We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Washer won't start or stops mid-cycle? This main control board restores cycle selection and timing. Common DIY fix, takes about 10-20 minutes to install.
I replaced the belt and the pump. It now works like it is new again! I am glad that I purchased the belt installation tool. It made replacing the belt very easy. I also purchased the Control Assembly which I did not install. It wasn't needed to repair the washer but I will keep it in case it is needed for future repairs. Of the 3 different web sites I looked at, AppliancePartsPros was the best price and the parts were at my house in 2 days. I will use AppliancePartsPros again if and when I need... Read more
Fix fluctuating temperatures, fault codes, clicking noises, or no display lights with this refrigerator electronic control board. Moderately complex repair.
Fix a refrigerator that won't cool, shows error codes, or has temperature control issues. This electronic control board regulates defrost and compressor cycles.
The parts I ordered from you worked and got hereon time, great job, and thanks again. I will. use you again in the future Thanks again Read more
Fridge warm but freezer cold? Frost buildup on coils? Your defrost timer may be failing. This control manages automatic defrost cycles. 15-min DIY fix.
I am not new to APP, fixed a tub belt on a Maytag dryer in the past. My frig started getting warm so I went onto to one of those "lists" sites and found a appliance repair place. The guys were great and came out right away. The tech said it was the cold control and $260 later my part was replaced, about 30 minutes. Great I thought until my frig started getting warm again. Those cold sensors on the beer bottles are a great indicator. Not wanting to spend another $260 I looked up on APP to see if... Read more
Range won't heat or display is blank? This electronic control board manages temperature and oven functions. DIY-friendly repair, typically 10 minutes.
I found exploded parts view of oven and looked for oven sensor probe and control card parts. I also looked at great videos and read past repair stories. I decided the problem had to be one of the two parts (probe or card) and ordered both. I decided that the probe should be changed first rather than involve a circuit card. I changed the probe and tested the oven and it works again. Read more
Fix a dryer that won't start, stops mid-cycle, or won't shut off with a new timer. Controls drying cycles and timing. 15-30 minute DIY repair.
Ordered both parts and got them in 2 days, removed 3 screws on back panel of dryer and removed defective timer , installed wires on new timer and put back in place and installed new knob , very easy repair only took 10 minutes and dryer was back up and running Read more
Fix frost buildup in your freezer with a new defrost timer. This part controls the automatic defrost cycle to prevent ice on evaporator coils.
Replace defrost timer Read more
Dryer won't shut off or advance through cycles? A faulty timer prevents automatic cycle progression. Moderate DIY repair restores timed operation.
Replaced timer, thermostat, a thermal fuse, the pair of thermal cutoff switches and finally the heater element. Hard to say what the final fix was that did the trick -- I am guessing it was the heater element although the old one appeared to have good continuity. All praise goes to the on line chat Pros Erica B and Robin C that took considerable amount of time and effort to help me decipher the problem. For that alone, Appliance Parts Pros will be my go to source for appliance parts for the... Read more
Fix a dishwasher that won't start, stops mid-cycle, or won't drain properly. This electronic control board manages all dishwasher functions and cycles.
Replaced electronic control board and everything is back to working normally. Read more
Fix a dryer that won't start, stops mid-cycle, or runs too long. Replacing a faulty timer is straightforward—snap in the new part after unplugging.
Replaced timer. It's a snap in place timer, once you remove the defective timer, overall pretty easy. Read more
Fixes refrigerator not cooling, flashing lights, ice/water dispenser failure, or interior lights not working. Direct replacement takes 10-15 minutes.
First I called the local retailer to ask about a non-warranty service. Minimum $100 charge. Figured I would take a shot at the repair as I had fixed the fridge once before. I used a digital thermometer to verify that the temperature in the ice maker compartment was at the right temperature. I put the ice maker in diagnostic mode to eject the ice that was sitting in the ice tray (turn off and on and then push the ice full lever three times). Ice was successfully ejected. Sometimes the ice... Read more
Fixes dishwasher not starting, no power, or cycle issues. This control board manages all wash cycles and operations. Moderately difficult repair.
I replaced the Machine Control Board and both wiring harnesses. Read more
The Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It contains a touchpad and electronic controls that operate wash cycles and drying features. Causes of a faulty switch assembly can involve water exposure inside the door control area leading to circuitry corrosion over time. Symptoms of a bad switch assembly include:
This OEM Frigidaire replacement part is also compatible with dishwashers manufactured by Electrolux, Gibson, Kelvinator, and some Kenmore models.
Replace control/switch panel along with exterior push button panel. Read more
Fix a refrigerator that won't cool or has inconsistent temperatures with this inverter control board. Moderate DIY repair with step-by-step video guide.
Replaced the Inverter box Read more
Fix F11 or F13 error codes, blank display, or total control panel failure. This gas range circuit board restores oven timers and functions. DIY-friendly.
We simply removed the back panel off the stove, removed four screws and unplugged the controller. It was so quick and easy. It took about five minutes to replace. Read more
Washer won't advance through cycles or stops mid-wash? This timer control assembly manages fill, agitate, rinse, and spin sequences. 15-30 minute repair.
I replaced the Timer knob components. Removing the cover that contains the Timer was simpler than I anticipated. Just remove the screws on the top of the back of the machine. Hold the cover and lift up and push to the left (facing the front of the washer). Removed the Timer Knob Clip with small needle-nose pliers. Grasped the Timer and turned counterclockwise to remove and unplugged the wiring clip. The timer is seated to the cover and held securely in place with one screw. I seated the new... Read more