Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.
Replaced the pump drain assembly Read more
Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.
My refrigerator is 13 yrs old and began to build up frost in the ice cube shoot and the water tube began to freeze up over night. The flapper door was not closing completely. I simply removed the control panel by pulling up and out on the bottom edge, the edge is only about 1/8 inch thick, so don't reach in to far. You should be able to feel a small division line between the control panel and the refrigerator. No screw driver was needed to expose the 4 mounting screws of the inner dispenser... Read more
Replace your rusted, cracked, or worn lower dishwasher rack. Holds plates, bowls, and pans securely during wash cycles. Includes rollers for easy gliding.
All I had to do was take the old rack out, open the box with the new rack and slide it in. It took less than 30 seconds. Plus the new rack was delivered less than 24 hours after I ordered it! That is great service. Read more
Dishwasher tub gasket creates a watertight seal between the tub and door. Replace if you notice water leaking or steam escaping. Confirm fit by model.
All parts arrived in one box - I purchased the tub gasket, lower door gasket and lower door seal. My existing parts were visibly pretty worn out, dishwasher is 12 years old (maybe should have just bought anew one?). Tub gasket was pretty easy, it took me a while to make sure it was even all the way around, after attest run and the subsequent drying heat it fits nicely. Lower door seal went as video, all good, my other one was destroyed from the heat cycles. Could not get the lower door seal... Read more
Dishwasher won't start or stops mid-cycle? This door interlock switch detects when the door is closed. DIY repair in about 5-10 minutes with a screwdriver.
I got on the site and shared my issue. It was determined my door switches were bad, as well as my actuator. I ordered the parts (which arrived in just 2 days!) and I fixed it myself in just under 10 minutes, for under $30.00. Thanks guys!!!! Read more
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes. Read more
Replace your cracked, broken, or worn dishwasher silverware basket. Sits in the lower rack to hold and separate utensils during wash cycles.
Purchased the new one through your company, delivered very fast, took the old one out and put the new one in. Don't have to be a brain surgeon to do this. But very thankful it was very reasonable, and delivery was very fast . Thank you again. Elizabeth Shewell Read more
Door won't open or handle feels loose? The handle actuator links your dishwasher handle to the latch. Easy DIY repair, typically under 1 hour with video.
Traps food particles during wash cycles to prevent recirculation and ensure spotless dishes. Replace if clogged or damaged. Confirm fit with your model.
My daughter and I went to Youtube and found an extremely well presented video on how to clean our exact make and model of dishwasher. We live in a newly rented house, new to us, not new. The dishwasher was an unholy nightmare of filth, clogged filters, calcium deposits coating and blocking in literal heaps, discovered when taken apart. The miracle really was that the dishwasher cleaned at all. We cleaned and scraped everything thoroughly, the fine filter and the sump filter as well but decided... Read more
Upper dishrack assembly for dishwashers. Holds dishes and glasses in the upper section. Replace if rusted, cracked, broken, or wheels are worn out.
Found parts at GE website. Shopped around and liked prices/reviews for appliancepartspro and made the purchase. 4 days late the parts arrived and I swapped them out. Minor assembly for removing water sprayer from old top rack and attaching to the new rack. Took 10 minutes tops and we were back up and running. Read more
Dishes coming out dirty or spotty? A clogged sump filter lets food particles recirculate. This filter traps debris for cleaner dishes. DIY install.
Dishwasher leaking from underneath? A cracked pump connector causes water pooling. Requires dishwasher removal; typically 1-hour repair once accessed.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
Center wash arm assembly for dishwashers. Mounts on the center rack area to spray water during wash cycles. Replace if holes are clogged or arm won't rotate.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Replaces a cracked, broken, or clogged lower spray arm in your dishwasher. Installs at the bottom of the tub. Needed when spray holes are blocked or damaged.
I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more
Prevents leaks by sealing the bottom of your dishwasher door. Replace if water leaks during cycles or rubber shows wear. Verify fit with your model number.
Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.
I pulled the DW out, pulled off the old blanket pieces, vacuumed up the millions of small parts, then put the new blanket on, I did use some packing tape to hold it in place. Easy! The challenge was moving the unit out, then back in, but that was simply time and a little effort. Read more