronney S. • Miami , FL • February 09, 2017
I had removed three screws behind the control board cover of the washer, to access the old lid switch. I checked the continuety of the of the switch with a multimeter and it obviously failed the the test by displaying infinity of <1, rather than being 0. I removed the old switch with a flathead screw driver, I tested the new one and installed it in no time. Problem solved!!!
Read more
More
$57.72
- Compare At:
-
$68.69
- You Save:
-
$10.97
Genuine Frigidaire part
By: Frigidaire
Part Number: 134042800
Color: white. This knob measures about 1-1/2 inches in diameter.
Do-It-Yourself Stories from Customers like You
Rotary knob cracked at base Mark W. • Delray Beach , FL • July 28, 2015
Ordered new one from Appliance Parts Pros. Installed new one.
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Speed Queen part
By: Speed Queen
Part Number: 202133
Restore cycle selection control on your top-load washer. This timer knob assembly replaces a cracked, stripped, or broken knob for smooth operation.
Do-It-Yourself Stories from Customers like You
Just a broken knob Ray L. • Claremore , OK • July 28, 2018
Took off the old an put on the new
Read more
More
$16.18
- Compare At:
-
$19.44
- You Save:
-
$3.26
Genuine Samsung part
By: Samsung
Part Number: DA34-10003S
Compressor won't start or cycles on and off every few minutes? This overload relay protects against overheating. DIY repair in about 10 minutes.
Do-It-Yourself Stories from Customers like You
Samsung dual cooling neither frig or freezer was cold Philip H. • Hazleton , PA • October 12, 2014
The compressor was very hot and did not appear to be running. You could here a relay click on and off 15sec cycle. repeating every 2 minutes!
Bought a new overload relay too repair, plus a new thermal protection switch because it was cheap.
Both parts are actually located on the compressor behind a plastic cover. Found part numbers for parts by searching the compressor number on google! $25 Repair............
Read more
More
$34.02
- Compare At:
-
$37.42
- You Save:
-
$3.40
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316246
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10303835
Replace your cooktop's cracked, broken, or missing control knob. Controls burner heat levels or downdraft fan. Restores full function and appearance.
Do-It-Yourself Stories from Customers like You
Broken Kitchenaid cook top vent know Kristy C. • Haymarket , VA • July 22, 2018
Ordered replacement
Read more
More
$25.76
- Compare At:
-
$30.65
- You Save:
-
$4.89
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339334
Fix a washer that won't fill properly or overfills with this pressure switch. Controls water level sensing. DIY-friendly repair, about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Switch control water volume from small medium high was not function get stuck and not able to turn Ty L. • Gaithersburg , MD • August 10, 2014
After the part arrives, I was double check to make sure I got the right part. Importantly, unplug the electrical power first before do anything, also turn off the water hose for safety.
Then removed 4 screw out side panel and 2 screw in side to get lose.
After all, replaced a new part and put all panel and screw back together.
Finally, plug in electrical power then a water hose and test a new part just installed.
So far so good, seem like everything was function OK.
Again, thanks for your web...
Read more
More
$130.45
- Compare At:
-
$155.24
- You Save:
-
$24.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820051
Fix washer overfilling or won't fill issues with a new water level pressure switch. Prevents flooding and restores proper fill cycles. 10-minute DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed and flooded the basement Tyler H. • Gardner , KS • February 27, 2016
Replaced the water-level switch and hose. Washer works again, no overflowing since!
Read more
More
$110.42
- Compare At:
-
$130.30
- You Save:
-
$19.88
Genuine Ge part
By: Ge
Part Number: WB03X10208
Control knob for range hood fan speed and light settings. Replaces broken, cracked, or missing knobs. Installs on control panel with half-circle mount.
Do-It-Yourself Stories from Customers like You
Failed light knob. Magdi B. • Springfield , VA • March 12, 2022
Replaced it with the ordered part.
Read more
More
$9.69
- Compare At:
-
$11.63
- You Save:
-
$1.94
Genuine Ge part
By: Ge
Part Number: WB03X21352
This replacement control knob fits the surface burner valve on many ranges and cooktops. It restores smooth on/off operation and flame adjustment when the original knob is cracked, stripped, wobbly, or missing.
- Press-fits onto the valve stem to turn the surface burner on/off and set flame level
- Replaces knobs that are cracked, stripped (spins or slips), loose, melted, or missing
- Helps restore accurate feel and alignment so settings match the dial
- Common signs: knob rotates without engaging the valve or does not stay seated
What's included: One surface burner control knob Install notes:
- Ensure all burners are off and the appliance is cool before servicing
- Pull the old knob straight off the valve stem; do not pry against the control panel
- Align the new knob with the stem flats/notch and press firmly until fully seated
- If the knob won't seat, inspect the stem for debris or damage before reattempting
Do-It-Yourself Stories from Customers like You
Surface element only worked on high Martin F. • Homedale , ID • July 16, 2019
I replaced the switch. I ordered the switch on Friday afternoon and received it Tuesday. And that was standard shipping.
Read more
More
$9.67
- Compare At:
-
$11.41
- You Save:
-
$1.74
Genuine Ge part
By: Ge
Part Number: WB24T10165
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
- The heating element not turning on or off
- Difficulty in adjusting the heat levels
- The switch feeling loose or unresponsive
- Flickering or intermittent operation of the heating element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner size switch was bad Charles P. • Okeechobee , FL • October 16, 2015
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself
Read more
More
$49.62
- Compare At:
-
$58.55
- You Save:
-
$8.93
Genuine Ge part
By: Ge
Part Number: WH01X24376
Replacement button tree assembly for washer control panels. Restores reliable button function when selector buttons are missing, cracked, or unresponsive.
Do-It-Yourself Stories from Customers like You
Washer would not run or would not complete cycle Gary B. • Fenton , MO • December 09, 2025
Replaced button tree.
Read more
More
$10.53
- Compare At:
-
$12.64
- You Save:
-
$2.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251394
The Knob is an OEM part for Whirlpool washers and dryers. This control knob allows users to select various settings and cycles for the appliance, providing precise control over washing and drying operations.
Causes of a bad knob can include regular wear and tear, accidental impacts, or exposure to moisture and heat.
Symptoms of a bad knob include:
- Knob not turning smoothly or becoming stuck
- Cracks or breaks in the knob
- The knob slipping or not staying securely on the control shaft
- Difficulty selecting or changing cycles
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Selected knob broke. Gerald K. • Excelsior , MN • April 07, 2017
Ordered new knob. When it arrived I installed it in a few seconds.
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 134043000
Replace your washer dryer combo's cracked, broken, or missing timer knob. This control knob installs on the timer stem to set and adjust cycle timing.
Do-It-Yourself Stories from Customers like You
Broken timer knob Bart H. • Gulf Shores , AL • November 16, 2014
Pushed new one on.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01