165D5450p001 Parts

The Igniter Mounting Screw is an OEM replacement part for GE ovens and ranges. This screw secures the igniter to the burner assembly, ensuring it remains firmly in place for consistent and reliable ignition. Its precise fit and durable design help maintain the stability and functionality of the igniter.

Over time, mounting screws can become corroded, stripped, or lost during repairs or maintenance. A missing or damaged screw may result in a loose igniter, affecting the appliance's ability to ignite properly.

Symptoms of a bad or missing igniter mounting screw include:

• The igniter becoming loose or misaligned

• Difficulty securing the igniter during installation or repair
• The burner fails to ignite reliably or consistently
• Increased noise or movement of the igniter during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

ST10-16 X 7/16"

This replacement screw secures appliance components so panels, brackets, and assemblies stay tight and aligned. Replace stripped or missing hardware to eliminate rattles and keep your unit assembled safely and correctly.

• Fastens panels, brackets, or components to the appliance frame
• Restores a secure fit when the original screw is lost, stripped, or corroded
• Helps prevent vibration noise and movement during operation
• Supports proper alignment of trim and assemblies

• Disconnect power; for gas units, also shut off the gas supply
• Use the correct driver to avoid stripping the head; do not overtighten
• Inspect and address damaged mating threads, clips, or brackets before reinstalling
• Refer to your model's parts diagram to confirm location and quantity

This solid lower door gasket seals the bottom edge of the dishwasher door to help keep water inside the tub and reduce leaks during cycles. It restores the door's seal for reliable performance and quieter operation. What it does:

• Forms a watertight seal along the dishwasher's lower door edge to prevent leaks
• Helps maintain proper wash performance by keeping water inside the tub
• Reduces door rattling and noise caused by a worn or missing seal
• Compatible with units that use a one-piece solid lower door gasket design

• One solid lower door gasket

• Inspect door and mounting channel for debris or damage; clean before installing the new gasket
• Press the gasket into the door channel evenly, ensuring a flush seal along the entire edge
• Avoid using sharp tools that could nick or tear the gasket during installation
• Disconnect power to the appliance before performing any service to reduce shock risk

The fuel bowl gasket provide an airtight seal to the fuel bowl. This will ensure that air, along with dirt and debris, do not make their way into the fuel. Gaskets will wear out over time. They will start to crack and fall apart, and they will no longer be capable of providing you with the necessary seal for the fuel bowl. The repair is easy and should only take between half an hour and an hour. This is an OEM replacement fuel bowl gasket part that is made from high-quality, durable rubber. Each of the fuel bowl gaskets is sold individually. The gasket can work well with many different types of outdoor power equipment, including snowblowers, chipper-shredders, tillers, lawn tractors, mowers, and other small engines. The fuel bowl gasket is compatible with many brands, including MTD, Yard Machines, Yard-Man, Troy-Bilt, Huskee, Cub Cadet, and Mastercut.

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

This part is a replacement carburetor kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective carburetor kit in a variety of snow blower models. This kit includes parts necessary for replacing various components of the carburetor, including the sealing gaskets, needle, jet, float hinge pin, and float. The carburetor is essential in the running of the engine and will need to be replaced if any part is broken or faulty. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this carburetor kit, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this carburetor kit is suitable for use on several different models of snow blowers manufactured by MTD, Troy-Bilt, Yard Machines, and Husky. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement rocker arm stud. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective rocker arm stud on various types of outdoor small engine power equipment. This rocker arm stud works by securing the cylinder head. The rocker itself slides over the stud and is then held securely by the nut that locks it into place. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this rocker arm stud, the appropriate owner's manual and equipment diagrams should be referenced. This rocker arm stud is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with lawnmowers, blowers, and tillers that have been manufactured by MTD, Yard Machines, Cub Cadet, Bolens, Husky, and Troy-Bilt.

This flange bolt is a genuine MTD part. It is manufactured as a replacement part for several different types of machines, including lawnmowers, snowblowers, leaf blowers, log splitters, tillers, wood chippers, and other equipment.A flange bolt is a type of fastener that has a skirt that extends off of the head. There are many locations on these types of machines where a flange bolt is used. The bolts and other fasteners on small engine equipment are typically designed to last for the life of the equipment. However, they may become damaged or stripped during another repair and require replacement. It is a good idea to have extra bolts and other fasteners on hand whenever making repairs to this type of equipment.This flange bolt is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Columbia, Husky, MTD, Craftsman, Remington, Yard-Man, Yard Machines, Mastercut, Cub Cadet, Troy-Bilt, and several others.

This replacement part is a flange bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This flange bolt is small but an important part to many machines and appliances. Bolts are able to keep things and place and hold other parts secure so that the entire appliance is able to operate smoothly. A new flange bolt might be needed if the user notices that the current one is damaged or missing. This could mean that parts of the appliance are coming off or becoming loose overtime. This replacement should be fairly simple and should only require a screwdriver and possibly pliers if the previous bolt is lodged in the appliance. Be sure to reference the specific owner's manual before replacing this part. This bolt is sold as a single piece. This is a genuine OEM part and is sourced directly from the manufacturer.

This is a replacement nut for use with bolts found on many types of lawn and garden machines. The purpose of the nut is to help fasten various parts together along with the bolt. The nut is a fastener with a threaded hole. The threads on the bolt connect with the threaded hole and provide a secure connection. A nut could need to be replaced if the threads have become stripped and it no longer fastens properly with the bolt. It would also need to be replaced if it has become lost. Replacing the nuts tends to be a fast and easy job. However, it will often depend on the location of the nuts in the machine. This is a genuine OEM replacement nut that is sold individually. Owners may want to buy several at once to have them available. The nut can be used on lawn mowers, snowblowers, tillers, log splitters, wood chippers, leaf blowers, and other small engines. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.