Power Small Engine Spark Plug Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786100
This moisture sensor consists of two metal strips typically mounted inside the dryer drum area that detect the moisture level in clothing during a drying cycle. It signals the control board to end the cycle when clothes reach the desired dryness. Replace this sensor if your dryer shuts off too early with clothes still damp, runs too long, or if the auto-dry cycle no longer functions properly.
Do-It-Yourself Stories from Customers like You
The sensor-moisture clip was broken off and needed to be replaced. Edgar D. • Bradford , AR • April 06, 2014
Simple unscrewed the set screw, removed the broken sensor-moisture part, attached the leads, and reattached the part to the back of the dryer. Took about 4 minutes.
Read more
More
$78.95
- Compare At:
-
$93.16
- You Save:
-
$14.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001762
Dryer won't start or run? A blown thermal fuse is the likely cause. This safety component cuts power if temperatures get too high. Easy 15-min fix.
Do-It-Yourself Stories from Customers like You
Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020
Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short...
Read more
More
$48.46
- Compare At:
-
$57.18
- You Save:
-
$8.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224430
The Dispenser is an OEM part for Whirlpool dishwashers, integral to the appliance's operation by dispensing detergent and rinse aid during the wash cycle. This component ensures that the right amount of cleaning agent is released at the correct time, contributing significantly to the effectiveness of each wash.
Causes of dispenser failure include cracked internal components from repeated door openings, mineral buildup clogging dispenser parts, or electrical malfunctions preventing dispensing functions.
Symptoms of a malfunctioning dispenser include:
- Detergent not being released during the cycle
- Rinse aid leakage or inconsistent dispensing
- The dispenser door sticking or failing to open
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My dishwasher detergent dispensor door was not opening during wash cycle and the control panel was loose because the plastic mounts for the screws were broken Reed W. • Eldon , MO • November 11, 2014
I ordered a new detergent dispenser and control assembly, watched a few videos on you tube and dived in. The repairs were pretty simple once I got started and while I was doing this I went the extra step and cleaned out the drain. I would suggest doing this annually. Pretty simple to do and only 5 screws to get to the drain and the grinder. I found plastic and several other things that would not allow the dishwasher to drain properly and probably part of the problem of dishes not getting...
Read more
More
$140.95
- Compare At:
-
$166.32
- You Save:
-
$25.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399849
Dryer won't heat or start? A blown thermal fuse is often the cause. This safety component is a simple DIY fix taking about 5-10 minutes to replace.
Do-It-Yourself Stories from Customers like You
No heat Kathy D. • Clarence , NY • April 23, 2014
Replaced Thermal Fuse
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3391912
Dryer won't heat or shuts off early? The high limit thermostat monitors temperature and cuts power when overheating occurs. DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
My maytag gas dryer would start and the the tumbler rotate but the igniter would not glow and flame not start .gil P. • Enumclaw , WA • March 29, 2015
The 2 sensors that sit on top of the flame tube work together. The Thrmst F should check closed, as should the Cutoff-TML, in order for power to flow to the ignitor. If the Cutoff is open, it is usually because the Thrmst-F did not open soon enough. The Thermst-F will cycle, closed to open, and repeat, however the Cutoff-HTML is a one time switch. If it opens it will not return to closed, and subsequently the ignitor will not glow.
Some professionals say that if one of these sensors fail, both...
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3372028
Fix a detergent lid that won't stay closed or open properly with this dispenser lid pin. Simple repair with video guide—most DIYers complete in minutes.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
$10.71
- Compare At:
-
$12.74
- You Save:
-
$2.03
Genuine Speed Queen part
By: Speed Queen
Part Number: D510523
Fix dryer overheating issues with this thermistor assembly. Monitors temperature and sends readings to the control board. DIY-friendly repair part.
More
$28.49
- Compare At:
-
$34.19
- You Save:
-
$5.70
Genuine Ge part
By: Ge
Part Number: WD12X24637
Detergent not dispensing or dishwasher door won't close? This dispenser module releases detergent at the right time. Moderate DIY repair difficulty.
Do-It-Yourself Stories from Customers like You
Replace broken detergent module on a 6 month old GE dishwasher Timothy A. • Akron , IA • September 29, 2020
Watched you tube video, fixed with no problem.
Read more
More
$76.65
- Compare At:
-
$91.21
- You Save:
-
$14.56
Genuine Frigidaire part
By: Frigidaire
Part Number: 154388801
This is the cap that seals the rinse aid reservoir on the dishwasher door. It keeps rinse aid contained so it dispenses properly during the rinse cycle. Replace this cap if it is cracked, missing, or no longer seals tightly, which can cause rinse aid to leak out prematurely and result in spotty or poorly dried dishes.
Do-It-Yourself Stories from Customers like You
The dishwasher left by tenant with the cover panel loose on the left the door hyperextending a bit when opened. Marlena R. • Star City , IN • July 07, 2021
Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched....
Read more
More
$36.95
- Compare At:
-
$44.34
- You Save:
-
$7.39
Genuine Ge part
By: Ge
Part Number: WE1X21975
Dryer won't start or run? A blown thermal fuse is often the cause. This safety part cuts power when overheating occurs. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Didn’t go on. Christina S. • Levittown , NY • February 16, 2018
The part I ordered fixed my problem
Read more
More
$30.43
- Compare At:
-
$36.52
- You Save:
-
$6.09
Genuine Ge part
By: Ge
Part Number: WE4X448
The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.
Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.
Symptoms of a bad flame sensor include:
- The dryer not heating or taking longer to dry clothes
- The dryer shutting off unexpectedly during a cycle
- The igniter glowing but not igniting the gas
- Error codes related to heating or ignition issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer heating for only a short time then no heat at all David N. • Fairfax , CA • December 08, 2018
GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes.
Also, the old solenoids tested...
Read more
More
$79.95
- Compare At:
-
$95.14
- You Save:
-
$15.19
Genuine Ge part
By: Ge
Part Number: WE4M216
Dryer won't heat, overheats, or shuts off mid-cycle? A faulty cycling thermostat often causes these issues. Easy DIY fix with our video guide.
Do-It-Yourself Stories from Customers like You
Intermittant heat. Raymond L. • Mebane , NC • March 18, 2014
Tested the old t-stat with ohm meter. When shaken, the contacts would open. Replaced it with new t-stat and it works fine now. Thanks!
Read more
More
$88.66
- Compare At:
-
$105.51
- You Save:
-
$16.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378138
The Dispenser Lid is an OEM replacement part for Whirlpool dishwashers. Located at the top of the dishwasher door, it provides access to add detergent and rinse aid to the internal dispenser compartment below. This dishwasher soap dispenser lid is included in the dispenser cover kit 4387043.
Causes of a bad dispenser lid can include wear and tear of hinge points from years of repeated openings. Cracks may also arise in the plastic material.
Symptoms of a bad Dispenser Lid include:
- Difficulty fully opening or closing the lid securely
- Leaks or spills occurring from around the sealing edges
- Potential cracks that compromise lid integrity or function
- Hinges that are loose or fail to support the lid in position
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Amana, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Soap dispenser lid spring wasn't opening lid Frank D. • Philadelphia , PA • December 22, 2014
I watched the video on your site and it showed step by step how to replace the spring. Excellent shipping time. Good customer service on chat forum.
Read more
More
$23.61
- Compare At:
-
$27.86
- You Save:
-
$4.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876529
Soap not dispensing or lid won't open during cycle? This dishwasher dispenser assembly releases detergent and rinse aid at the right time. Moderate DIY.
Do-It-Yourself Stories from Customers like You
Dispenser spring was weak or broke James S. • Clinton , MS • July 26, 2025
Replaced dispenser
Read more
More
$104.34
- Compare At:
-
$123.12
- You Save:
-
$18.78
Genuine Frigidaire part
By: Frigidaire
Part Number: 137116700
This high limit thermostat is a safety device that monitors the temperature inside the dryer and cuts power to the heating element if the temperature exceeds a safe threshold. It is typically mounted on the heating element housing or exhaust duct. Replace this thermostat if the dryer is not heating at all or if it overheats - a tripped high limit thermostat often indicates a clogged vent or restricted airflow that should also be addressed.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer error e66 then door open Nolan R. • Hoboken , NJ • February 06, 2017
My Electrolux Frigidaire Gas Dryer stopped working and I got an error code E66 that the thermal limiter blew from over heating. The E66 code stops displaying after the initial code and you will then get a door open message. I replaced the thermal limiter and the thermostat just to be sure which part at the problem. The job is hard because you have to take apart the entire dryer and remove the drum. Would be a tough project to complete on your own.
Read more
More
$50.56
- Compare At:
-
$60.17
- You Save:
-
$9.61
Genuine Ge part
By: Ge
Part Number: WD30X10020
Roller bearing cage installs in the dishwasher rack track to support smooth gliding. Replace if cracked, broken, or causing the rack to stick or slide out.
Do-It-Yourself Stories from Customers like You
Instructions to replace wd12x10304 (ap4484666) roller bearings Richard L. • Webster , NY • February 18, 2016
I did not see the old ones fall out, so I was not sure the exact product placement within the rail, which was frustrating, to say the least.
For the next person's benefit....these slide into the MIDDLE of the rail that is attached to both sides of the dishwasher. Not the front, not the back, but the middle!
Steps to fix:
1) Order 2 of these Roller Bearing Cage.
2) Order 4 of WD12X10304 (AP4484666) end caps!! Unless you have brand new ones already, you will need them for sure and they are...
Read more
More
$34.95
- Compare At:
-
$41.94
- You Save:
-
$6.99