Bath Fan Light Switch Parts
Genuine Ge part
By: Ge
Part Number: WH16X34317
The Blower Wheel is an OEM component specifically designed for GE dryers. It is responsible for circulating air during the drying cycle, directing airflow through lint and clothes to remove moisture. The plastic blades of the blower wheel push air through the dryer and out the vent when the motor is running.
Symptoms of a bad blower wheel include:
- Slow or inefficient drying times even on low moisture loads
- Strange noises from inside the dryer cabinet
- Excessive vibrations felt through the dryer door or cabinet
- Bent or cracked blower wheel blades
Causes can include normal wear and tear over time, accidents that damage the blades, or failures in the secure mounting of the blower wheel.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Blower wheel was not working.. Bobby C. • Sevierville , TN • November 23, 2020
I purchased a new blower wheel and replaced it. It saved me about a $200 repair bill.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9762215
If your range burner won't respond to settings or produces erratic heat, this surface element infinite switch restores precise temperature control.
Do-It-Yourself Stories from Customers like You
Blew the oven switch! i hate it when that happens! Daniel F. • Miami , FL • July 18, 2015
First and foremost I UNPLUGGED THE OVEN!. I'll pass on the early morning SHOCK THERAPY! Second, I unscrewed aluminum protection plate from back of oven. Next, I unplugged the two connections behind the oven switch. Then I removed the plastic switch from the front and unscrewed the two screws that secured the oven switch to the oven. Once you've completed all these steps you take your new oven switch and do everything again but in reverse order. Hope this was informative, direct, and that your...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB36X10328
Replace your microwave's light bulb to restore interior visibility and monitor cooking without opening the door. Fits specific GE models—verify compatibility.
Do-It-Yourself Stories from Customers like You
Under microwave lamp sockets were fried from using higher wattage bulbs David B. • Winchester , TN • October 22, 2014
Your website didn't show the sockets for my model,but I ordered some for a different model and they worked perfectly.I also ordered the correct 30watt bulbs.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761048
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Do-It-Yourself Stories from Customers like You
Burner was stuck on high William M. • Mountaintop , PA • June 23, 2014
Replaced dual element switch.
Fixed the problem.
All is good
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9763762
If your cooktop burner won't heat or won't adjust temperature, the infinite switch likely failed. This part regulates burner power. DIY repair in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Broken cook top switch Joseph M. • Scottsdale , AZ • January 27, 2015
Removed control panel and replaced broken switch. Much easier then expected.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10350906
Dryer won't start or stops mid-cycle? A faulty door switch prevents operation when the door position isn't detected. Moderate DIY repair, 30-45 minutes.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936800
If your washer won't start or the lid won't unlock, the lid lock switch may have failed. This DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The locking mechanism would not release the lid had to break it to open Dennis H. • Bridgeton , NC • January 10, 2015
1) Ordered part.
2) Removed front panel by loosening the two screws at the bottom front.
3) Removed old Safety Switch/Lid Lock by disconnecting wires (plug and 2 female disconnects)
4) Reconnected all wires and reinstalled switch.
5) Replaced front panel.
6) Tested Unit.
7) FYI - I found that the locking mechanism stays locked until cycle completely finishes on its own. DO NOT force the cycle to end. Lid will NOT unlock.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10167742
If your range burner stays on high and won't adjust temperature, the infinite switch likely failed. This control switch regulates element power levels.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10184148
Washer only fills with hot water or stops mid-cycle? The water temperature switch controls incoming water temps for proper cycle selection. DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would not let cold water into the machine. Jim J. • Prosser , WA • March 12, 2014
I tested the Atc. mid level switch, with my multi tester and found it was not sending enough current to the cold water inlet valve, so it would not open and let cold water in. I replaced the switch, (it was a snap) literally it snapped in place. replace the front face and turned the water back on and plugged in the washer, and turned it on. It worked perfect and has been since. good and easy repair even for a novice like me..
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293831
Burner overheating or stuck on high? This infinite switch regulates temperature by cycling power on and off. Common fix for unresponsive heat control.
Do-It-Yourself Stories from Customers like You
Defective switch elements burned out Leslie G. • Columbia , SC • March 18, 2019
I had one element that would operate wide open when turned on the low setting. It needed the switch replaced. Since I was replacing other elements I went ahead replaced them all, adding new drip pans and wiring kits to each new element. Once I replaced everything I was still having issues with the element that had the switch replaced. After further investigation my AC voltage readings were not correct at this element. I traced the problem back to the Molex connector feeding voltage to the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10012
Burner stuck on high or won't adjust temperature? This range infinite switch controls surface element heat levels. Common DIY fix for uneven heating.
Do-It-Yourself Stories from Customers like You
The control switch for GE range had contact problem Yihua T. • Tucson , AZ • August 19, 2018
Replace the switch (part # WB24T10012).
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10071
The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.
Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.
Symptoms of a bad switch gas valve include:
- Burners not igniting
- Irregular or weak flame
- Gas odor near the stove
- Inconsistent burner performance
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One of my gas range's was not igniting Mark M. • Centennial , CO • June 23, 2014
Bought this switch gas valve for the non-functional burner, and it cleared right up.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61004888
Refrigerator not cooling or freezer making loud noise? A failed evaporator fan motor stops cold air circulation. This DIY repair takes about 30 minutes.
This part fixes the following symptoms
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Evaporator fan motor noisey 15 years old Jack R. • Ithaca , MI • May 19, 2014
Removed back panel in freezer compartment. Held on by four hex head screws. Disconnected wire assembly from panel and then replaced evaporator fan motor on kitchen table. Evaporator fan motor is attached to back side of freezer panel by four hex head screws. Easy repair to do.It took me about 30 minutes to do the repair.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10441696
Burner won't regulate heat or stays on constantly? The infinite switch controls burner temperature settings. Most DIYers replace it in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Bad burner control Larry T. • Rose Hill , KS • May 14, 2018
Replaced the control that I think was bad from the purchase of the stove new as the burner didn’t throttle as is does now.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR02X10591
Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Evaporator fan making noise/changing speed; freezer light socket bad Paul S. • Albany , OH • November 26, 2016
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527842
The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.
You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.
Symptoms of a bad Range Switch Rocker include:
- The switch not responding when pressed
- Inconsistent or flickering performance of the heating elements
- Physical damage or looseness in the switch
- Intermittent operation or complete failure to activate the desired function
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rocker switch for to adjust the size of the heating element for the stove broke as well as the rocker switch to adjust the oven light broke Benjamin G. • West Sacramento , CA • January 07, 2017
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once...
Read more
More