Ce Snowblower Regular Starter Parts
Genuine Speed Queen part
By: Speed Queen
Part Number: 55882
This is a start switch intended for use with dryers. With time or because of damage caused by accident, the start switch may stop working correctly. If the start switch isn't working, then the dryer will not function properly, and a replacement part should be ordered. If the push to start switch doesn't respond, it could be damaged or broken. Replacing the push to start switch on a dryer is a simple process. Start by unplugging the machine. Remove the back panel and pull out the old push to start button. Put the new button in its place and reattach the rear panel. Wear gloves for protection. Restore power only after the complete reassembly is performed. This push-to-start button is a genuine OEM replacement part. It is sold as an individual unit. The part is sourced from the manufacturer and made of durable materials. The push-to-start button can be installed in various dryer models made by SpeedQueen and Alliance brands.
Do-It-Yourself Stories from Customers like You
Would not start. The start button had fallen into the dryer. Chris B. • Brillion , WI • January 02, 2023
Replacing it couldn't be easier. Two screws to remove the control panel and swap out the Start Switch.
Read more
More
$51.59
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694419
This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:
- Produces audible tones for cycle end, timers and other appliance notifications
- Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
- Helps you hear and identify completed cycles and timed alerts
- Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
- One adjustable buzzer kit
Install notes:
- Disconnect power before servicing to avoid shock risk
- Access may require removing the control panel; keep fasteners organized for reassembly
- Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
- Test buzzer function with power restored before fully reassembling
Do-It-Yourself Stories from Customers like You
My electric dryer wasn't heating during drying Deborah H. • Athens , MI • January 20, 2020
I was looking for a parts sight and found yours. I started to watch all the video tutorials on each part and the "check these connections first video". Well by doing this I was able to find the source of my problem. What I thought was the heating coil not working right, ended up being the timer that was bad!!! I am so very happy with your sight and the step by step videos that were the success to being able to do this on my own.
Read more
More
$71.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002784
Fixes clicking noise from compressor and fridge not cooling. Includes relay, overload protector, and capacitor. Most DIYers complete in 20-30 minutes.
This part fixes the following symptoms
-
Freezer section too warm
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Cooling dropped off in the fridge but the freezer was still working then freezer temps dropped David H. • Colorado Springs , CO • September 19, 2014
Thawed out the evap/heat exchanger assembly, replaced the overload/relay kit as well as the defrost control board and the fridge was back in business, everything working fine.
I'm kicking myself for not ordering these parts earlier. there was a clicking sound coming from the compressor that I ignored which was a huge mistake.
Read more
More
$102.32
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002794
Refrigerator making clicking sounds and not cooling? This overload relay kit fixes compressor start problems. Easy DIY repair—pull off old relay and install.
Do-It-Yourself Stories from Customers like You
My compressor relay on my refrigerator failed Jared W. • Mchenry , IL • February 19, 2015
I was able to pull off the old relay and swap out with the new relay. Everything went together perfectly.
Read more
More
$111.44
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8543274
Dryer won't start when you press the button? This push-to-start switch closes the circuit to begin cycles. Easy DIY repair restores reliable starting.
Do-It-Yourself Stories from Customers like You
Start switch replacement George Z. • Sebastian , FL • December 14, 2020
I have an old dryer. My wife wanted a new washer and dryer but I keep repairing the old ones. Not because I have to, but because I want to, it's personal now. Can't let my old dryer beat me down. We have pushed that old Start-Stop switch so many times it just wore out. Bing-bang-boom...it was simple.
Read more
More
$56.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: EBF61734701
This micro switch is a compact, snap-action electrical switch that sends an on/off signal when a lever, latch, or paddle is moved. Replacing a worn switch restores reliable detection and control response for the affected function.
- Converts mechanical movement into an electrical open/close signal to the control
- Commonly used for lever/paddle actuators, latches, or interlock detection within the appliance
- Safe symptom clues: no response when actuated, intermittent operation, or a function stuck on/off
- Physical clues: weak or absent "click" when pressed, heat discoloration or damage at terminals
What's included: 1 micro switch
- Disconnect power before servicing; if the product is connected to a water line, close the supply valve
- Note wire positions and terminal labels (COM/NO/NC); transfer wires one at a time to matching terminals
- Match the actuator orientation and mounting position to the original for proper operation
- After installation, verify continuity with a multimeter and test function before reassembly
Do-It-Yourself Stories from Customers like You
Sensor on dryer and refridgeator bad Perry S. • Jackson , TN • November 14, 2015
Take section applicable apart, test and replace parts.
Read more
More
$21.72
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE4M406
Dryer won't shut off in auto dry or only heats on one setting? This temperature switch restores proper heat level control. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Temperature switch wasn't working on medium and high Thomas H. • Coquille , OR • January 19, 2017
Replaced temp switch
Read more
More
$90.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WR60X25785
This evaporator fan blade mounts on the fan motor and circulates cold air across the evaporator coils and throughout the compartments. Replacing a cracked, warped, or loose blade restores proper airflow and stable temperatures.
- Moves air across the evaporator to distribute cooled air evenly
- Helps maintain consistent refrigerator and freezer temperatures
- Common symptoms include weak or no airflow, warm spots, frost buildup on the evaporator cover, and rattling/scraping noises
- Replace if the blade is damaged or spins loosely on the motor shaft
What's included: 1 evaporator fan blade Install notes:
- Disconnect power before servicing
- Remove shelves/bins and the rear evaporator cover to access the fan
- Note blade orientation and seating depth; pull the old blade straight off the motor shaft
- Press the new blade on until fully seated; verify free spin and proper clearance before reassembly
Do-It-Yourself Stories from Customers like You
Evaporator fan blades broke. Michael G. • Eastborough , KS • January 09, 2021
Ordered a new fan.
Read more
More
$14.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707712
Refrigerator won't cool or compressor won't start? This compressor start relay energizes the start winding to restore cooling. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Starter Charles S. • Lithonia , GA • November 25, 2019
Replaced starter and compressor run capacitor.
Read more
More
$63.65
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WR07X10133
Fix a refrigerator that won't cool and clicks every few minutes. This start relay and overload assembly mounts on the compressor to restore reliable starting.
Do-It-Yourself Stories from Customers like You
Refrigerator not cooling and clicking sound every 25 minutes, had same problem on another refrigerator several years back so knew it was the start relay James G. • Huntington Beach , CA • September 06, 2021
Pulled the relay off of the condenser motor (3 pin connection) and removed 2 wire feeds. Reversed the procedure for the install. Ordered the new relay and decided to replace the run capacitor as well just to be safe. Appliance Parts Pros was a really good website to help identify the 2 part numbers and see pictures that confirmed they were the same as the original. Price was competitive with others.
Read more
More
$47.77
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002782
Refrigerator not cooling or making clicking sounds? This compressor relay and overload kit fixes starting issues. DIY repair takes about 30 minutes.
Do-It-Yourself Stories from Customers like You
About 9:30 pm on a friday night two weeks ago i noticed my freezer part in the refrigerator was not holding the cold and ice cream had become liquid! Hemant P. • Arlington , VA • September 12, 2014
I have a Maytag Model PTB1952GRQ Serial Number 11003378AJ Top / Bottom refrigerator. It suddenly stopped working and would no longer be freezing / cooling as a result of a failure of the compressor not starting. I was very upset and went to the web site of appliancepartspros.that had a lot of helpful information available. I also visited many other sites and researched / read and looked at all kinds of information on the we sites. A lot of information was pointing to the fact that the...
Read more
More
$75.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WE4M412
Fix a dryer that won't start or starts intermittently with this start switch replacement. Restores the start circuit for reliable operation. Easy DIY fix.
More
$117.52
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10805623
Refrigerator clicking but not cooling? A failed compressor start device causes repeated clicking and warm temps. Quick DIY fix restores reliable starts.
Do-It-Yourself Stories from Customers like You
Refrigerator compressor would click on and off repeatedly Stuart R. • Benton , KY • September 11, 2016
Replacing the start device corrected the concern.
Read more
More
$68.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4314961
Color: Black. Instruction sheet included.
Do-It-Yourself Stories from Customers like You
The dense pack rocker switch on our whirlpool compactor broke after 28 years Jane G. • Hubbardston , MA • August 21, 2016
Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!!
Read more
More
$53.21
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201647
Refrigerator not cooling or won't start? A failed compressor start device prevents startup. DIY repair in under 30 minutes restores reliable cooling.
Do-It-Yourself Stories from Customers like You
Refridgerator/freezer not cooling fan runs Darren K. • West Greenwich , RI • April 16, 2016
Perform compressor ohm test, perform start relay test, replace relay
Read more
More
$86.55
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB27K10298
Fixes cooktop display issues and control failures caused by power supply problems. This transformer converts household voltage for stable operation.
More
$92.95
IN STOCK
Most orders arrive by Wednesday, November 25