We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Graphic label overlay for your electric range control panel. Replaces worn, peeling, or cracked original to restore clear button legends and a clean finish.
Replaced the overlay with the new part. Read more
Cosmetic overlay that covers and protects your range's control panel surface. Replace if scratched, cracked, peeling, or worn from kitchen use and spills.
Replacement panel overlay and a Dremel to cut loose the melted pushbuttons. Read more
Replace your cracked, unresponsive, or worn oven control panel touch pad. Houses selection buttons and display. Installs on front fascia panel.
So, this is a common problem, and the fourth time I have done this for someone in by neighborhood. Takes about 10 minutes, and requires very little skill. You simply unscrew the oven from it's mount points, pull it out a little bit, remove the four sheet metal screws holding the panel in place, unplug electronics, and plug the new panel in. Just did my neighbors with this one, too 8 minutes for the whole project. Kinda sad the original Whirlpool/Maytag/Jenn-air (they are all the same basically,... Read more
Replaces cracked, dented, or worn oven control panel with faded graphics. Restores clean interface for keypads and displays. Essential when original is damaged.
After an over spill on the range one day, half the buttons on our control panel no longer worked. Well the bake button worked so we kept using that and only using the oven on 350 degrees for almost a year. Well, finally the bake button went the way of the others and the oven would not turn on due to the buttons not working. We bought the Control Panel Part and traded it out. It was a very simple fix...figuring out how to get the built in oven out was harder than this replacement. I think... Read more
This black clock plate is the trim and mounting plate for the range or wall oven clock/timer in the control panel/backguard. It restores a clean, finished look and helps position and support the clock assembly securely.
Control ovn kit Read more
White adhesive clock overlay for oven control panels. Peels off and sticks on to replace cracked, worn, or faded overlays. Easy cosmetic upgrade.
My husband turned the oven to cook one night and there was a loud pop noise. After that there was no power getting to the control board and thus leaving my oven useless I watched the very easy to follow video posted on here associated with my part and I felt confident I would be able to make this repair on my own. I bought the control board as well as the new overlay (mainly cause I didn't want to try and peel off the old overlay and reuse it) the total time for my repair was less than 15... Read more
Replace your cracked, worn, or unresponsive oven control panel touch pad. Installs on the front of your wall oven to restore button functionality.
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
This control panel assembly replaces the white front console on your dryer. It restores a solid mounting surface for the timer, switches, or display so you can select cycles and settings with proper alignment and smooth operation. What it does
Replacing the control panel assembly is extremely easy with one exception. To take off the existing panel (and there is no way to order a button for this, you have to order and replace the entire assembly), you pull the dial knob off (it comes right off, no tools required). There's a single screw underneath, Phillips head. You can then slide the panel up, and then unplug the cable connecting the circuit board to the dryer itself. Next steps: Unscrew the half dozen or so screws to remove the... Read more
Protective overlay for range touch controls. Replaces cracked, bubbled, scratched, or melted overlays from heat exposure or cleaning damage. Installs over control panel.
EOC board was ordered. It was a perfect match!!! As soon as it was replaced, the clock display came on and everything worked as it was supposed to. Thanks. Read more
Black touch pad overlay for gas ranges. Replaces worn, cracked, or faded control panel overlays. Restores appearance and button functionality.
Replaced the control, Read more
Black overlay that adheres to your range control panel. Replace if cracked, damaged, or worn. Peel-and-stick installation over the control board.
The entire control board was replaced. It was quick and easy! The entire repair took a total of 10 minutes, including testing. Be sure to order the new overlay, its permanently stuck to the face of the board. Read more
This replacement control panel, also called the backsplash assembly, is the structural console on the rear of the dryer top where the timer and switches mount. It restores secure control mounting and a clean, finished appearance when the original is cracked or damaged.
Unplugged the dryer. Disconnected the exhaust hose w/ 5/16" nut driver. Removed all knobs. Removed 3 Phillips head screws behind the console. Removed all switches and controls by lifting locking tabs and turning counter clockwise. Installed switches and controls into new console by inserting into hole(s) and turning clockwise until locking tab engaged. Positioned console capture tabs back in their slots and snapped console back in place with the back plate. Re installed the tree screws. Re... Read more
Range membrane touch pad with control buttons located on the front panel. Replace if buttons are unresponsive, cracked, or worn. Includes layers and switch.
Unplugged the stove. I had to remove mounting screws from under front panel. Then Remove the side panels in order to remove the trim. Under the trim there are two gold screws that hold the front panel in place. Unplug the membrane switch and remove the 4 screws that hold it in place. mount the new membrane switch and use plug it in. Then replaced all screws. Plugged stove back in. It took me about 45 minutes to find the final screws hidden under the trim under the side panel. Also make... Read more
Control panel assembly for ranges. Houses display and user interface buttons. Replace when buttons wear out, stop responding, or panel is cracked or damaged.
Reseated ribbon cable; did not fix problem. Replaced front control panel which fixed stove. Read more
Replaces cracked or broken dryer control console back cover. Forms rear housing that supports timer, controls, and shields wiring. Easy DIY fix.
Ordered the faceplate and just for insurance a new switch and know. The installation required a phillips screwdriver, a needle nose pliers, and about 10 minutes of time. Thanks to AppliancePartsPros for getting me the right parts asap...........George Read more
This replacement panel forms the finished control area of your appliance. It provides a sturdy mounting surface for the user interface and protects the electronics behind it, restoring proper alignment, appearance, and protection when the original panel is damaged. What it does:
I took it off and put the new one on. it looks great Read more