Parts for Kenmore 253.51399101 (25351399101, 253 51399101): Shelves Parts

Refrigerator basket trim piece that attaches to the front edge of door or freezer baskets. Replace if cracked, broken, or missing to restore appearance.

This is a wire shelf assembly with trim designed for the freezer compartment. It provides a flat storage surface for organizing frozen foods. Replace this shelf if the wire rack is bent, rusted, or if the trim edging is cracked or missing, causing items to slide off or the shelf to sit unevenly on its supports.

Replace a cracked, broken, or missing refrigerator shelf to restore storage capacity. Provides a flat, sturdy surface for organizing food and containers.

Replace your refrigerator light socket when bulbs won't illuminate or burn out quickly. Provides secure bulb connection and prevents overheating. Verify fit.

Spill-safe cantilever sliding shelf for your refrigerator. Replaces cracked, broken, or damaged shelves. Easy to install replacement glass shelf.

Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.

Replacement lower crisper pan cover for refrigerators. Covers the bottom vegetable drawer. Replace if cracked, broken, or discolored plastic material.

Clear plastic cover that sits above the crisper drawer in your refrigerator. Replace if cracked, broken, or warped. Quick snap-in installation.

Regulates moisture in your refrigerator's crisper drawer. Replace this control assembly if the original is cracked, broken, or unresponsive.

Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.

Replace your refrigerator's cracked or broken crisper pan. Provides enclosed storage for fruits and vegetables. Installs in the lower compartment.

Lower crisper pan for refrigerators. Stores fruits and vegetables in the bottom compartment. Replace if cracked, broken, or missing for fresh food storage.

Decorative trim piece that attaches to the front edge of refrigerator shelves. Replace if cracked, broken, discolored, or missing for a clean look.

Supports and holds the meat or deli drawer in your refrigerator. Replace if broken, cracked, or worn. Installs on the left or right interior wall.

Right side hanger that supports your refrigerator's meat pan drawer. Replace if broken, cracked, or causing the pan to slide improperly or hang unevenly.

Glass insert that sits in the crisper cover frame above your produce drawers. Replace this part if your original is cracked, broken, or missing.

Clear glass shelf that sits above the crisper drawer in your refrigerator. Replace if cracked, shattered, or broken during cleaning or regular use.

Mounts to the freezer wall to support wire baskets. Replace if cracked, broken, or pulling away from the wall causing baskets to sag or fall out.

Side-mounted bracket that supports and guides freezer baskets in refrigerator freezer compartments. Replace when cracked, broken, or missing to restore basket support.

Mounts to the freezer wall to support wire baskets. Replace if cracked, broken, or pulling away from the wall causing baskets to sag or fall out.

Side-mounted bracket that supports and guides freezer baskets in refrigerator freezer compartments. Replace when cracked, broken, or missing to restore basket support.

Replacement deli drawer for your refrigerator's fresh food section. Restores organized storage for meats and cheeses when original is cracked or broken.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Stores and channels water from supply line to dispenser and ice maker. Replace if cracked, leaking, or damaged to restore proper water routing in your unit.

Replace your refrigerator's cracked or missing housing cover. Shields internal components, keeps out debris, and restores a clean finished look.

Factory replacement screw for securing panels, brackets, and trim inside your refrigerator. Needed when original screws are missing, stripped, or corroded.

Crisper light socket housing base for refrigerators. Installs in crisper drawer area to hold the light socket. Replace if cracked, broken, or missing.

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

Left hand side. For the right hand side order 241674402

Right hand side. For the left hand side order 241674401

Refrigerator not cooling properly? This heat exchanger kit improves cooling efficiency in the sealed system. Moderate difficulty repair for side-by-side models.

Protects wiring harness edges in your refrigerator from wear and abrasion. Replace if cracked, broken, or missing to prevent wire damage and insulation.

Secures tubes and wiring in your refrigerator. Replace if clips are broken or connections are loose. Confirm fit with your model number.

This is a push on John Guess design elbow used to connect two 5/16" plastic lines together.

Touch-up paint for appliances to cover scratches, chips, and worn areas on exterior surfaces. Restores appearance of refrigerators, ranges, and more.

Touch-up paint in bisque color for appliance exterior surfaces. Covers chips, scratches, and worn spots on refrigerator doors, range panels, and more.

The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.

The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.

Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.

Symptoms of needing Touch Up Paint include:

• Visible scratches or chips on the appliance's surface.
• Areas of rust or corrosion that need to be covered after treating the rust.
• The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.

This complete ice maker unit produces and dispenses ice cubes in your refrigerator's freezer compartment. It includes all internal mechanisms for water filling, freezing, and ice ejection cycles. Install this assembly if your ice maker has stopped producing ice, makes unusual noises, or produces malformed ice cubes.

Ice won't dispense through the door? A broken auger or cracked ice bin causes this. This complete ice container assembly is a simple slide-in fix in 5 minutes.