Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Tx121a3w Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Appliance Light Bulb
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

  • Dimming or flickering light
  • Complete lack of illumination inside the appliance
  • Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out   Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

More
$17.76
Compare At:
$20.96
You Save:
$3.20

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Run Capacitor
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129

The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.

Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.

Symptoms of a bad Run Capacitor include:

  • The appliance does not start.
  • The motor shuts off shortly after starting.
  • The appliance is humming but not running.
  • Increased energy consumption.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Too warm
  • Clicking sound
  • Won't start
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You Both the freezer and refrigerator stopped cooling   Raymond O. • Kerrville , TX • April 11, 2015

I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how... Read more

More
$42.95
Compare At:
$50.68
You Save:
$7.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Condenser Fan Motor Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697

This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.  

Symptoms of a bad condenser fan motor kit include:

  • Gradual rise in interior freezer temperatures
  • Inability to maintain consistent cooling performance  
  • Loud buzzing or grinding noises coming from inside
  • Tripped breakers or failure to restart after service

Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.

This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.

This part fixes the following symptoms
  • Fridge runs too long
  • Noisy
  • Freezer section too warm
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Conderser motor went out   David W. • Durand , MI • April 03, 2014

After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been... Read more

More
$61.95
Compare At:
$73.72
You Save:
$11.77

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

  • The refrigerator fails to resume cooling after closing the door
  • The inside light fails to turn on when the door is opened
  • Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Do-It-Yourself Stories from Customers like You Fridge interior light kept going out   Phil D. • Phoenix , AZ • June 16, 2014

Replaced door switch - it took less than 5 minutes - works perfectly Read more

More
$29.30
Compare At:
$35.16
You Save:
$5.86

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ice Maker Control Module
Genuine Whirlpool part
By: Whirlpool
Part Number: W10190935

The Ice Maker Control Module is an OEM replacement part for Whirlpool refrigerators. It acts as the brain of the ice maker, controlling and regulating its various functions to ensure efficient and consistent ice production.

Symptoms of a bad ice maker control module include:

  • No ice production or intermittent ice production
  • Ice maker not cycling on or off correctly
  • Errors or error codes related to the ice maker on the refrigerator's display
  • Unusual noises or clicking sounds from the ice maker

Causes of a bad control module can range from electrical issues, such as power surges or voltage fluctuations, to physical damage or wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Ice maker not making ice
  • Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You Ice maker was freezing up and not dumping properly   Frank C. • Worcester , MA • March 04, 2016

SO I FIGURED THAT ALL THE MECHANICAL PARTS OF IT WERE FINE SO THE LOGICAL THING TO DO WAS TO REPLACE ELECTRICAL COMPONENTS WHICH CONSISTED OF THE THERMOSTAT {THE BRAIN} AND THE CONTROL MODULE WHICH I PURCHASED AT A VERY REASONABLE PRICE . I REASSEMBLED THE UNIT AND IT HAS BEEN WORKING LIKE NEW EVER SINCE. THANK YOU! Read more

More
$66.66
Compare At:
$113.89
You Save:
$47.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP10442411

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It monitors the temperature of the evaporator coils and triggers the defrost cycle when the coils get too cold, preventing frost buildup and ensuring efficient cooling.  It operates by closing the heater circuit to initiate the defrost cycle. It opens the circuit when the temperature rises above 55 degrees Fahrenheit. It then resumes operation when the temperature drops to 20 degrees Fahrenheit.

Causes of a bad defrost thermostat can include regular wear and tear, exposure to moisture, or electrical issues. Over time, the thermostat may lose accuracy or stop working altogether, leading to frost accumulation or inefficient cooling.

Symptoms of a bad defrost thermostat include:

  • Excessive frost buildup in the freezer
  • The refrigerator running continuously or not cooling properly
  • The defrost heater not activating
  • The refrigerator cycling on and off frequently

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Freezer not defrosting
  • Frost buildup
  • Fridge too warm
  • Fridge runs too long
See more...
Do-It-Yourself Stories from Customers like You Amana br18vw refrigerator wasn't staying cold   Adrian B. • Chicago , IL • February 08, 2015

I am not new to APP, fixed a tub belt on a Maytag dryer in the past. My frig started getting warm so I went onto to one of those "lists" sites and found a appliance repair place. The guys were great and came out right away. The tech said it was the cold control and $260 later my part was replaced, about 30 minutes. Great I thought until my frig started getting warm again. Those cold sensors on the beer bottles are a great indicator. Not wanting to spend another $260 I looked up on APP to see if... Read more

More
$29.95
Compare At:
$43.93
You Save:
$13.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working   Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348409

This factory screw secures appliance components. It restores a tight, reliable hold when the original hardware is stripped, missing, or corroded—helping prevent vibration and keeping panels and brackets properly aligned.

  • Provides threaded fastening for panels, brackets, covers, or internal components
  • Replaces worn, rusted, stripped, or missing hardware
  • Helps reduce vibration and rattling from loose parts
  • Restores proper alignment and a secure fit of attached parts
What's included: Includes 1 screw. Installation notes:
  • Disconnect power; turn off water supply before service
  • Note original screw location and retain any spacers or clips for reassembly
  • Start threads by hand to avoid cross-threading
  • Tighten snugly; do not overtighten to prevent stripping

Do-It-Yourself Stories from Customers like You Dishwasher would not start   Mark M. • Midlothian , VA • July 16, 2016

Maytag Dishwasher (about 5 years old). Some of the buttons had stopped functioning. Then the Start button began choosing whether or not to work. Eventually it would not start at all. Upon removing the control panel, the first thing I noticed was that the brackets that hold the two lower screws were broken. (So this was the reason that the door was so hard to open from the time it was new.) I trouble shot the thermal fuse, the door-latch switches, and inspected the control board trying to find... Read more

More
$7.95
Compare At:
$9.54
You Save:
$1.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw, 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

  • Fastens panels, brackets, covers, or internal parts to the chassis or frame
  • Helps maintain alignment and support, reducing rattle, vibration, or looseness
  • Replaces missing or damaged screws that have backed out, broken, or stripped
  • Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
  • Disconnect power; shut off water or gas supplies before servicing
  • Use the correct driver; start threads by hand to avoid cross-threading
  • Match length and thread to the original location; do not substitute with longer hardware
  • Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range   Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

More
$20.95
Compare At:
$24.93
You Save:
$3.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Door Gasket (Bisque)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12550109Q

This refrigerator door gasket seals the fresh food door to keep cold air in and moisture out. Replace a worn seal to restore temperature control, reduce condensation, and help the appliance run efficiently.

  • Creates an airtight seal between the door and cabinet
  • Helps maintain stable interior temperatures and reduce energy loss
  • Limits moisture buildup around the door opening
  • Replaces gaskets that are cracked, torn, shrunken, deformed, or not sealing
What's included: One refrigerator door gasket Installation notes:
  • Disconnect power before servicing
  • Allow the new gasket to relax; if needed, warm it in hot water to ease installation
  • Remove the old gasket carefully; seat the new gasket fully into the door channel, checking corners
  • Verify door alignment and test the seal by closing on a sheet of paper and adjusting as needed

This part fixes the following symptoms
  • Door sweating
  • Fridge runs too long
See more...
Do-It-Yourself Stories from Customers like You Ripped refrigerator door gasket   Reuven R. • Baltimore , MD • October 04, 2015

Loosened nuts around outer flange. Pulled out old gasket as shown in video. Prepared new gasket per included instructions. Installed new gasket again using techniques shown in video. Secured nuts then confirmed proper seal. This was not a difficult repair however patience and care is needed to ensure new gasket is properly seated without damage. Read more

More
$147.23
Compare At:
$173.73
You Save:
$26.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Crisper Cover Support Post
Genuine Whirlpool part
By: Whirlpool
Part Number: 10461901

Color: white. Measures about 1-1/2 inches wide by 7-1/2 inches high by 2 inches deep.

Do-It-Yourself Stories from Customers like You Part got mislaid or lost when appliance was moved to storage   Robert P. • Sumas , WA • June 26, 2015

Ordered replacement and had it in two business days. Compared the part to the area where it had to go and got it installed in seconds and it fitted perfectly. Read more

More
$29.68
Compare At:
$35.62
You Save:
$5.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (#8-18 X 5/8 In.)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98165

This replacement screw secures panels, brackets, and components inside appliances. Replacing a missing or stripped fastener restores a snug, rattle-free fit using the correct #8-18 thread and 5/8-inch length.

  • Fastens covers, trims, brackets, and internal parts to the cabinet/frame
  • Used wherever a #8-18 x 5/8 screw is specified
  • Replace if the original is missing, corroded, stripped, or will not tighten
  • Symptoms: loose or rattling panels, gaps, or hardware that backs out
What's included: 1 screw (#8-18 x 5/8 in.) Installation notes:
  • Disconnect power; shut off gas/water before servicing
  • Match thread and length; start by hand to avoid cross-threading
  • Use the correct driver bit and tighten snugly—do not overtighten
  • Inspect and replace damaged clips or tabs before securing

Do-It-Yourself Stories from Customers like You Missing parts   Barry E. • Long Beach , WA • July 20, 2019

Replace Read more

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Today Guaranteed
Add to Cart
Fan Grommet
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2264462

This rubber grommet cushions and secures a refrigerator fan motor, isolating vibration to help reduce noise and keep the fan properly aligned in its mount.

  • Provides a snug, vibration-dampening seat for the fan motor shaft or mounting stud
  • Helps prevent rattling, buzzing, or humming sounds from a loose fan mount
  • Maintains proper fan alignment to avoid blade contact with shrouds or brackets
  • Replaces aged, cracked, or compressed rubber that can lead to increased vibration
What's included: 1 fan grommet Install notes:
  • Disconnect power before service; wear cut-resistant gloves
  • Access the fan assembly (rear or evaporator section), support the motor, and remove the old grommet
  • Press the new grommet fully into the bracket or housing; transfer any spacers as originally configured
  • Reinstall the motor and verify the fan blade spins freely with no contact before restoring power

Do-It-Yourself Stories from Customers like You Loud fan noise from the freezer   Valerie G. • Sicklerville , NJ • October 27, 2014

Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more

More
$31.51
Compare At:
$37.18
You Save:
$5.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Cabinet Roller
Genuine Whirlpool part
By: Whirlpool
Part Number: WP10450603

The Cabinet Roller is an OEM part for Whirlpool refrigerators. It facilitates the smooth movement and positioning of the refrigerator cabinet, making it easier to adjust or relocate the appliance as needed. This roller is designed to support the weight of the refrigerator while allowing for effortless mobility.

Causes of a bad Cabinet Roller can include wear and tear over time, exposure to heavy loads, or damage due to rough handling or impact. These factors can lead to the roller becoming ineffective or breaking altogether, resulting in difficulty moving the refrigerator.

Symptoms of a bad Cabinet Roller include:

  • Difficulty moving or adjusting the refrigerator
  • Unusual noises when attempting to move the appliance
  • The refrigerator not sitting level or wobbling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The front bottom plastic roller of the refrigerator cracked and broke/crumbled under the weight of the fridge while rolling it out to clean behind it   Pedro N. • Eustis , FL • June 02, 2014

I contacted Appliance Parts Pros' wonderful (comprehensive and accurate) website, to search for the part. I located the part, so I ordered it and received it within 4 days, which is also an advantage of using Appliance Parts Pros. Upon arrival of the part, I had to grind off one end of the river that acts as a hub for the wheel to turn on. Then I slipped the the plastic wheel, that I received from Appliance Parts Pros, onto the rivet and welded it to the metal cage it fits onto. Finally I... Read more

More
$11.95
Compare At:
$14.34
You Save:
$2.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Bottom Hinge Pin (Refrigerator Door)
Genuine Whirlpool part
By: Whirlpool
Part Number: 67007018

This Bottom Hinge Pin supports the refrigerator door at the lower hinge, providing a smooth, stable pivot. Replace a worn or bent pin to restore proper door alignment, closing action, and gasket sealing.

  • Serves as the pivot point for the door on the bottom hinge bracket
  • Helps maintain alignment so the door gasket seals correctly
  • Wear/failure symptoms can include door sagging, wobble at the hinge, squeaks or grinding, and poor self-closing
  • Replacing a damaged pin can reduce hinge play and improve door operation
What's included: 1 bottom hinge pin Installation notes:
  • Disconnect power; turn off water supply if working near a dispenser line
  • Remove items from the door and support the door to prevent strain on hinges
  • Detach bottom hinge fasteners, lift door off, replace the pin, and reassemble
  • Adjust hinges as needed

Do-It-Yourself Stories from Customers like You In moving refrigerator from one house to the next a hinge part was lost   Ricardo L. • St. Louis , MO • September 17, 2018

Ordered new hinge piece and installed Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (Hex Washer Head)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489349

This hex washer-head screw secures panels, brackets, and other components inside your appliance. Replacing a worn, stripped, or missing screw restores a tight fit, reduces vibration and rattles, and helps keep assemblies properly aligned.

  • Fastens panels, brackets, covers, and internal hardware to the cabinet or frame
  • Helps prevent loosening, rattling, or misalignment during appliance operation
  • Replace if the head is rounded, threads are stripped, or the screw is missing
  • Useful after service when an original fastener is lost or damaged
What's included: 1 screw Install notes:
  • Disconnect power and shut off gas/water before starting
  • Use the correct nut driver or socket for the hex head to avoid rounding
  • Start threads by hand to prevent cross-threading; tighten snugly without overtightening

Do-It-Yourself Stories from Customers like You A refrigerator door would not seal it had been blown off in a wind storm   William H. • Sierra Vista , AZ • December 17, 2014

A friends family had left her refrigerator out on a porch while they were remodeling the house she was supposed to move into. A wind storm blew the refrigerator off the porch and tore the door off. It wasn't dented at all, but when her son pu the door back on, it wouldn't seal. She asked for some help fixing it. I ordered replacement parts for the upper and lower hinge. The parts arrived quickly. I unscrewed the top hinge which was slightly bent. Set the door on its side and replaced the bent... Read more

More
$7.95
Compare At:
$9.38
You Save:
$1.43

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store