Slow Clamp Snowblower Engine Foil Parts
Genuine Ge part
By: Ge
Part Number: WH01X10279
Secures the door boot seal to prevent water leaks in front-load washers. Replace if rusted, broken, or boot becomes loose. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Leaking rubber gasket GE washer model no: wpdh8800j3mg Michael C. • North Truro , MA • January 22, 2024
I replaced the following parts in the GE WASHER that I have owned for approximately 14 years:
Part no.: WH08X10038 - rubber gasket
Part no.: WH01X10277 - inside gasket clamp
Part no.: WH01x10279 - outside gasket clamp
The two gasket clamps were ordered on 1/18/24 and delivered the next afternoon to my front door. I already had the replacement rubber gasket from a long time ago.
I will mention that I have NEVER tried replacing a part on a major appliance. Since the washer machine is 14 years...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316405000
Replace your electric range oven door seal when compressed, frayed, or heat escapes. Maintains temperature for efficient cooking. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Too much heat escaping the door Michael K. • Mechanicsville , VA • June 22, 2016
Removing was easy. Pull out the ends of the seal, the ends aren't locked in. Then, pull up on each retaining clip. Each clip is held in with spring tension.
Reinstallation was easy too. Start on one end, Twist frayed end into cone-like shape and insert into one of the holes for the seal. Push in with a skewer/screwdriver. Insert first clip into the first hole. Go around in a linear fashion, inserting each clip into each hole. After the last clip is pushed in, twist the end of the frayed end...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4861FR3068A
The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.
Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.
Symptoms of a bad clamp include:
- Water leaking from hose connections
- Hoses coming loose or detaching during operation
- Visible rust or damage on the clamp
- Poor water flow or pressure issues
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad bearings seal and spider David R. • Jacksonville , FL • February 04, 2017
If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it.
After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.)
Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4930FR3040A
Supports suspension springs that stabilize the washer drum, reducing vibration and noise during operation. Replace if drum shakes excessively or hits sides. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Lg washer was rocking really badly and the drum was hitting the sides during every spin cycle and even coming off the top spring mount Benjamin M. • Lynchburg , VA • January 18, 2016
Replaced all three dampers and then replaced locking gaskets for the top spring mounts for the drum, replaced the old feet pads I had and works like a charm!
Read more
More
Genuine Ge part
By: Ge
Part Number: WB35X29668
Replace your oven door gasket when frayed, hardened, or heat leaks around the door. Forms an airtight seal to maintain cooking temperatures. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Needed a new gasket around the inside window on the door for my ge profile range Ira G. • Morton Grove , IL • August 15, 2016
The video shown was completely incorrect for the gasket needed on my range.
I had to remove the door, disassemble the inside panel, and remove the old gasket. I suggest you have assistance when doing this. Putting on the new gasket was challenging but not impossible for a do it your selfer.
You should make a video for this gasket so people don't think it is as easy as pulling a few pins around the window!!
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00189322
The Igniter Mounting Clip is an OEM part for Bosch ranges. It secures the igniter to the range top, ensuring it is properly aligned and stable for optimal ignition performance. The surface igniter is crucial for the ignition of gas burners, facilitating an immediate and safe flame to cook with.
Over time, the Igniter Mounting Clip can succumb to various forms of wear and tear, including corrosion from exposure to moisture, degradation from frequent heating cycles, or physical damage during cleaning or maintenance activities.
Symptoms of a compromised Igniter Mounting Clip include:
- The surface igniter becoming loose or dislodged
- Difficulty in igniting the burner or uneven flames
- Noisy or irregular ignition sounds
- Visible signs of damage or corrosion on the clip
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Thermador gas range prg 304us left front burner inop Richard C. • Pflugerville , TX • February 27, 2018
Symptoms: would not light & no gas smell/flow. R&R'd gas solenoid which fixed it. Other parts were in addition to primary inop burner.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB41T10003
Seals oven door to retain heat and improve efficiency. Replace when hard, cracked, or damaged to prevent heat loss. Clips on in minutes—no tools needed.
Do-It-Yourself Stories from Customers like You
Oven needed a new gasket to seal the door. Elizabeth C. • Lakeland , FL • November 24, 2017
Quick and simple fix. Literally about two minutes to remove the old gasket and install the new one.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7212P043-60
Oven door seal creates an airtight barrier to prevent heat loss and maintain proper temperature. Replace when torn, cracked, or loose. Verify fit with model.
Do-It-Yourself Stories from Customers like You
Missing screws and bad sealing door gasket Thomas P. • Palmdale , CA • December 15, 2015
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 297049500
Secures refrigerator drawers to slides for smooth movement. Replace when drawers stick, jam, or fall off tracks. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
The clips holding the freezer baskets to the gliding rails broke on our kenmore elite commercial freezer Yoon C. • Clarksville , MD • May 23, 2016
Removed the old clips and pushed the new ones on without any tools but did put on work gloves to help with grip. I would have had to buy $200 worth of rails because Sears does not sell the clips separately!!
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00189320
The Burner Gasket is an OEM part for Bosch cooktops and ranges. It provides a seal between the burner and the cooktop surface, preventing gas leaks and ensuring efficient operation.
Causes of a bad burner gasket can include wear and tear from frequent use, exposure to high temperatures, or damage from cleaning activities. Over time, the gasket may become brittle or develop cracks, compromising its sealing ability.
Symptoms of a bad burner gasket include:
- Gas odors near the cooktop
- The burner not igniting properly
- Visible cracks or deterioration in the gasket
- The burner not sitting securely in place
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The left front gas burner of our cooktop would't ignite inspite of normal ignition/sparking at all four burners William W. • Madison , WI • January 16, 2016
I ordered a replacement gas solenoid valve, which arrived the very next day with only standard shipping! The shipped part was exactly what was needed, and I also ordered 4 replacement O-rings to replace the original dried out ring for each burner base. These parts also arrived within a few days and were the exact parts needed. The service and advice received was commendable.
Thanks for the great job.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 242135301
Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.
Do-It-Yourself Stories from Customers like You
S or 5 e ce later that changes to s or 5 y ce Amritt V. • Yorkyown , VA • October 21, 2017
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4930JA3091A
Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.
Do-It-Yourself Stories from Customers like You
Two issues water in the bottom of fridge and clicking noise Leroy B. • Colorado Springs , CO • January 19, 2015
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 117158011
Dishwasher door seal prevents leaks by creating a watertight barrier around the door. Replace if you notice water pooling or leaking. Verify fit with your model.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304498835
Replace your range oven door gasket to prevent heat escape and maintain proper temperature. Snaps into place with embedded clips. Confirm fit by model.
Do-It-Yourself Stories from Customers like You
Was brok seal gasket and too old Ang T. • Garden Grove , CA • May 22, 2015
Easy just pull clip and put back
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3184533
Seals the light lens to the oven cavity, blocking heat, steam, and grease from the bulb housing. Replace if cracked, brittle, or missing. Confirm fit.
Do-It-Yourself Stories from Customers like You
Intermitten mini explosions in the oven when trying to use Jerry L. • Canton , GA • December 28, 2015
Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00439671
Secures the door boot seal to the washer front panel, preventing leaks. Replace if broken or when installing a new door seal for proper fit.
Do-It-Yourself Stories from Customers like You
Leaking washing machine replaced rubber door boot.. Gerhard P. • Dagsboro , DE • November 04, 2019
Fixing was easy and took approximately 1 hour. I have a Bosch Axxis washing machine and all parts came exactly as ordered and within 2 days of order. I had to take off front and top panel and the door switch. The new wire and spring was part of the order and I had to pay for it. The old parts looked fine to me and I could have reused them but since I had the new ones, I replaced them anyhow. I wish I would have the option to buy the rubber gasket only.
Read more
More