Light Bulb Parts

Unplugged microwave, sprayed lightly with WD-40, grabbed rim with needle nose pliers and was then able to remove metal screw-in portion. Wiped out socket with rag, replaced bulb. Read more

Took top apart to find out that the problem was just the lens for the light was broken. Come to find out that the lens is what holds the light in place. When the lens broke the light fell down into the base of the cooktop. I bought a light and lens but for the price I could not go wrong. I cannot believe how fast and easy my order was handled!! Awesome company Read more

Inserted new bulb. Read more

Ordered bulb Read more

I ordered 7 new lens caps to replace them all. Took ten minutes to fix. Read more

• Light not working

I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come. Read more

Easy fix. Pulled out the range and disconnected power cord. Unscrewed two screws in front of unit. Tilted smoothtop open toward rear of stove. Propped a piece of wood to keep it open. Removed burned out Indicator bulb and its plastic housing. Disconnected two wires attached. Installed new bulb and its housing attaching the two wires...housing clicked into hole where old one was removed. Closed top and re-attached two screws... Now works fine. Read more

Ordered replacement light module Read more

Had to remove all three food drawers and the back panel behind the drawers (4 screws). The water tank comes with the associated tubing which would typically require access to the back of the fridge to run the new lines. Instead I clipped the existing lines inside the fridge. Then I clipped the lines off the new tank so they would line up with the old lines. I then used a 5/16" OD compression coupling (Lowes or Home Depot) to connect the ends of the tubing together. The joined tubes are... Read more

Ordered Light Lens cover through AppliancePartsPros.com. Fits perfect. Solved my problem. They always seem to have the parts I need. Read more

14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more

Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more

I ordered a new light cover and snapped it into place. Read more

Replaced the broken lens. Read more

I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet! Read more

Your website didn't show the sockets for my model,but I ordered some for a different model and they worked perfectly.I also ordered the correct 30watt bulbs. Read more