Rb78wc1ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (372)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bake Element

4.9 (253)

By: Ge

Part Number: WB30X46987

The Bake Element is an OEM replacement part for GE electric ranges. It is the internal heating element located at the bottom of the oven cavity that provides heat for baking and convection cooking functions. This heating element measures 17 1/2 x 18 1/2 inches.

Causes of a bad bake element include failure due to normal wear and tear over extended use. Exposure to spills or splatters inside the oven can potentially damage heating coils or insulators.

Symptoms of a bad bake element are:

Inconsistent or uneven baking temperatures
Element does not heat up or turns red but puts out no heat
Buzzing/humming sounds from beneath oven cavity
Failure of oven to operate or preheat as expected

This OEM part is also compatible with ranges sold under the Hotpoint, RCA and some Kenmore brands.

Do-It-Yourself Stories from Customers like You Ge cafe gas range electric oven would not heat over @ 200f in bake mode John T. • Charlotte , NC • December 26, 2025

Visually inspected bottom heating element and found that it had failed. There was a @2" gap of missing element and burned debris below the damaged area. This was discovered 3 days before Christmas. 1. Open under oven storage drawer and look on the left inside frame frame for Model ID and Serial No. 2. Search on AppliancePartsPro.com for bottom heating element. 3. Ordered part on Sunday evening before Wednedsay Christmas - with expedited next day delivery. 4. Received order confirmation and... Read more

$92.95

Compare At:: $110.61
You Save:: $17.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Control Board

4.9 (194)

By: Ge

Part Number: WB27X45466

The Control Oven TO9 is an OEM part for GE ranges. This part manages the oven's various functions, including temperature regulation, cooking modes, and timer settings. It serves as the central interface for the user to control the oven's operations, ensuring precise and reliable cooking performance.

Causes of a bad control module can include electrical surges, general wear and tear, or physical damage from impacts or spills.

Symptoms of a bad control oven module include:

Unresponsive or malfunctioning buttons and dials
Incorrect temperature readings or inconsistent heating
Display not functioning properly
Oven not turning on or shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven control board failed to work after oven light shorted Glenn S. • Fairfax , VA • October 28, 2014

Replaced control board myself. Easy. Read more

$133.21

Compare At:: $158.52
You Save:: $25.31

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Cerama Bryte Cooktop Cleaner

4.9 (306)

By: Ge

Part Number: PM10X310

Cerama Bryte Cooktop Cleaner is a special cleaner designed specifically for ceramic glass and smooth-top cooking surfaces. It easily removes cooked-on foods, spills, or grease while leaving your cooktop looking like new. This product contains no abrasives or harsh chemicals, so it won’t scratch or damage your delicate cooktop surface.

To use the cleaner effectively, all you need to do is spray it onto the surface and then scrub it with a clean damp cloth. Use circular motions for best results. The product can also be used to remove baked-on foods from grates and drip pans on your stovetop. For tougher stains, let the cleaner sit for a few minutes before wiping it away.

Do-It-Yourself Stories from Customers like You Cooktop on my kitchenaid slide in range shattered word to wise don't place your pot tops face don on the stove the top formed a vacuum with the top and as the top cooled the vacuum increased to th Marc L. • North Branford , CT • May 16, 2016

VERY simple fix- you do not even have to pull the range out.. I ordered a new cooktop from Appliance parts Pros. The customer sales rep Alphonso was great and walked me through the general process. I could find no explicit instructions for the repair but I muddled my way through. The fix is simple on Kitchenaid/Whirpool slide in ranges. 1. Open the oven door and remove the two phillips head screws directly below the control panel that hold the panel down.2. Lift the control panel upward and... Read more

$14.78

Compare At:: $17.44
You Save:: $2.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Bake Element

4.9 (319)

By: Ge

Part Number: WB44K5012

The Oven Bake Element is an OEM part for GE ovens. This element is located at the bottom of the oven and is primarily responsible for providing the heat necessary for baking. When the oven is turned on, electricity flows through the element, causing it to heat up and glow red-hot. This bake element has ¼” push-on wire terminals. If you are unable to use your old wire connectors, order TJMA02875-1.

Symptoms of a failing oven bake element include:

Oven not heating up properly or taking longer to heat
Uneven cooking or baking
Element not glowing or only partially glowing during operation
Visible signs of blistering, cracks, or holes on the element

Causes of oven bake element failure typically include general wear and tear from regular use, exposure to high temperatures which can weaken the element over time, or electrical issues such as short circuits.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Oven is too hot
Won't start

Do-It-Yourself Stories from Customers like You Element burn into Richard D. • Summerville , GA • April 02, 2014

Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro Read more

$61.64

Compare At:: $73.97
You Save:: $12.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Range Surface Burner Control Switch

4.9 (76)

By: Ge

Part Number: WB24T10029

The Range Surface Burner Control Switch is an OEM part for GE ranges. This switch manages the temperature of the surface burners on your range, providing the ability to adjust the heat level. Whether you're simmering sauces or boiling water, the control switch ensures precise temperature management, enhancing your cooking experience.

The causes of a faulty burner control switch often include prolonged use leading to wear on the electrical contacts, exposure to moisture causing short circuits, or physical damage from impact or excessive force when turning the knob.

Symptoms of a bad surface burner control switch:

The burner not turning on or off
Inability to adjust the heat level, with the burner staying at one temperature regardless of the knob setting.
Intermittent burner function

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Large dual burner Frederick E. • Athens , AL • September 19, 2014

Stove is a GE Adora Model JBP63HH2bb. It took me forever to figure out how the burner was attached to the rails. My glass top was different than any instructions found on the internet for changing out a burner. The burners on this one are held to the bottom of the glass cook top by two rails that cross the bottom of the burner assemblies. In order to get too the burners you must remove 4 Phillips screws to lower the rails and burners from the cooktop. I suggest two people do this because... Read more

$37.26

Compare At:: $45.52
You Save:: $8.26

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Sensor Assembly

4.8 (60)

By: Ge

Part Number: WB21X5301

The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly.

Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.

Symptoms of a bad Oven Sensor Assembly include:

The oven temperature is inconsistent with the setting
Food is not cooking evenly or as expected
The oven fails to heat to the set temperature
Error codes appearing on the oven display related to temperature regulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014

Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly. Read more

$123.00

Compare At:: $179.02
You Save:: $56.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Infinite Heat Switch Kit

4.8 (55)

By: Ge

Part Number: WB21X36771

The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.

Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.

Symptoms of a bad Infinite Heat Switch include:

Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015

I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking as it cycles - it should be replaced. I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of... Read more

$49.68

Compare At:: $59.62
You Save:: $9.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Bake Element

4.9 (78)

By: Ge

Part Number: WB44X10009

The Bake Element is an OEM replacement part for GE wall ovens and ranges. It produces the heat necessary for baking, broiling, and warming functions. Situated at the top or bottom of the oven cavity, the bake element converts electrical current into thermal energy for perfect cooking results.

Causes of a bake element issue can be normal wear and tear over time. The filament may also develop cracks or breaks that prevent it from functioning properly.

Symptoms of a bad bake element include:

Inadequate or uneven heating inside the oven
Browning/burning of foods occurs too quickly
Element does not glow red when set to bake
Oven fails to reach desired temperature

This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking

Do-It-Yourself Stories from Customers like You The baking element quit working....in fact it BURNT in half!!!! My stove is 15 years old and used everyday. Marsh C. • Waterloo , IN • March 21, 2014

Checking for part replacement.....found your website.....I thought I had the right part, but called the tech/order line. Spoke to a very knowledgable tech, which she checked the stove serial # vs the part I thought I could use. The Tech advised that it WAS NOT and related the findings. I agreed after a short discussion and ordered the new element. The order was placed on Monday afternoon, on TUESDAY the FEDX truck pulled in with the replacement element!!!!!!! I watched the video offered on... Read more

$67.95

Compare At:: $81.54
You Save:: $13.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Rack

5.0 (38)

By: Ge

Part Number: WB48T10095

The Oven Rack is an OEM part for GE ranges, providing a sturdy and reliable platform for baking and roasting a variety of dishes. Its design allows for easy placement and removal from the oven, offering flexibility in cooking heights and accommodating different sizes of bakeware.

Causes of a bad Oven Rack can range from excessive weight being placed on the rack, exposure to high moisture levels leading to rust, or simply the age-related wear and tear that comes from regular use.

Symptoms of a bad Oven Rack include:

Warping or bending, which can prevent the rack from sitting level in the oven and affect cooking performance.
Rust or corrosion, which can weaken the rack's structure and potentially contaminate food.
Difficulty sliding the rack in and out, which may indicate damage or misalignment.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014

Orded rack by stove model number. fit perfect Read more

$64.35

Compare At:: $76.58
You Save:: $12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Rack

5.0 (3)

By: Ge

Part Number: WB48X20249

The Oven Rack is an OEM part for GE ovens. It provides a stable and reliable surface for placing baking sheets, pans, and dishes inside the oven for cooking or baking.

Causes of a faulty oven rack can include wear and tear over time, bending or warping due to heavy items or improper handling, or damage from cleaning or harsh chemicals. A damaged or malfunctioning oven rack can lead to uneven cooking, unstable support for cookware, or difficulty in removing or inserting the rack into the oven.

Symptoms of a bad oven rack may include:

Uneven cooking or baking results
Difficulty sliding the rack in or out of the oven
Bent or warped rack structure
Instability when placing cookware on the rack

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Missing parts Steven S. • Yonkers , NY • May 27, 2017

I called AppliancePartsPros.com gave them my model number and the representative was very knowledgeable, and ordered the right parts for me. I received my parts within a couple of days. Read more

$73.61

Compare At:: $88.33
You Save:: $14.72

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Broil Element

4.8 (29)

By: Ge

Part Number: WB30X46986

The Oven Broil Element is an OEM replacement part for GE ovens. It is located in the upper portion of the oven cavity and is responsible for generating intense heat for broiling foods. This element provides even heat distribution, ensuring proper cooking and browning of food during the broil cycle.

Over time, broil elements can wear out or fail due to frequent use, high temperatures, or electrical issues. A damaged element will affect the oven's ability to broil properly.

Symptoms of a bad broil element include:

The broil function not working or producing insufficient heat
Uneven browning or cooking of food during broiling
Visible damage, such as breaks or blisters on the element
Sparking or tripping of the circuit breaker when the broil setting is used

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Broiler element was not working Ricky S. • Bethlehem , GA • December 18, 2014

Ordered a new one. took out 4 screws. Pulled the 2 electrical connectors loose and removed. Replaced the same way. FIRST thing to do is to turn off the power. Read more

$79.95

Compare At:: $95.14
You Save:: $15.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Lamp Holder

5.0 (34)

By: Ge

Part Number: WB08T10002

The Oven Lamp Holder is an OEM part for GE ovens. This component securely holds the oven light bulb in place, ensuring proper illumination inside the oven cavity for better visibility during cooking and baking.

Causes of a bad lamp holder can include repeated exposure to high temperatures, physical damage, or electrical issues. A malfunctioning lamp holder can lead to the oven light not functioning correctly or at all.

Symptoms of a bad oven lamp holder include:

The oven light not turning on
Flickering or intermittent operation of the light
Visible damage or corrosion to the lamp holder
The light bulb not staying securely in place

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Faulty light housing in oven Jerry S. • Gulfport , MS • October 23, 2015

Ordered replacement unit. It arrived as scheduled,even came with light bulb to my surprise. Turned off breaker, Removed two hex nuts, unplugged electrical connectors plugged in to new unit reinstalled hex nuts. Turned on breakers. Wife is happy. Read more

$21.25

Compare At:: $31.51
You Save:: $10.26

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Support Bracket

4.9 (33)

By: Ge

Part Number: WB2X9719

The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.

Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.

Symptoms of a bad Support Bracket include:

The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
Unstable or loose broiling element, leading to uneven cooking or broiling.
Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$8.69

Compare At:: $10.43
You Save:: $1.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Oven Light Lens

4.9 (42)

By: Ge

Part Number: WB36X192

The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.

Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.

Symptoms of a bad Oven Light Lens include:

Diminished light output, making it hard to see inside the oven
Cracks or damage to the lens itself
Discoloration or cloudiness that cannot be cleaned off
The lens becoming loose or falling off

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Handle Door (Blk)

5.0 (10)

By: Ge

Part Number: WB15X10047

This Door Handle is an OEM part for GE ranges. It is the ergonomic component located externally on oven doors that allows for safe, comfortable opening and closing during cooking cycles. The handle is black in color and measures about 30 and 1/4 inches.

Symptoms of a bad range door handle can include:

Looseness, wobbling, or detachment from the door assembly
Cracked or broken plastic rendering the handle unusable
Peeling, cracking, or discoloration of surface finishes from heat
Difficulty grasping the handle to access oven cavities

Expected causes are repeated heat exposure and grasping stresses over time that degrade mounting points and coating integrity.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Oven door handle broken Sam M. • Seymour , TN • July 18, 2015

Removed 2 outer screws that held on handle and 4 inner screws which held on handle to outer panel. Installed new handle with 4 screws and installed outer 2 screws with spacers which were in door. Read more

$89.51

Compare At:: $107.41
You Save:: $17.90

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Rb78wc1ww Parts

Appliance Light Bulb

Bake Element

Oven Control Board

Cerama Bryte Cooktop Cleaner

Oven Bake Element

Range Surface Burner Control Switch

Oven Sensor Assembly

Infinite Heat Switch Kit

Bake Element

Oven Rack

Oven Rack

Oven Broil Element

Oven Lamp Holder

Support Bracket

Oven Light Lens

Handle Door (Blk)