Stud Parts

I replaced the dishwasher lower rack wheel support spindles on most of the existing wheels. The new spindles are more robust and positively secured than those I replaced. Now the lower rack slides like a charm. I am delighted with the web site, the price, the product, and the delivery time (next day)... in other words, the while experience! Read more

We purchased both the roller studs and new rollers for all of the slots on the lower rack. They came two days later and I was able to easily click them into place and the lower rack now rolls smoothly and securely. I only wish I hadn't lived with it in the broken stage as long as I did - such an easy and affordable fix. Read more

Ordered new frame, wheels and SS slide for the bad side. Job was done in 10 minutes and the rack now works smoothly. Read more

Replace all 8 of them with the ordered parts. No big deal. Your provided repair-video was a big help! Thanks! Read more

I removed the basket, studied the old adjusters before removing them, and installed the new ones using some of the old parts(adjustment levers and the covers). adjusters work like a charm.. the only tool required was a screwdriver with removable torque bit. Read more

Removed old rollers and axels and installed new ones. Used needle nosed pliers to remove old axles and rollers and put new ones on by hand, just snapped them onto the rack frame and pushed new wheels onto the new axles. Discovered that the end caps of the metal guide that the rollers move in just rotate out on a hinge principle in order to remove the rack in order to put the new rollers on. Read more

Un plugged dryer. It was an easy fix, popped the top up. Removed the two screw that held the front on and also unclipped the door switch. Released tension that was on belt and removed drum. Removed old front slides cleaned up area and replaced them. Popped the ring that held the rear drum wheels and placed the new ones with a dab of grease. Un hooked tension spring for idler and removed old one and put the new one in. Make sure you place it through the correct hole and it makes it firmly into... Read more

Part needed replacement Read more

After replacing the belt less than a year ago, when it broke again we started to think something may be going on with the idler pulley. Ordered a new belt and pulley wheel, only to have the belt break again the very next day. After a call to customer service explaining the situation, they replaced the belt and pulley wheel which were both under warranty, and suggested replacing the arm itself. We also had to replace the interlock switch. Parts arrived quickly. The repair itself took about an... Read more

Decided to order the kit with both rollers even thou the right one looked OK.Also ordered the pulley for the idler. Watched the video for the pulley installation,super helpful on a couple of the steps!! Everything went great. A 14 year old dryer still has life! Parts ordering and delivery was also great!!! Thank you. Read more

I took the tumbler drum out and looked at the pulley and it was not rotating freely. The idler arm had some wear on the attached post so I replaced bothe parts. Since I was in there already I replaced the drum rollers and dryer belt for good measure. I reassembled the dryer and it works great. The best part of the experience was the parts order. I ordered the parts around 3:00 pm one day, standard shipping, and they were on my doorstep around 1:00 pm the next day. I'm still wondering... Read more

Replaced front drum roller wheels and rear drum bearing.Pull plug. Remove 2 screws holding top panel,slide rearward and lift panel off. Remove all screws from back panel,wiring cover and cord clamp. Remove back panel and feed cord through hole.No need to remove cord. Remove 2 screws from heater box and let it drop rearward.Remove belt from motor pulley and let tensioner rest against motor pulley.This step will trigger the switch that disables motor if belt breaks.The switch does not reset... Read more

Replaced left hand rack adjuster. Read more

I replaced it with the wheel I ordered from AppliancePartsPros.com Read more

I removed the basket, studied the old adjusters before removing them, and installed the new ones using some of the old parts(adjustment levers and the covers). adjusters work like a charm.. the only tool required was a screwdriver with removable torque bit. Read more