Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't start or door won't lock? This door lock assembly secures the door during cycles. DIY-friendly repair, typically takes 15-30 minutes.
Disconnect existing part and connect new one. Disconnect involved removing back cover around lock and electrical connector. Also had to remove rubber gasket. Read more
If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.
Good idea to snap a few picture on iPhone or digital camera as you go along. Remove 16 torque screws from back metal panel Pull down small plastic panel (6 by 4 inches), front right by pressing down locking tab, and once off, remove torque screw in centre next to round plastic drain trap. Then insert flat screw driver around perimeter of front plastic panel (front bottom) to pry off the panel. You can also remove this panel from the back by pressing 3 plastic v-clips with your hand and... Read more
Washer won't spin or shows F:43/E:21 error? Worn motor brushes are the likely cause. This repair typically takes 15-30 minutes with basic tools.
Researched online. Tried the easiest fix by cleaning the pump filter drain area, which had some change in there, but that didn't work. So bought the carbon brushes for my husband to replace. This was supposed to be the problem 95% of the time and pretty inexpensive Took two hours of irritation and a little cursing, but together we managed the job after watching a YouTube video. Reset the error code and works great! Read more
Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.
Turned off the water. Used a locking wrench to take off the old hot water intake. Replaced it with this. Works perfectly. Read more
The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.
A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.
Symptoms of a bad fastening ring include:
Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
Removed old boot gasket and installed a new one. I had to look at youtube videos for help. Read more
Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.
The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.
Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.
Symptoms of a bad washer filter-fluff include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.
Bosch Axxis wasn't draining. Cleaned out filter and still didn't drain. There was also a whining noise when it was trying to drain. So I did some research and confirmed what I suspected. The drain pump had failed. Ordered a new pump and it arrived in two days. Replacement took a couple hours. Had to remove the back panel and front lower panel. Two hoses connected to the old pump had to be disconnected as did a power connection. Putting the new pump back in was just a matter of reconnecting... Read more
Fix a cracked door frame or broken door handle with this washer door and window assembly. Includes frame and glass. DIY repair in about 30 minutes.
After years of replacing the female electric latch switch that controlled the operation of the machine, I discovered that the window/door's handle's connection to its male latching hook had failed. The two were no longer interconnected. Also, the window/door's frame and hinge were materially "fatigued" meaning the hinge/body assembly was allowing the window/door to sag - causing the misaligned door/window to machine body electric latch switch to break when the window/door was closed. Gaining... Read more
This bearing set replaces the slide bearings in the dishwasher rack rails. It restores smooth, even rack movement and helps keep the rack aligned so loading and unloading is easier and the rack stays securely on the tracks. What it does:
Search one the internet on the model + issue, lead to detailed easy to follow instructions on how to repair. Read more
The Valve is an OEM replacement part for Bosch clothes washers. It regulates water intake, determining volumes for specific cycles. Balanced flow conserves resources without sacrificing clean performance.
Causes of a bad valve can include mineral deposits clogging internal pathways over time. Constant opening/closing stresses rubber seals and disrupts precision.
Symptoms of a bad valve include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Replaced. Part fit perfectly. Exact replacement. Read more
Connects washer door to front panel for smooth opening and tight seal. Replace if bent or worn to fix door alignment issues and prevent leaks. Confirm fit.
Simple fix on my Bosch front loader that only requires a small Torx bit and screwdriver/screw gun. I broke this on an early Friday morning, immediately ordered it and it was at my house Saturday afternoon (regular shipping). AppliancePartsPros has saved me a few times with their parts availability and quick shipping. Thanks Read more
Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.
Bought these when I attached the pedestal to the Vision dryer, which uses different feet. Read more
Fix a washer that leaks or fills when off with a new valve magnet coil. This electromagnetic solenoid controls water flow during wash cycles.
The Fastener Ring is an OEM part for Bosch washing machines. It helps securely mount the door gasket in place, sealing in moisture and preventing leaks. The fastener ring plays an important sealing role, firmly attaching the pliable door gasket that surrounds the washer door opening. This allows the gasket to function properly in preventing water from escaping during fill and wash cycles. Symptoms of a faulty fastener ring include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Flexible drain hose that routes water out of your washer during drain cycles. Replace if cracked, leaking, kinked, or disconnected from the pump.
Washer won't agitate or spin? Drive motor powers drum rotation for washing and spinning cycles. Restores proper agitation and water extraction.