Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Rubber door boot seal prevents water leaks between the washer drum and door. Replace if torn, cracked, or leaking during cycles. Confirm fit by model.
I noticed the rubber seal (bellow) was damaged near the bottom of the bellow. It looks like removing clothes from the machine had worn away and eventually ripped away some of the seal. This caused water to leak out the bottom of the door. I looked up the model number of my washer on the web and searched for the part number of the bellow. Once I found it I searched eBay, Amazon and a few other places for the part number and opted for Appliance Parts Pros. The part was reasonably priced and... Read more
Washer won't drain or pump keeps running? This drain pump circulates and removes water during wash cycles. Common DIY repair, typically 15-30 minutes.
The original pump was getting jammed intermittently, more and more often. I cleaned it out, but that didn't help the jamming. So I ordered a new pump. Have your new pump on hand and look at it to see how it attaches. The original pump, a different part number than the replacement, lasted about 7 years of almost everyday use, with multiple loads each day. My washer model Maytag MHW5500FW0 has the pump at the bottom back, in an awkward position. This took me about 2 hours due to the awkward... Read more
Replacement door hinge for front-load washers and dryers. Attaches door to cabinet for smooth opening and closing. Needed when hinge is cracked or worn.
I ordered the new hinge and the cap they said would be needed, took the door apart and installed new hinge. Only problem, wish they told me I needed 4 of the caps, for one hinge and each cap was 11.95 x 4...pretty spendy. Fortunately I was able to reuse 3 of my worn ones for now. Read more
Fix F03 E01 or F08 E01 error codes with a new water level pressure switch. Controls fill and drain cycles. Easy 5-minute DIY replacement for washers.
I contacted AppliancePartsPros and gave them my symptoms and failure codes and they were able to diagnose the problem and send the correct parts to resolve the issue. This is the 3rd or 4th time I've used their service since 2012 and they have been correct on each and every repair issue I've had. Many thanks for the professional advice and help! Read more
Hinge pin bushing for front-load washers. Provides a pivot point for the door hinge. Replace if worn, cracked, or causing the door to drop or sag.
Broken or cracked dispenser drawer causing detergent leaks? Replace your washer's detergent drawer. Easy 90-second install, no tools needed.
Found the parts on appliance parts pros and ordered them. It was amazing one arrived the next day and the other just the day after that it was so quick! There wasn't any real assembly just pulled the old drawer out and put in the new one! Read more
Fixes door lock error codes (F5E3), door won't latch, or continuous lock cycling. DIY-friendly repair takes 20-30 minutes with basic tools.
We watched a YouTube video on how to replace the door latch. Very simple to do. We had to remove the metal band holding the door gasket to be able to access the latch. After removing the band, we pushed aside the gasket and removed the screws to the latch and the connecting cables. To install the new part, we just reversed the process. We reconnected the cables, inserted the new door latch and screwed it in. The hardest part of the process was getting the metal band around the gasket. It... Read more
Secures the outer boot seal clamp for a watertight seal around your washer door. Replace if you notice leaking around the door during cycles.
Replaced all rubber and plastic hoses coming into and exiting the washer discharge pump. They where gummed up with mold and slime. WOW it stopped all odor from discharge into the utility sink. This model required that the whole front of the washing machine be removed which was very intimidating, but after watching the video from Appliance Parts Pros it was easy, I also replaced discharge pump and the bellows since I had it apart anyway and it was 5 years old. Thank you Appliance Parts Pros I... Read more
Secures the inner door boot seal to prevent leaks in front-load washers. Replace if damaged, corroded, or when seal won't stay in place. Verify fit.
Ordered and replaced the bellows. The video was a great help; but as others have mentioned, later models have small differences. Check your model number. I'll second everything said in the review dated Nov 10, 2018; including the part about getting an assistant to hold the outer retention ring in place while you are stretching the spring. Read more
Washer won't fill or water leaks? This water inlet valve assembly controls water flow during wash cycles. Common DIY repair, typically 30-45 minutes.
Replaced water inlet valve assembly Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Washer won't start or shows door lock error? The door strike secures the latch for safe operation. Easy 5-minute fix with just two screws—video available.
Removed and replaced the door switch. Best service I just watched their video on it and it was a snap ordering was no problem. Very easy got the switch and plunger when they said with no delays . Very good service I will come back if I need more parts with out hesitation thanks. Read more
Adjustable front leveling foot for washers. Supports and stabilizes the machine on uneven floors. Replace if cracked, worn, or missing threads.
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more
Fix detergent not dispensing or leaking dispenser issues. DIY-friendly repair with step-by-step video guide. Includes housing and all connections.
The soap dispenser had a broken water valve, and I had to replace it with the new one you sent me, and it works perfectly. Read more
Fix F24 or F-20 error codes with a new water temperature sensor. Located on the outer tub, this is a moderate DIY repair. Video guide available.
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since. Read more