Power Strike Small Engine Regular Starter Parts
Genuine Speed Queen part
By: Speed Queen
Part Number: 205222
If your washer won't start or stops mid-cycle, the lid lock may be faulty. This kit includes the lock assembly and mounting hardware for secure operation.
More
$104.57
- Compare At:
-
$125.48
- You Save:
-
$20.91
Genuine Whirlpool part
By: Whirlpool
Part Number: W11670519
Replacement lid lock for top-load washers. This 120V assembly secures the lid and reports its status to the control, restoring safe operation, proper spin speeds, and normal cycle progress when the original latch becomes intermittent or fails.
- Locks the lid during spin and agitation for user safety
- Detects lid position and sends closed/locked status to the control board
- Helps the washer reach and maintain proper spin speeds
- Common failure symptoms: lid won't lock/unlock; lid lock light flashing
- What's included: 1 lid lock assembly
Install notes:
- Disconnect power before servicing
- Access the lock at the top/front rim; remove fasteners and the connector, then swap the assembly
- Route wiring exactly as original and secure it to avoid pinching or chafing
- Verify lid strike alignment and run a short test cycle to confirm lock operation
Do-It-Yourself Stories from Customers like You
Maytag locking mechanism broke so machine would not function Sandra M P. • Rancho Palos Verdes , CA • August 16, 2026
We ordered a new locking mechanism, latch and cover, and followed the directions that we found on UTube.
Worked perfectly.
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861642
Fix F5 E3 error code or lid won't lock issues with this washer lid latch assembly. Direct replacement part. Most DIYers complete this repair in under 10 minutes.
Do-It-Yourself Stories from Customers like You
E3 F5 Stacy J. • Elk Grove , CA • August 03, 2018
In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again.
Read more
More
$110.42
- Compare At:
-
$131.40
- You Save:
-
$20.98
Genuine Ge part
By: Ge
Part Number: WE4M448
Dryer shuts off mid-cycle or overheats? The outlet control thermistor monitors exhaust temperature. Moderately difficult repair requires drum removal.
Do-It-Yourself Stories from Customers like You
GE profile dryer shut off mid cycle Mark A. • Boynton Beach , FL • February 01, 2021
My first attempt was to replace the main board and then the thermistor, should have done this the other way around, turned out it was the thermistor, a pretty cheap part, dryer works great now. Repair requires removing the drum but overall not too difficult or time consuming.
Read more
More
$52.73
- Compare At:
-
$62.75
- You Save:
-
$10.02
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404233
Dryer won't start when you press the button? The start switch initiates the drying cycle. Simple 10-minute DIY fix with basic tools and our guide.
Do-It-Yourself Stories from Customers like You
Timer & start switch had failed on my whirlpool dryer Richard H. • Davenport , FL • November 07, 2014
Identified the parts I needed on the AppliancePartsPros.com website using the Dryer model number. Delivery was within 3 days by courier - excellent. Parts fitted, console reassembled and my dryer was back up and running within 40 minutes. No more intermittent problems with the timer not working - brilliant!!
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8573713
Dryer won't heat? A failed thermal cut-off fuse cuts power when temps spike. DIYers replace this safety part in 20-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My maytag gas dryer would start and the the tumbler rotate but the igniter would not glow and flame not start .gil P. • Enumclaw , WA • March 29, 2015
The 2 sensors that sit on top of the flame tube work together. The Thrmst F should check closed, as should the Cutoff-TML, in order for power to flow to the ignitor. If the Cutoff is open, it is usually because the Thrmst-F did not open soon enough. The Thermst-F will cycle, closed to open, and repeat, however the Cutoff-HTML is a one time switch. If it opens it will not return to closed, and subsequently the ignitor will not glow.
Some professionals say that if one of these sensors fail, both...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Ge part
By: Ge
Part Number: WR08X10025
Fixes a refrigerator that won't cool or makes clicking sounds but compressor won't start. This overload protects your compressor from overheating damage.
Do-It-Yourself Stories from Customers like You
Refrigerator stopped cooling/fan ran but compressor did not start Todd M. • Palm Bay , FL • August 10, 2015
Refrigerator made a clicking sound in box connected to compressor. Googled it and found the reason could be the 2 parts I ordered. Replaced them and it runs fine now.
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Samsung part
By: Samsung
Part Number: DA34-00004D
Refrigerator compressor won't start after power surge? This overload protector prevents electrical damage to your compressor. DIY repair in 30 minutes.
Do-It-Yourself Stories from Customers like You
Fridge and freezer not working on Samsung rfg237aars/xaa. Edward O. • Mansfield , MA • January 01, 2021
Took a bit to diagnose. First tried cleaning coils but the problem still persisted. Next took of the back panel and put the system into diag mode. (Press energy save button and fridge button for eight seconds system ding once a second and inverter board red LED will blink a code or be on solid if no issue. See back of the refrigerator for a sticker with what the number of blinks means. My unit one blinking 1 time. So I measured the resistance of the compressor between windings (8.9 ohms between...
Read more
More
$47.95
- Compare At:
-
$57.54
- You Save:
-
$9.59
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$21.39
- Compare At:
-
$25.45
- You Save:
-
$4.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10446920
Dryer won't start when you press the button? A faulty push-to-start switch prevents the motor signal. Simple DIY fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Dryer would not run after we turned it on. Dana H. • Orlando , FL • September 01, 2017
Replaced start switch.
Read more
More
$64.70
- Compare At:
-
$76.35
- You Save:
-
$11.65
Genuine Ge part
By: Ge
Part Number: WE01X29738
The Door Latch is an OEM part for GE dryers. It functions to securely fasten the dryer door shut during drying cycles. The latch fastens the door closed using a tension-based locking mechanism that engages automatically when closing the door.
Causes of a bad door latch can include loose or worn parts from continuous use over time. The locking mechanism may become improperly aligned or miscalibrated, inhibiting the secure closure of the door.
Symptoms of a faulty door latch include:
- Inability to start cycles with the door ajar
- Excessive moisture escaping around the edges of the poorly sealed door during drying
- Loud banging sounds from an improperly closing door
- Door popping open unintentionally mid-cycle
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Latch on my ge dryer was broken and door would not stay shut Alan K. • Elk River , MN • February 03, 2026
I input the model number and description and found an immediate match from APP. I wasnt 100% sure on how to access the location once I received the part so I watched a couple video's on the site and they confirmed I was going in the right direction.
Read more
More
$17.58
- Compare At:
-
$20.74
- You Save:
-
$3.16
Genuine Frigidaire part
By: Frigidaire
Part Number: 316032411
Oven won't heat to correct temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 15-60 minutes with basic tools.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Oven thermostat was broken Johnny C. • Laurel , MS • February 08, 2016
Removed old thermostat and pulled old thermocouple fron oven. ran new thermocouple to oven and put in clip, tistalled new thermostat using 2 phillips head screws, done.
Read more
More
$84.66
- Compare At:
-
$101.59
- You Save:
-
$16.93
Genuine Ge part
By: Ge
Part Number: WD13X10003
If your dishwasher won't start or the door won't lock, the door latch assembly is likely failed. DIY-friendly repair takes about 30 minutes to replace.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
My ge performance plus dishwasher quit working the control panel would not light up and allow me to choose a cyle to run Jeff J. • Lex , KY • March 11, 2015
With the power to the dishwasher on, I removed the six or seven screws holding the door panel together. With the door separated, I manually moved the switch which should close when the dishwasher latch closes. This illuminated and activated the control panel telling me that the problem was in the door latch. I purchased a new latch from appliance parts pros and installed it. Very easy fix for a homeowner, taking thirty minutes.
Read more
More
$38.43
- Compare At:
-
$45.73
- You Save:
-
$7.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691581
The Door Switch Lever is an OEM part for Whirlpool dryers. It plays a vital role in ensuring the dryer only operates when the door is securely closed by engaging with the door switch to signal the door's status.
Causes of a bad door switch lever can include normal wear and tear from repeated use, physical damage from accidental impact, or deformation from heat and humidity inside the dryer. A faulty lever can prevent the dryer from starting or stopping correctly.
Symptoms of a bad door switch lever include:
- Dryer not starting
- Dryer stopping mid-cycle
- Door not latching properly
- The dryer continuing to run with the door open
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
The lever to the door switch broke. Valerie M. • Rochester , NH • April 02, 2014
First, I rooked on YouTube for a video on how to fix it. The video brought me to a very helpful video with a link to your website. We have had this dryer since we bought the house 10 years ago and the thought of buying something new, that wasn't made as well was a dreaded thought. I went on the website, entered the model number of my dryer and then a search link for a parts search. Not knowing the part number, I was able to find the exact thing I needed. It was amazing and so easy! Had...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 676413
Fix a detergent dispenser that won't open or close properly with this latch kit. Includes all components for secure closure. 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Ge part
By: Ge
Part Number: WD09X21321
Fix a cracked or broken dishwasher handle that won't open properly. Requires removing front panel with torx and hex screws. Video guide available.
Do-It-Yourself Stories from Customers like You
Dishwasher needed new handle and console cover. Steven S. • Wheaton , IL • October 26, 2020
Reviewed repair via youtube. Disconnected the dishwasher power and water. Removed dishwasher from under the cabinet. Removed and disassembled the door and then made the repair. The last step reinstalled the door and dishwasher.
Read more
More
$84.30
- Compare At:
-
$99.47
- You Save:
-
$15.17