Model Serial Number Sticky Insert Parts

I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the... Read more

Reverse engineered. Read more

Ordered front panel and panel control. Also ordered name plate (did not need) front panel already has it. My husband and I had it switched out in approx 10 minutes. Took longer to gather proper tools than it did to do the repair. Looks awesome and original! Read more

Replacing the circulation pump and control panel were straight forward. Additionally, watching your videos on replacing the items were beneficial. Read more

Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So... Read more

Had my kitchen renovated and my contractor lost the access panel for my Whirlpool dishwasher so I had to find a replacement. Found what I was looking for at AppliancePartsPros.com, chatted with a sales customer service rep to make sure it was the correct part. Ordered it, paid for standard shipping, which said 2-3 days, it arrived at my house the next day! The part was also a genuine Whirlpool replacement part, not a generic part that "should" fit, needless to say, it fit perfectly and... Read more

Pretty easy fix with replacement part from AppliancePartsPros -- but there's a catch: The eight control buttons, not the on/off button, all look alike, but they need to be installed in a certain order for them to work once you install the panel. No instructions for this and the repair video (by the tech Simon) does NOT make this clear. It took a lot of time and repeated installations to figure this out. The buttons, which can be from the old part, need to be installed according to the letters... Read more

After 8 years of yanking to open our Bosch dishwasher (SHE45M06UC/50 model #) the plastic front panel cover started to break off (one of the tabs on the left side broke off). The shipping was super-fast, so got the part within 2 business days. Just need to remove the lower Torx screws (3 on each side) which hold the lower front panel to the dishwasher to get access to the screws holding on the control panel, swap the buttons and silver handle, and replace. Read more

Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more

The How-to videos on YouTube from appliance parts pros are very easy to follow. Read more

Easy job, I screwed the parts to the dishwasher Read more

Removed torx screws attaching stainless liner to outer stainless door. Lift off inner door and carefully separate the electronic components from where they snap into the control panel. Relocate electronic components to the new control panel. Reattach the inner liner with the torx screws. It is helpful to have an extra set of hands to hold the control panel while making the electronics swap to avoid pulling on the wiring harness. For door balance kit I just followed the video, straight forward. Read more

This piece fails due to poor design as the weak point of the part you grab to open the dishwasher door. This defect has been reported by a number of owners as a common failure point on this model dishwasher. This is a $90 piece of plastic and yes, it does the job of restoring the DW to fully functional. But due to the inherent design, this part is subject to failing again unless you remember to open the DW a bit gently, and not yank it open You'll need a T20 Torx screw driver and a flathead... Read more

Replaced with new kickplate panel. Didn't exactly match our unit but was the right length & lined up correctly enough to allow me to zip tie it to the frame properly. Read more

The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons. I pulled the stainless panel off the front, then... Read more

I was visiting my family in Indiana and it was brought to my attention the dishwasher control panel was broken. I went online search for the part verified part online correct with customer service representative. Showed my sister-in-law how to replace the part as I was departing next day. The part arrived the following day she installed the part and now everyone is smiling??. Thanks Read more