Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Craftsman 358350992: Shield / Cylinder / Muffler Parts

Parts for Craftsman 358350992: Shield / Cylinder / Muffler Parts

Location on Diagram
Part Description
Price & Availability
NI02
By: Husqvarna
Part Number: 530059905
$6.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
2
5.0 (1)
By: Husqvarna
Part Number: 573992801

The ignition coil module is a part found in chainsaws that electricity runs through. It also helps transmit electricity to the spark plug so the tool works properly. The electricity builds sparks in the plug which ignites the fuel in the engine to ensure the chainsaws can power on. If the ignition coil fails, it will prevent the saw from starting since the spark plug is unable to operate. Testing the ignition coil is simple and can be done in 15 minutes or less. Remove the chainsaw's spark plug wire and then take out the spark plug. Remove the recoil starter on the side and look for the kill switch. This needs to be disconnected from the harness before the starter assembly is replaced. Spread the spark plug gap and place the boot on top of it. Next, pull the start rope while watching the plug. If there is no spark, the ignition coil module needs to be replaced. This is a genuine OEM part that comes directly from the manufacturer. It is compatible with chainsaws made by Poulan, Poulan Pro, and Craftsman. It comes as a single individual ignition coil. An ignition coil tester can be useful to have for replacement.

More
$53.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
3
Product photo
By: Husqvarna
Part Number: 530016432

Fastening screw for chainsaws. Connects and holds together various chainsaw components. Replace if screw is stripped, missing, or damaged.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
NI04
By: Husqvarna
Part Number: 530049647
$9.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
4
Product photo
By: Husqvarna
Part Number: 530058661

This part is a replacement ground strap. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a damaged or defective ground strap in a variety of chainsaw models. The ground strap works to ground a live current and is an important safety feature. Equipment should not be operated without a working ground strap. This part connects to the ignition module of the chainsaw, which transfers an electrical current to the spark plugs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this ground strap, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this ground strap is suitable for use on several different models of chainsaws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

More
$3.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
5
Product photo
5.0 (1)
By: Husqvarna
Part Number: 530057943

Wire harness assembly connects ignition module to engine switch on chainsaws. Replace if wires are frayed, damaged, or connections are loose or corroded.

More
$9.43

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
6
By: Husqvarna
Part Number: 545045801
$10.90

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
8
Product photo
By: Husqvarna
Part Number: 530057891

Chainsaw won't start or stay running? A faulty ignition switch lever prevents proper engine control. This switch replacement restores start/stop function.

More
$8.35

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
9
Product photo
By: Husqvarna
Part Number: 530057908

Replacement spring for chainsaw ignition switches. Installs inside the switch assembly. Needed when original spring is broken, worn, or missing.

More
$6.73

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
10
Product photo
By: Husqvarna
Part Number: 530059399

This is a genuine OEM replacement choke lever is sourced from the manufacturer for use on chainsaws. The choke lever is triggered by the choke knob to open the choke when cranking the chainsaw's engine. The choke is used to limit airflow into the carburetor when starting the engine. In cold temperatures, this enriches the mixture of fuel to air and forces this into the carburetor.Normal wear and tear can cause the choke lever to crack and possibly break. Accidents such as dropping the chainsaw may also cause the lever to break. Without the choke lever, the choke cannot be engaged when needed and the engine may not start in cold weather. When this occurs, the lever will need to be replaced. This is a simple repair that requires a Phillips head screwdriver, flat head screwdriver, ratchet and socket set, and torque drivers. Remove the top cover to access the choke knob. Remove the cover from the air filter and the ignition switch lever. Disconnect the choke from the carburetor linkage and remove the lever. Install the new lever. Connect the new lever to the carburetor linkage. Reinstall the ignition switch lever, air filter cover, and outer covering. This choke lever is designed for use on chainsaws. It is sold individually. This choke lever is manufactured for Poulan chainsaws.

More
$0.96

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
11
Product photo
By: Husqvarna
Part Number: 530059001

Protective cover that secures the air filter on your chainsaw. Replace if cracked, broken, or missing to prevent filter damage and debris entry.

More
$8.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
12
Product photo
By: Husqvarna
Part Number: 530057869

Filters air to remove dust and debris that could damage your chainsaw engine. Replace regularly as part of normal maintenance. Confirm fit with your model.

More
$8.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
13
Product photo
By: Husqvarna
Part Number: 530016425

Replacement mounting screw for chainsaws. Secures internal and external components together. Order a new screw if yours is stripped, missing, or damaged.

More
$7.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
14
Product photo
By: Husqvarna
Part Number: 545046901

This air filter housing is a genuine Husqvarna part, sold individually. This air filter housing can be used as a replacement part for a chainsaw. This air filter housing provides stable placement for the air filter; the air filter protects the internal workings of the chainsaw from the accumulation of debris that might cause damage to the engine.The air filter housing might have to be replaced if it suffers damage that prevents it from protecting the air filter of the chainsaw. If the air filter housing is punctured, torn, ripped, or eroded to the point that it exposes the air filter to damage, the air filter housing should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter housing is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

More
$9.05

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
15
Product photo
5.0 (1)
By: Husqvarna
Part Number: 545070601

Mixes air and fuel for your chainsaw engine. Replace if cracked, damaged, or leaking. Installs on engine, may include primer and fuel lines.

More
$71.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
16
Product photo
By: Husqvarna
Part Number: 580727101

Replacement fuel line kit for chainsaws. Includes tubes that feed fuel to carburetor and return unused fuel to tank. Replace if cracked, brittle, or leaking.

More
$18.54

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
18
By: Husqvarna
Part Number: 530071889

Fix chainsaw starting problems or rough idling with this carburetor adapter kit. Restores proper fuel-air mixture for smooth engine operation.

More
$29.77

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
21
Product photo
By: Husqvarna
Part Number: 530071884

This product is the chainsaw's engine cylinder, which holds fuel ignited by the spark plug. It fits into the existing chamber and houses the pistons during use. It is attached to the carburetor for fuel injection. The spark plug is set within it to ignite the fuel. This part has to be screwed securely into place prior to use and requires lubrication for the engine to run smoothly. If the engine suffers from poor fuel ignition, or leaking fuel, the cylinder may be cracked. When installing the new part, a few holes may require a tap to fit each specific machine. Pistons and bolts sold separately. Existing parts should be cleaned prior to use. This OEM replacement part is sourced straight from the manufacturer and works with certain models of Poulan and Husqvarna small engines.

More
$59.54

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
22
By: Husqvarna
Part Number: 530058660
$6.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
23
5.0 (1)
By: Husqvarna
Part Number: 545006007

Complete muffler kit for chainsaws. Includes all components for installation. Replace if exhaust system is damaged, cracked, or rusted out.

More
$29.77

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
24
By: Husqvarna
Part Number: 530057942
$3.61

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
26
Product photo
By: Husqvarna
Part Number: 545006056

This is a genuine replacement spark arrestor kit that is used with certain styles and models of chainsaws. The spark arrestor kit will attach to the cylinder gasket and is designed to catch any particles that are coming from the engine that are hot or likely to create a fire risk. This ensures that the internal combustion engine can operate effectively. When the spark arrestor is damaged or worn, or if pieces go missing, it will not be able to give the engine the protection from flammable debris that it needs. A replacement is necessary for the safe operation of the chainsaw. This OEM authentic spark arrestor kit is manufactured by Poulan and compatible with over 50 of the chainsaws that are made by the brand. This kit includes the screen, the metal arrestor, and the nut that connects the components and helps secure the entire assembly to the engine's cylinder gasket. This part replacement will require a nut driver and a set of pliers. Allow the engine to cool completely and always disconnect the spark plug when performing engine repairs or internal replacements. Owners will want to wear gloves for hand protection, as well.

More
$8.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
27
Product photo
By: Husqvarna
Part Number: 530016338

Secures the muffler cover to the muffler on chainsaws and small engines. Replace if screw is stripped, missing, or no longer holds the cover securely.

More
$4.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
28
By: Husqvarna
Part Number: 545015301

This replacement part is an insert transfer and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Insert transfers are small but very important to many different appliances like chainsaws. These parts reduce friction inside of the motor and piston. Without this part the engine could become damaged.A new insert transfer might be needed if the user hears noises coming from the equipment that are not normal. If there is excess heat coming from inside the appliance this might also be the cause. It is common that insert transfers become stripped overtime due to normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
29
By: Husqvarna
Part Number: 587602501
$55.75

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
30
By: Husqvarna
Part Number: 530016417

M6-1.0 x 25mm bolt for chainsaws. Secures various components on the saw body. Replace if stripped, corroded, missing, or damaged during disassembly.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
31
By: Husqvarna
Part Number: 530057941

Replacement crankcase casting for chainsaws. Houses the engine's internal components. Order when original casting is cracked, damaged, or warped.

More
$8.35

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
32
Product photo
By: Husqvarna
Part Number: 530056363

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

More
$12.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
33
Product photo
By: Husqvarna
Part Number: 530071883

Internal engine component that moves within the cylinder to drive the crankshaft. Replace when worn, burnt, cracked, or causing low compression issues.

More
$36.40

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
35
By: Husqvarna
Part Number: 545160401

Piston ring for gas chainsaw engines. Seals the combustion chamber around the piston. Replace if worn, damaged, or causing poor compression.

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
36
Product photo
By: Husqvarna
Part Number: 545015401

This replacement part is a transmission insert and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This transmission insert is used in chainsaws and allows the transmission to operate smoothly. A new transmission insert might be needed if the current one is damaged or missing. If there are noises coming from the inside or the appliance won't stop or start properly, it might be due to a bad transmission insert. Be sure the engine is completely turned off before attempting to start this repair. Because this part is close to other areas that can be dangerous, it is recommended that the user wear work gloves during the job to prevent injury. This transmission insert is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit. This part is sold individually.

More
$6.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
38
Product photo
By: Husqvarna
Part Number: 530016426

Replace missing, stripped, or damaged mounting screws on your chainsaw or trimmer. Standard hardware fastener for securing components and housings.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
40
Product photo
By: Husqvarna
Part Number: 530057926

Flexible intake tube that connects the adapter to the carburetor on gas chainsaws. Replace if worn, cracked, detached, or missing to restore proper fit.

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
42
Product photo
5.0 (1)
By: Husqvarna
Part Number: 530071894

Complete gasket set for chainsaws seals engine components during motor service or repair. Replace when servicing engine to prevent fuel leaks. Verify fit.

More
$15.45

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google