Parts for Maytag MRT118FFFE04: Shelf Parts

This refrigerator crisper pan replaces a cracked or missing produce drawer. It restores smooth sliding and dependable storage for fruits and vegetables, keeping items organized and contained in the fresh food compartment.

• Provides a dedicated bin for produce in the fresh food section
• Slides on the crisper rails beneath the crisper cover/shelf
• Helps contain leaks and prevent items from falling into the compartment
• Replaces a drawer that is cracked, chipped, warped, jammed, or missing

• Fully open the refrigerator door and remove items from the old drawer
• Pull the drawer to the stop, lift the front, then angle up and out to remove
• Inspect/clean the rails and underside of the crisper cover before installation
• Align the new pan with the tracks and slide in until it is fully seated; do not force

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

• Fastens panels, brackets, and internal components in the appliance cabinet
• Helps maintain proper alignment and reduce vibration or rattling noises
• Restores a tight fit where original hardware is missing, damaged, or stripped
• Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened

• Disconnect power; for gas models, also shut off the gas supply
• Replace one fastener at a time to preserve alignment and match to the original hardware
• Use the correct driver; start threads by hand to avoid cross-threading
• Do not overtighten into sheet metal

This tempered glass shelf replaces a broken or missing refrigerator shelf to restore storage space and keep items organized. It offers a flat, easy-to-clean surface that resists spills and supports food containers. What it does:

• Provides stable storage for groceries, beverages, and containers inside the refrigerator
• Helps contain spills and makes cleaning quick and simple
• Restores proper spacing and organization when a shelf is cracked or missing
• Fits into existing shelf rails or supports to sit securely in place

• One tempered glass shelf

• Handle carefully; tempered glass can break if dropped or struck
• Remove all food and loose items from the shelf area before installing
• Slide the shelf into the existing rails or supports until it seats fully and evenly
• If the shelf does not seat properly, stop and inspect rails or supports for obstruction or damage

This refrigerator glass shelf replaces a cracked or missing shelf, restoring a flat, sturdy surface for storing food and containers. It fits into the original supports to help keep items level and organized. What it does:

• Provides a solid, level surface for food storage inside the refrigerator
• Replaces broken, cracked, or missing shelf glass
• Restores proper spacing and organization between shelves
• Common signs of failure: visible cracks or shattering, instability, items tipping, reduced usable space

• 1 glass shelf

• Remove food from the area before servicing; work on a clean, stable surface
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Align with the existing rails or frame and slide in until fully seated
• Do not force into place; confirm orientation matches the original shelf

Replace a cracked or missing deli bin with this refrigerator meat pan. It's the slide-out drawer in the fresh food compartment that organizes meats and cheeses and restores smooth operation so items stay contained and easy to access.

• Provides a dedicated storage area for deli items and snacks in the fresh food section
• Fits the drawer rails to slide in/out smoothly and stay on track
• Helps contain small spills and keep items from getting pushed off shelves
• Common symptoms: cracked/chipped bin, broken tabs, drawer won't slide or stay in tracks, or the original is missing

• Remove items from the drawer; take out the glass cover or shelf above if your model uses one
• Slide the old pan straight out; align the new pan with both rails and push in until fully seated
• Do not force—verify the cover/shelf is properly seated before reloading
• Disconnect power if removing shelves or working near interior lighting for safety

The Refrigerator Drawer Track is an OEM part for Whirlpool refrigerators. It provides a stable guide for the refrigerator drawers, ensuring they slide in and out smoothly for easy access to stored items.

Causes of a bad drawer track can include normal wear and tear from frequent use, buildup of dirt and debris, or physical damage from overloading the drawers or accidental impact. When the track becomes worn or damaged, it can impede the drawer's functionality.

Symptoms of a bad drawer track include:

• Difficulty opening or closing the refrigerator drawers
• Drawers getting stuck or not sliding smoothly
• Misalignment or falling off the tracks
• Unusual noises when operating the drawers

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Axle is an OEM part for Whirlpool refrigerators. It is the mechanism that supports and enables smooth extension of shelves and drawers on sliding tracks.

Causes of a bad slide axle can include normal wear to plastic bushings from constant shelf movement, or damage from sharp or heavy items that cause stress and premature failure.

Symptoms of a faulty slide axle include:

• Shelves or drawers that do not fully extend or retract
• Resistance felt while pulling shelves out
• Squeaking or grinding noises coming from sliding areas
• Shelves that do not stay securely in place once extended

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a replacement refrigerator glass shelf that restores safe, level storage and keeps food organized. Tempered glass provides a solid, easy-to-clean surface that fits into existing shelf supports. What it does:

• Replaces a cracked, chipped, or broken fridge shelf so items sit level and are supported
• Prevents liquids and crumbs from falling to lower compartments with an easy-to-wipe surface
• Restores usable storage space when an original shelf is damaged or missing
• Works with existing shelf tracks or support pegs to slide into place

• Turn off appliance lights and remove food from the area before replacing the shelf
• Handle with care and wear cut-resistant gloves; tempered glass can still break if dropped
• Align shelf with support rails or pegs and slide in gently—do not force

This track guides and supports a drawer so it opens and closes smoothly, restoring proper alignment and preventing sticking or the drawer from falling off its slide. Use when the drawer binds, drops, or moves unevenly. What it does:

• Guides the drawer along its intended path for smooth opening and closing
• Supports and aligns the drawer to prevent binding, catching, or sagging
• Restores even movement when a drawer comes off its slide or won't glide properly
• Helps maintain secure drawer positioning under normal loading

• Disconnect power to the appliance (when applicable) and remove all contents from the drawer before servicing
• Remove the drawer to access the old track; keep original screws/fasteners and note orientation for reinstallation
• Align the replacement track with the mounting points and secure with the original hardware; avoid overtightening
• Test drawer movement and adjust alignment as needed

This left-side bottom crisper track supports and guides the refrigerator's crisper drawer. Replacing a worn or broken track restores smooth sliding and proper alignment so the bin opens, closes, and seats correctly.

• Supports the crisper drawer on the cabinet's left bottom side
• Provides a smooth slide path for consistent opening and closing
• Helps keep the bin level so it seats and seals properly
• Common symptoms: drawer sticks, sags, falls out, won't close fully, or the track shows cracks/broken tabs

• Disconnect power and remove food from the affected drawer area before servicing
• Remove the crisper drawer and any glass shelf above it
• Detach the old track (remove screws or release tabs) and retain hardware for reuse
• Position and secure the new track, then reinstall the shelf and drawer; test for smooth operation
• Orientation note: "Left" is determined when facing the front of the refrigerator

The Refrigerator Track is an OEM part for Whirlpool refrigerators. It supports and guides the movement of refrigerator drawers or shelves, ensuring they slide in and out smoothly. The track measures approximately 11 inches in length.

Causes of a bad track can include wear and tear from frequent use, damage from overloading the drawers or shelves, or breakage due to accidental impact. Over time, the track can become misaligned, cracked, or lose its ability to support the drawer properly.

Symptoms of a bad track include:

• Drawers or shelves that do not slide smoothly or get stuck
• Uneven or tilted drawers
• Noise when opening or closing the drawers
• The track appears damaged or broken

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tempered glass refrigerator shelf provides a sturdy, easy-to-clean surface for organizing food and containers inside the fresh-food compartment. It restores usable storage space and keeps items level and visible. What it does:

• Replaces a broken, chipped or missing interior shelf so food items sit flat and stay organized
• Helps contain spills for easier cleanup compared with wire shelving
• Restores proper shelf spacing and usable storage in the refrigerator
• Fits into existing shelf tracks or support ledges to sit securely in place

• Remove food and any items from the area before installation
• Slide shelf into the existing shelf supports or brackets; avoid forcing or tilting the glass
• Wear gloves to protect hands from sharp edges if replacing a cracked shelf
• Do not use if glass is cracked or chipped; handle broken glass with care and dispose per local guidelines