Difficult Screw Tape Start Tool Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 279872
This fixed-value resistor is an electrical component used in select dryers to limit current in a specific control circuit. It helps the timer or electronic control operate correctly by dropping voltage to safe, design-intended levels.
- Provides precise resistance to reduce voltage/current in the designated dryer circuit
- Supports proper operation of the timer, control board, or end-of-cycle signal (varies by model)
- Failure may present as a timer that won't advance, an inoperative signal/buzzer, or irregular cycle behavior
- Replace if visibly burned/damaged or if testing shows an open or shorted condition
What's included: One resistor Install notes:
- Disconnect power to the appliance before servicing
- Access the console/wiring harness and note original wire routing
- Make secure, insulated connections and route the resistor/leads exactly as original to avoid heat or chafing
- After installation, run a test cycle to ensure proper operation of the affected function
Do-It-Yourself Stories from Customers like You
Timer wouldn't advance on my dryer John L. • Oblong , IL • March 22, 2016
I ordered a new timer and installed it with the help of the videos provided and this did not solve my problem so I chated with the pros @ Appliance Parts Pros and told them my problem and they told me the problem and recommended the part I needed and With the incredibly fast shipping I had the part the next day. I installed it and now my dryer timer works great.Thanks to APPs for their help and ease of ordering and fast shipping. I highly recommend AppliancePartPros and will definitely use...
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 316021109
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Do-It-Yourself Stories from Customers like You
Everything went great! Tiffanie H. • Ortonville , MI • January 12, 2016
Husband installed the glass and trim it looks great!
Read more
More
$13.54
- Compare At:
-
$14.89
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 814103
This metal clip secures and stabilizes surface burner components on gas cooktops. It prevents burner parts from shifting during cooking and ensures proper alignment for safe gas flow. Install this clip if burner grates move during cooking, flames appear uneven, or burner parts seem loose or misaligned.
Do-It-Yourself Stories from Customers like You
Oven element Albert M. • Keyport , NJ • April 05, 2016
Two screws old one out new one I in. Took 10 min. Ordered Parton Friday recieved part on Saturday. Great service.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W10817436
This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.
- Fastens brackets, panels, and internal components to their mounting points
- Maintains alignment and reduces vibration during operation
- Replaces missing, worn, rusted, or stripped hardware
- Helpful when you notice rattling, loose panels, gaps, or parts shifting out of position
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Align the part being secured and remove any damaged hardware
- Hand-start threads to avoid cross-threading; tighten with the correct driver
- Do not overtighten; verify the assembly is secure and operates freely
Do-It-Yourself Stories from Customers like You
Wheel tub broken. Paul K. • Belleville , NJ • January 11, 2019
Replaced Wheel-Tub.
Read more
More
$8.72
- Compare At:
-
$9.59
- You Save:
-
$0.87
Genuine Whirlpool part
By: Whirlpool
Part Number: W10856596
Replace your worn oven door gasket to restore a heat-resistant seal, stabilize temperature, and improve baking performance. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Inner glass of oven door exploded during the self cleaning process Jo Ann C. • Albany , GA • November 10, 2024
Replaced tempered glass and oven seal/gasket.
Read more
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Ge part
By: Ge
Part Number: WD08X10098
This conduit seal fits the dishwasher's water-feed conduit connection, keeping wash water contained and pressure steady to the spray arms. Replacing a worn seal helps address leaks and maintain reliable cleaning performance.
- Seals the joint where the dishwasher's water feed conduit/tube connects within the wash system
- Helps prevent water leaks at the conduit connection point
- Maintains proper wash pressure for consistent spray performance
- Common signs of failure: drips beneath the unit, visible cracks/flattening, or a loose-fitting old seal
What's included: Conduit seal only Install notes:
- Disconnect power and shut off the water supply before servicing
- Access the conduit connection (location varies by model), remove the old seal, and clean mating surfaces
- Lightly moisten the new seal to ease installation and seat it fully
- Reassemble and run a brief cycle to check for leaks
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Ge part
By: Ge
Part Number: WD1X1467
Cushions and seals the dishwasher door vent to route steam safely while protecting the control area. Replace if worn, moldy, or causing leaks.
Do-It-Yourself Stories from Customers like You
Leaking door gasket Toni C. • Waterville , ME • April 07, 2017
I took the inside plate off door. Removed old gasket. Broke styrofoam vent buffernbecause I grabbed it in the wrong place. Ordered both a gasket and vent buffer from your company. It came in 2 days as promised. I had to empty dishwasher of about 2-3 inches of water as with the door apart and knowing it would leak I had to shut off electric supply and hand empty machine first cup by cup and then towel by towel. (Towel method worked well). Then I took a blow dryers to the inside of dishwasher, ...
Read more
More
$13.31
- Compare At:
-
$15.84
- You Save:
-
$2.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003417
Seals the front edge of your refrigerator crisper drawer to maintain proper humidity and keep produce fresh. Replace if worn or cracked. Easy install.
Do-It-Yourself Stories from Customers like You
Crisper drawer slides were broken or missing George M. • Oakland , CA • February 07, 2020
Went online with Appliance Parts Pros. Looked at the drawing found the part numbers. Order them and they were here the next day. No problems from start to finish.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Lg part
By: Lg
Part Number: 1SZZER4002A
This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.
- Secures panels, brackets, and mounting points as specified by the manufacturer
- Replaces screws that are lost, damaged, corroded, or stripped
- Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
- Maintains proper alignment and stability of the assembly
What's included: One screw
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to its original location; start threads by hand to avoid cross-threading
- Use the correct driver; tighten snugly without over-torquing into metal or plastic
- Refer to your model's parts diagram to correct location and quantity
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Ge part
By: Ge
Part Number: WB04T10012
Seals burner assembly to cooktop surface, preventing gas leaks and ensuring proper ignition. Replace if cracked, brittle, or damaged during cleaning.
Do-It-Yourself Stories from Customers like You
Faulty regulator leaky valve Ron K. • N. Hartland , VT • March 09, 2015
Replaced regulator replaced gasket
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Ge part
By: Ge
Part Number: WB1K5157
Hex washer head screw secures oven panels, brackets, and door handles. Replace missing, stripped, or damaged screws to eliminate looseness and rattling.
Do-It-Yourself Stories from Customers like You
Door handles were missing Dianne T. • Tacoma , WA • December 03, 2017
It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them.
Read more
More
$9.88
- Compare At:
-
$10.87
- You Save:
-
$0.99
Genuine Ge part
By: Ge
Part Number: WE4M411
Dryer won't heat or overheating? The temperature switch controls heat settings. DIY-friendly repair—just swap wires and reassemble. Takes 20 minutes.
Do-It-Yourself Stories from Customers like You
The timer was sticking to the point where the knobs were stripping out Peter A. • Dallas , OR • December 16, 2014
I unscrewed the 3 Phillips screws on the back of the dryer controls housing, then it folds forward for access to each control switch. the old one popped out, and I swapped the wires using a needle nose pliers, one by one, from the old switch to the new switch. The part was an exact fit, and popped right back into the housing. I screwed the 3 screws back in, pushed on the new knob, and it looks and works like new !
Read more
More
$64.70
- Compare At:
-
$77.64
- You Save:
-
$12.94
Genuine Frigidaire part
By: Frigidaire
Part Number: 240442708
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Do-It-Yourself Stories from Customers like You
Missing parts Hector R. • York , PA • December 27, 2016
Ordered parts and installed
Read more
More
$9.23
- Compare At:
-
$9.48
- You Save:
-
$0.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 241710601
Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.
Do-It-Yourself Stories from Customers like You
The frif door hinge went missing when I was moving into house due the removing the frig and freezer doors to fit it through the new house door Ian H. • Phenix City , AL • February 03, 2019
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig.
I'm sure to do business again for parts if needed.
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 316001009
Secures the oven door handle to the door or front panel. Replace if your screw is stripped, missing, or damaged to restore a firm grip and proper alignment.
Do-It-Yourself Stories from Customers like You
Renter broke the handle off the oven Brian W. • Brunswick , GA • November 16, 2014
Who does that? I've lived in my house for many years and never have done the damage that a renter can do in just 1 year. Looked up the Serial number and found the parts I needed easily. Ordered them and they arrived in about 3 days. Fit perfectly.
Read more
More
$13.24
- Compare At:
-
$14.56
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: 4210463RW
Flexible narrow brush reaches under and behind refrigerator cabinet to clean condenser coils and vents. Replace worn or missing brush to remove dust buildup.
Do-It-Yourself Stories from Customers like You
Failed condenser motor John F. • New Palestine , IN • February 29, 2016
Replaced bad condenser motor
Read more
More
$29.28
- Compare At:
-
$34.84
- You Save:
-
$5.56