Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't start or door won't lock? This door lock assembly secures the door during cycles. DIY-friendly repair, typically takes 15-30 minutes.
Disconnect existing part and connect new one. Disconnect involved removing back cover around lock and electrical connector. Also had to remove rubber gasket. Read more
If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.
Good idea to snap a few picture on iPhone or digital camera as you go along. Remove 16 torque screws from back metal panel Pull down small plastic panel (6 by 4 inches), front right by pressing down locking tab, and once off, remove torque screw in centre next to round plastic drain trap. Then insert flat screw driver around perimeter of front plastic panel (front bottom) to pry off the panel. You can also remove this panel from the back by pressing 3 plastic v-clips with your hand and... Read more
Washer won't spin or shows F:43/E:21 error? Worn motor brushes are the likely cause. This repair typically takes 15-30 minutes with basic tools.
Researched online. Tried the easiest fix by cleaning the pump filter drain area, which had some change in there, but that didn't work. So bought the carbon brushes for my husband to replace. This was supposed to be the problem 95% of the time and pretty inexpensive Took two hours of irritation and a little cursing, but together we managed the job after watching a YouTube video. Reset the error code and works great! Read more
Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.
Change the hot water hose. Read more
Secures the boot seal to your washer drum for a watertight connection. Replace if worn, damaged, or leaking occurs. Verify fit with your model number.
Removed old boot gasket and installed a new one. I had to look at youtube videos for help. Read more
Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.
Fix a cracked door frame or broken door handle with this washer door and window assembly. Includes frame and glass. DIY repair in about 30 minutes.
After years of replacing the female electric latch switch that controlled the operation of the machine, I discovered that the window/door's handle's connection to its male latching hook had failed. The two were no longer interconnected. Also, the window/door's frame and hinge were materially "fatigued" meaning the hinge/body assembly was allowing the window/door to sag - causing the misaligned door/window to machine body electric latch switch to break when the window/door was closed. Gaining... Read more
Captures lint and debris during wash cycles to prevent drain clogs. Replace if you notice slow drainage or residue buildup. Confirm fit with your model.
Bosch Axxis wasn't draining. Cleaned out filter and still didn't drain. There was also a whining noise when it was trying to drain. So I did some research and confirmed what I suspected. The drain pump had failed. Ordered a new pump and it arrived in two days. Replacement took a couple hours. Had to remove the back panel and front lower panel. Two hoses connected to the old pump had to be disconnected as did a power connection. Putting the new pump back in was just a matter of reconnecting... Read more
Replaces worn drum bearings that cause loud grinding or rumbling during spin cycles. Restores smooth, quiet operation. Verify fit with your model.
Search one the internet on the model + issue, lead to detailed easy to follow instructions on how to repair. Read more
Fix fabric softener not dispensing or weak water flow issues. This washer water inlet valve controls water intake for all wash cycles. DIY-friendly repair.
Replaced. Part fit perfectly. Exact replacement. Read more
Connects washer door to front panel for smooth opening and tight seal. Replace if bent or worn to fix door alignment issues and prevent leaks. Confirm fit.
Simple fix on my Bosch front loader that only requires a small Torx bit and screwdriver/screw gun. I broke this on an early Friday morning, immediately ordered it and it was at my house Saturday afternoon (regular shipping). AppliancePartsPros has saved me a few times with their parts availability and quick shipping. Thanks Read more
Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.
Was the door latch, easy to replace. I really recommend the appliancepartspro.com,the delivery was so fast 1 day. Read more
Fix a washer that leaks or fills when off with a new valve magnet coil. This electromagnetic solenoid controls water flow during wash cycles.
Replacement door handle for washer. Restores secure grip and original appearance. Ideal when existing handle is cracked, broken, or worn out.
Plastic bushing that sits between the washer door hinge and pivot point. Replace when worn, cracked, or causing loose door alignment and noisy operation.
Secures the door gasket to prevent leaks in your washer. Replace if the gasket is loose or water leaks during cycles. Confirm fit with your model.