Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't fill or won't stop filling? This water inlet valve controls water flow into the tub. DIY-friendly repair, typically takes 10-15 minutes.
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and... Read more
Fix washer won't agitate or makes grinding noise. This pulsator assembly restores proper wash action. Moderately challenging DIY repair with video guide.
We took the washer apart. and used the online videos (very helpful)! Used the diagram to figure out what to order. Parts came quickly and were packaged well. We put the new pulsator assembly and housing assembly in. Put all the rest of the parts back together and everything is working great! We really were grateful for the help ; ) Read more
Fix LE error codes and spinning problems with this washer rotor position sensor. Resolves machines that won't spin or make loud noises. Easy 5-10 minute fix.
I watched the Appliance Parts Pro video and saw that it was a job that I could easily do. I ordered the Rotor Position sensor switch for about $21 on a Monday and it was delivered by UPS on Wednesday. The process was straight forward: 1) remove the back cover from the washing machine (4 screws), 2) remove the main bolt holding the magnetic drum on the motor; 3) remove the 6 bolts holding the coil on the motor; 4) remove the ground screw and wire harness clamp screw; 5) take the old sensor... Read more
Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.
Fix a washer that won't fill with water or leaks into the tub when off. This inlet valve assembly controls water flow during wash cycles. DIY repair.
Replaced the inlet valve assembly. Read more
Agitator plate keeps coming loose or falls off? This washer pulsator cap secures the agitator assembly to prevent movement. Easy 5-minute DIY repair.
We had a repair man come and tell us the needed repair at the cost of 70.00 I ordered the parts and saved money. Read more
This drain hose directs used water from your washer to the household drain. Replace if cracked, split, leaking, or chewed through by rodents.
My granddaughter removed the old hose and installed the new hose I had ordered. Read more
Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.
Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!! Read more
Secures the pulsator assembly to the wash plate in top-load washers. Replace if screw is stripped, sheared off, loosened, or missing during service.
Replaced with a new screw and everything works fine. A very simple job that only took 15 minutes. Read more
Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.
Replaced it with the part I ordered from you guys. I had originally had LG come and check it out but they quoted me a price 250 plus tax. I said no way this little piece can cost 1/4 of the whole washing machine. So after finding your price, I you-tubed on how to replace it and I did in 20 min. Thanks youtube and thanks to you guys for such a great price on this switch assembly Read more
Suspension rod kit for washers. Supports the drum and reduces vibration during wash and spin cycles. Replace when rods are broken, worn, or damaged.
One of the suspension rods was not working so I replaced the bad one and the other three . Tub has now leveled out and is spinning properly without making the noise. Have not needed to replace the pump but will do so if necessary. Thanks to Appliance Parts Pro for their prompt service and quality products. Read more
Fix a washer that won't agitate or spin with this motor coupling. Connects the drive motor to the drum for proper spin cycle operation. DIY repair.
Fix E6 error codes and grinding noises with a new washer clutch motor. Simple DIY repair—just 2 screws on the bottom. Takes 30 minutes or less.
When I looked up LG washer E6 code on the web I saw the tip from LG: unplug the washer and call for service. To me that's a challenge. I saw the AppliancePartsPros.com story on Google, read it and decided to try the solution that worked for other people. A clutch shifter motor that was around $20. I checked a few local appliance parts stores and no one carried the part I needed in stock (even though their websites said available for pickup). I then ordered the part through AppliancePartsPros on... Read more
Secures hose connections in your washer to prevent leaks. Replace if you notice water leaking or loose hose fittings. Verify fit with your model number.
If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it. After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.) Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with... Read more
Fix squealing or grinding noises during spin cycles with this washer motor rotor assembly. Works with the stator to rotate the drum. Video guide available.
Ordered new clutch, rotor and drum sensor assembly. If your clutch bearings go, make sure you check rotor, stator and sensor for damage. Read more
Suspension rod assembly for washers. Installs to support the drum and absorb vibrations. Replace if worn, damaged, or causing balance issues during spin.