Parts for Maytag MRT118FFFE04: Door Parts

Color: Black

Color: White

Color: Stainless

This mounting bracket secures internal components to the appliance chassis, restoring stable support and alignment. It replaces a worn, bent, or damaged bracket to reduce rattling and prevent parts from shifting during operation. What it does:

• Provides a secure mounting point for internal assemblies to the appliance frame
• Restores proper alignment when a loose or bent bracket causes vibration or noise
• Prevents components from shifting, which can lead to wear or intermittent operation
• Helps eliminate rattling, clunking, or movement-related symptoms during use

• One mounting bracket

• Disconnect power and water before beginning any repair
• Use original screws or fasteners; replace any stripped or damaged hardware

This door trim finishes the edge of the appliance door and shields underlying fasteners. Replacing a cracked or missing trim restores a clean, factory look and helps keep adjacent door components properly covered and aligned.

• Provides a finished edge for the door and protects exposed surfaces
• Covers gaps and fasteners, helping maintain a clean appearance
• Helps retain/align adjacent door panels or glass as designed by the manufacturer
• Typical symptoms: broken, warped, loose, rattling, or missing trim; visible gaps or sharp edges

• Disconnect power and allow any hot surfaces to cool before servicing
• Support or remove the door to avoid hinge strain
• Carefully remove the old trim; transfer any reusable clips or hardware from the original
• Seat the new trim evenly; tighten fasteners only until snug to avoid cracking

The Door trim is an OEM replacement part for Whirlpool refrigerators. It provides a sturdy support for storing items on the door, providing convenient access to frequently used condiments, beverages, and other essentials. This door shelf bar ensures that your items are securely held in place, preventing them from falling or shifting during opening and closing of the refrigerator door.  

A bad door trim can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as cracks, sagging, or difficulty in securely holding items, it may be time to replace the door shelf bar.

Symptoms of a bad door trim include:

• Cracks or damage on the bar
• Sagging or instability when holding items
• Difficulty in securely placing or removing items from the shelf

Repair your refrigerator by replacing the faulty or damaged door trim with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement door gasket creates an airtight seal around the refrigerator door to help keep cold air in and reduce frost buildup. It restores proper sealing to improve cooling consistency and energy efficiency. What it does:

• Seals the door edge to prevent cold air loss and reduce moisture/frost inside the cabinet
• Helps the compressor run less frequently by maintaining a stable internal temperature
• Commonly used when the existing gasket is torn, stretched, flattened, or no longer seals evenly
• Reduces warm spots and food spoilage that can result from a failing door seal

• Clean the door surface and gasket mounting channel before installing to ensure a tight seal
• Align the gasket evenly around the door and press into the channel; warm the gasket with a hair dryer if needed to ease installation (low heat only)
• Check door closing and seal after installation; avoid using sharp tools that can damage the gasket

The Gasket-Door (black) is an OEM component specifically designed for Whirlpool refrigerators. This rubber gasket forms a seal around the perimeter of the refrigerator door opening. It helps maintain interior temperatures and humidity levels.

Symptoms of a bad door gasket include:

• Inability to properly chill compartments and freezing performance issues  
• Excessive frost or moisture inside refrigerator sections
• Higher energy costs from inefficient temperature regulation
• Warm air infiltration indicated by higher than normal interior temps

Causes of degraded gasket performance typically include cracks, tears or compression set deterioration that compromise the sealed barrier over many years of use. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Door Gasket is an OEM replacement part for Whirlpool refrigerators. This white door gasket forms a resilient seal around the fridge door opening. Properly sealing the thermal barrier between interior compartments is essential for energy savings and food preservation. 

Causes of gasket failure include regular opening and closing that leads to compression over time. Cracks or breaks may occur from accidental impacts.

Symptoms of a leaking fridge door gasket include:

• Frost or condensation buildup along door edges  
• Cold air feeling when the door is opened
• Potential for cross-contamination of foods and odors
• Higher energy costs from inefficient sealing

Compatible models also include Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper units.

The Door Trim is an OEM component specifically designed for Whirlpool refrigerators. It surrounds the main refrigerator door providing an aesthetic finishing touch. 

Symptoms of a bad door trim can include:

• Cracks, chips, or fractures appearing along edges   
• Dents or warping distorting the trim shape
• Discoloration or peeling of painted surfaces

Causes related to repeated opening/closing stressing the plastic material as well as impacts compromising structural integrity. 

This replacement trims directly contours to fit the door, aligning perfectly to complete the appliance's look. Compatible models are those from brands such as Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore. 

This replacement name plate restores the appliance's identification label so model and serial information is legible and the exterior looks complete. It's a simple cosmetic and identification part that helps owners read key appliance info. What it does

• Replaces a faded, damaged, or missing identification label
• Restores readable model/serial/manufacturer details for service and registration
• Improves cosmetic appearance where the original label is worn or peeled
• Helps prevent confusion when ordering parts or scheduling repairs

• One replacement name plate

• Clean and dry the mounting surface thoroughly before installing
• Align carefully and press firmly if adhesive-backed; use the original fasteners if applicable
• Handle by the edges to avoid transferring oils or smudges to the label

The Door Shelf Rail is an OEM part for Whirlpool refrigerators. This part secures items on the refrigerator door shelves, preventing them from falling out when the door is opened or closed. It provides a barrier that helps keep food items organized and in place.

Causes of a bad door shelf rail can include wear and tear from regular use, damage from heavy items being placed against it, or accidental impact. 

Symptoms of a bad door shelf rail include:

• Cracks or breaks in the rail
• Loose or wobbly fit on the door
• Items falling off the door shelf
• Difficulty in securing the rail properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: White

Color: Stainless

Color: Black

The Flip-Up Shelf is an OEM part for Whirlpool refrigerators. This adjustable shelf provides flexible storage options within the refrigerator, allowing you to create additional space for taller items by flipping the shelf up when needed.  The shelf measures approximately 12 3/4" by about 4 1/2"

Causes of a bad flip-up shelf can include repeated heavy loading, which can cause stress and cracks, accidental impacts leading to breakage, or wear and tear over time that affects the locking mechanism.

Symptoms of a bad flip-up shelf include:

• The shelf not staying in the flipped-up position
• Cracks or breaks in the shelf material
• Difficulty in moving the shelf up or down
• The shelf not fitting securely in place

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This thimble is a small insert used in the freezer compartment. It reinforces a mounting hole, prevents liner wear, and helps keep attached hardware stable and properly aligned for smooth, quiet operation.

• Serves as a protective bushing for a hole in the freezer compartment liner
• Helps stabilize and align the component secured at that location
• Replaces cracked, worn, or missing inserts that can cause loose hardware, wobbling, or rattling
• Restores proper fit while helping prevent further wear to the liner

• Unplug the refrigerator and clear the work area in the freezer before service
• Remove the fastener/component to access the insert, then pull the old thimble straight out
• Press the new thimble fully into the hole; reinstall hardware without overtightening
• Use care—cold plastic and liner edges can be brittle or sharp

The Freezer Door Gasket is an OEM part for Whirlpool refrigerators. It is responsible for creating a tight seal between the freezer door and the cabinet, preventing cold air from escaping and maintaining the desired temperature inside. It prevents frost buildup and condensation, keeping your freezer contents fresh and frozen.

A bad freezer door gasket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as frost accumulation around the freezer door, reduced cooling efficiency, or a loose or torn gasket, it may be time to replace the freezer door gasket.

Symptoms of a bad freezer door gasket include:

• Frost buildup around the door area
• Reduced cooling efficiency
• Loose or torn gasket

Repair your refrigerator by replacing the faulty or worn-out freezer door gasket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Black

Color: Grey

The Door Gasket is an OEM part specifically designed for Whirlpool refrigerators. It provides an airtight sealing barrier around refrigerator doors.

Causes of a bad gasket include cracks and compression loss that develop after years of opening and closing doors. Material properties may become brittle and inflexible over time. 

Symptoms of a faulty door gasket include:

• Noticeable temperature loss inside fridges as cool air seeps out    
• Moisture accumulation caused from inadequate insulation  
• The door not sitting flush or binding due to compromised structure

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models as well.

The Door Gasket is an OEM part for Whirlpool refrigerators. This gasket provides a seal between the freezer door and the main cabinet, ensuring a tight closure and preventing cold air from escaping. It is made of high-quality materials that provide a reliable barrier against temperature fluctuations and help maintain cooling efficiency.

A bad freezer door gasket can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as frost buildup inside the freezer, decreased cooling performance, or a loose-fitting freezer door, it may be time to replace the  the worn-out or damaged freezer door gasket with this genuine OEM part.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• Decreased cooling performance
• A loose-fitting freezer door

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Door Trim is an OEM part for Whirlpool refrigerators. It acts as a trim and edging along refrigerator shelves located on the door. The shelf trim allows items placed on shelves to be properly contained and prevent accidental falls.

Causes of a bad shelf trim include cracks, chips or peeling of the trim material from years of use and stresses from items placed on shelves.

Symptoms of a bad shelf trim include:

• Gaps appearing around shelf edges allowing smaller items to fall through
• Loose or uneven fit of trim that distorts the shelf structure
• Visible fasteners or unfinished shelf edges

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Bracket-Door Stop is an OEM replacement part for Whirlpool appliances. This zinc-finished bracket is designed to prevent the appliance door from opening beyond its intended range, protecting both the door and surrounding components from potential damage. It ensures the door stays secure and functions smoothly during regular use.

Symptoms of a bad Bracket-Door Stop include:

• The door overextending when opened
• Difficulty in maintaining the door's position
• Visible bending, cracking, or damage to the bracket

Causes of a failing Bracket-Door Stop can include repeated stress from excessive force when opening the door, normal wear over time, or accidental impacts. A damaged bracket can compromise the door's alignment and overall functionality.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures panels, brackets, and other components in your appliance so they stay tight and properly aligned. Use it to replace missing, stripped, or rusted hardware and eliminate looseness, rattles, or gaps.

• Fastens parts to the cabinet/frame to maintain structural integrity
• Helps keep panels and assemblies aligned to reduce vibration and noise
• Replaces missing, damaged, or corroded screws during service
• Common fix for loose panels or components that no longer hold securely

• Disconnect power and shut off water or gas before servicing
• Match length and thread to the original screw for proper fit
• Hand-start threads to avoid cross-threading; tighten only until snug—do not overtighten
• Tighten them evenly to ensure proper alignment

Color: Grey

Color: Black

The Door Shelf Retainer End Cap is an OEM replacement part for Whirlpool refrigerators. This component is designed to secure and support the end of the door shelves, providing a clean and finished look while preventing items from falling off the edges.

Symptoms of needing to replace the door shelf retainer end cap include:

• Visible cracks, damage, or missing pieces
• Loose or wobbly door shelves
• Items falling off the ends of the door shelves

Causes of a faulty door shelf retainer end cap can include normal wear and tear over time, accidental impact or mishandling, or exposure to excessive moisture or temperature fluctuations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Compartment Door is an OEM part for Whirlpool refrigerators. It is designed to cover and protect specific compartments within the refrigerator, such as the dairy or deli section, helping to maintain the ideal temperature and humidity levels for stored items. It measures approximately 9 inches by 6 inches.

You should replace the compartment door if it becomes damaged or worn out. Causes of a bad compartment door can include cracks or breaks from frequent use, hinge damage, or warping due to temperature fluctuations.

Symptoms of a bad compartment door include:

• The door not closing properly
• Visible cracks or breaks
• Difficulty in opening or closing the compartment
• Reduced freshness of stored items due to improper sealing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.