Drum Support Roller Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY54414
Maintains belt alignment and tension in your dryer. Replace if pulley is squeaking, seized, cracked, or no longer spinning freely on the shaft.
Do-It-Yourself Stories from Customers like You
Dryer model Maytag SDG515DAWW squeaking Peter S. • Brick , NJ • December 28, 2019
I've had this dryer apart a few times over the years, always got my parts here. Squeaks and igniter if memory serves.
I ordered the two drum rollers that have a bearing in the center..they sit on metal shafts and freeroll. I ordered two..only one was bad but I needed the dryer up in one day, no time to disassemble and decide what to order then wait for parts. Tip: if you order the rollers, there are little washers (nylon?) between the roller and the c clips..don't lose them..they are hard to...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10837625
Motor pulley attaches to the dryer drum motor shaft and grips the belt to spin the drum. Replace if cracked, broken, or worn to restore proper operation.
Do-It-Yourself Stories from Customers like You
Motor pully broke and belt snaped Eric A. • Scottsdale , AZ • December 27, 2014
Replaced
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11025649
Wall mounting plate that secures and stabilizes your over-the-range microwave. Replace if cracked, bent, or missing for safe, proper installation.
Do-It-Yourself Stories from Customers like You
Bought a display model and it did not have the mounting bracket or any other hardware Aj H. • San Antonio , TX • September 03, 2014
Ordered mounting bracket but was surprised to find that the bracket model number had changed many times from the manufacter date of the microwave vent unit. Was hesitant if I was ordering the right part but I trusted the cross referencing of appliance parts pro and I got the exact bracket that I needed
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10340542
Delivers water from pump to upper spray arm in your dishwasher. Replace if cracked, leaking, or has mineral buildup affecting water flow to the spray arm.
Do-It-Yourself Stories from Customers like You
Upper basket rails were falling apart Charles F. • Ashburn , VA • October 05, 2019
While this is a Whirlpool dishwasher, I have the Kenmore Elite version of it. I believe them to be identical for parts. A little background: The first symptom I had of problems was plastic bits from the ball bearing retainer strips in the slides falling out. Then ball bearings falling out. A common problem with this dishwasher. When disassembling the upper basket, some of the gray plastic pieces were very brittle and easily snapped off. So I ended up replacing all of the plastic pieces related...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD30X20110
This rail assembly allows the upper dish rack to slide smoothly in and out of your dishwasher. It provides the track system that supports the weight of dishes while enabling easy loading and unloading. Replace this part if the upper rack is difficult to slide, wobbles, or has become misaligned.
Do-It-Yourself Stories from Customers like You
Dishwasher upper rack right inner rail was not sliding fully. Michael S. • Gettysburg , PA • March 13, 2019
Replaced the upper rack inner rail assembly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822553
Shock absorber mounts to the washer tub to dampen spin cycle vibrations. Replace if cracked, broken, or worn to restore stability and reduce noise.
Do-It-Yourself Stories from Customers like You
Our whirlpool duet washer was very noisy during spin cycles Linda M. • Kiel , WI • September 25, 2014
We looked online at AppliancePartsPros.com under the symptoms and found it was most likely caused by the shocks. Of course there was a repair video showing how to replace all four shocks step by step, and there was a link for purchasing the four shocks at the bottom of the video. Our repair didn't go quite as quickly as on the video because we are novices, but we were able to do the repair ourselves and, once again, saved ourselves a ton of money! Now we have a very quiet washer and dryer again...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE03X31620
Idler pulley for dryer drum assembly. Maintains belt tension to enable smooth drum rotation. Replace if worn, cracked, or causing noise during operation.
Do-It-Yourself Stories from Customers like You
Drum would not rotate intermittently. Robert L. • Cary , NC • May 24, 2019
The Dryer is 10 years old GE Front Load DPVH890JEMG. The drum would intermittently not rotate at the beginning of a cycle and occasionally would rotate but then start and stop throughout the cycle. I did not check error codes, but the windings on the motor were black. So it seemed reasonable that the motor was overheating and sending a signal to the control board to stop. There is one screw under the knob and 9 screws on the front to get inside. I decided to replace the bearings, capacitor,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8539324
Secures the upper spray arm to the rack in your dishwasher. Replace if cracked, broken, or missing to properly support and position the spray arm.
Do-It-Yourself Stories from Customers like You
Broken upper spray arm mount assembly on my dishwasher Keith C. • Boulder , CO • July 10, 2015
I identified the parts I would need online, shopped for price and delivery, and ordered what I needed. I bought the support arm mount assembly and decided to replace the spray arm and tube as well.
Installation was straightforward, although it took me a couple of tries to get the spray arm mount oriented correctly because it is angled to allow the spray arm to miss the deeper glasses channel on one side of the upper rack in the dishwasher. After clipping the arm support and the tube support...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH16X26908
Suspension rod and spring assembly for top-load washers. Mounts between cabinet and wash basket to absorb vibration. Replace if worn, stretched, or broken.
Do-It-Yourself Stories from Customers like You
Out of balance when trying to go into spin cycle. Ken R. • Eugene , OR • August 18, 2020
Cleaned off the oil or grease that somehow was all over the drive belt. Installed new drive belt.
Installed 2 new left (blue) and 2 new right (red) rod and spring assembly.
This fixed the out of balance issue during spin cycle.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10247710
This kit includes suspension rods and dampers that support the wash tub inside a top-load washing machine, absorbing vibration and movement during the spin cycle. The rods connect the outer tub to the cabinet frame to keep the tub centered and stable. Replace this kit if your washer shakes excessively, makes loud banging noises during spin, or if the tub appears to hang unevenly.
Do-It-Yourself Stories from Customers like You
I had a unbalance issues and then lid lock issues no codes Linn P. • Dixon , IL • October 14, 2014
I read through the issues related to my problems. I purchased both parts so if one was fixed then the other still needed to be fixed I would have the part. I watched both videos for replacing the parts which made things so much easier. I will say prying in the front clips was the biggest issue out of the whole repair. I repaired the suspension issue by replacing the 4 rods. The very last rod that I replaced was indeed bent. I closed the top and ran one load and then the lid lock issues...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH16X26909
Left suspension rod and spring assembly that supports and stabilizes the washer tub. Replace if worn, damaged, or causing excessive vibration noise.
Do-It-Yourself Stories from Customers like You
Out of balance when trying to go into spin cycle. Ken R. • Eugene , OR • August 18, 2020
Cleaned off the oil or grease that somehow was all over the drive belt. Installed new drive belt.
Installed 2 new left (blue) and 2 new right (red) rod and spring assembly.
This fixed the out of balance issue during spin cycle.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH03X32218
Motor pulley with nut for top-load washers. Transfers power from motor to drum. Replace if pulley teeth are stripped, cracked, or sheared off.
Do-It-Yourself Stories from Customers like You
The washer would not spin. Clayton B. • Calhoun , LA • October 13, 2023
Replaced thr motor pulley and transmission pulliey and belt.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11400156
Four suspension rods with bushings that secure the washer tub and absorb vibrations. Replace if rods are cracked, worn, or bushings are damaged.
Do-It-Yourself Stories from Customers like You
Horrible vibrations when rinsing Ralph C. • Ontario , CA • October 11, 2026
Replacement suspension rods did the trick
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268743
Replace cracked or broken dishwasher upper rack wheels. Attaches to the upper dishrack and glides along tracks for smooth loading and unloading access.
Do-It-Yourself Stories from Customers like You
The upper dishrack wheel broke. Joseph V. • Middletown , NJ • November 25, 2020
I originally ordered this part from the KitchenAid website because I assumed I needed to buy the part directly from them since they manufactured my dishwasher. Five minutes after ordering the part from them, I went on Youtube to see if there was a video instructing on the installation of the upper dishrack wheel since I wanted to make sure I installed it correctly. I saw the AppliancePartsPros.com video related to this part. I then checked the APP website and found the part for $11.00 less....
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11130356
Suspension rod kit connects washer drum to chassis for vibration control. Replace if rods are worn, broken, or detached causing instability during spin.
Do-It-Yourself Stories from Customers like You
Not sure but constantly out of balance Jeff A. • Lakeland , FL • May 11, 2026
Replaced the suspension rods
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8547174V
Idler pulley assembly mounts near the motor to maintain tension on the dryer belt. Replace if the pulley wheel is cracked, worn, or no longer rotating.
Do-It-Yourself Stories from Customers like You
Our dryer was squeaking like crazy Steve H. • Long Beach , CA • February 25, 2016
Our dryer was making such a load noise that we deemed it unusable. We weren't sure if something would burn up if it continued like it was. So I checked a few articles on the internet and everything pointed to most likely the drum belt. Ours looked a little worn but not really that bad so I got the part. I then followed the repair video that AppliancePros had posted for my model (which was great) and installed the belt. Still squeaking. So I went on to #2 on the list of possible problems, the...
Read more
More