Snow Removal Equipment Fastener
Genuine Husqvarna part
By: Husqvarna
Part Number: 532409149
Flanged hex nut for lawn tractors and outdoor power equipment. Replace if threads are stripped, nut is missing, or hardware has corroded or loosened.
More
$4.10
- Compare At:
-
$4.51
- You Save:
-
$0.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 731-04870
Spacer for snow throwers and small engines. Fits over bolts or screws to maintain proper spacing between components. Replace if missing or damaged.
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 738-04419A
This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 938-3056
Shoulder bolt for riding mowers and lawn tractors. Used as an axle for wheels and deck components. Replace if bent, worn, or stripped from regular use.
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 530016449
This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.
More
$7.64
- Compare At:
-
$9.02
- You Save:
-
$1.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 532003146
This hairpin clip is a metal fastener, also known as a spring cotter or retaining pin. This is standard hardware that features a straight edge and an indentation to ensure secure attachment to desired parts or equipment.
This reusable formed wire is easy to install and uninstall and has multiple applications. This part is commonly used in conjunction with clevis pins.
This replacement hairpin clip comes in a polished finish. Use this genuine OEM replacement part on lawnmowers and tillers from Husqvarna, Craftsman, Murray, Weed Eater, Ryobi, Poulan and Poulan Pro. This item is priced and sold individually.
More
$4.38
- Compare At:
-
$5.26
- You Save:
-
$0.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 532178515
Hardened flat washer for lawn tractors and riding mowers. Used to secure components and attachments. Replace if worn, missing, or damaged.
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 532179617
Replacement mounting bolt for gas snowblowers and walk-behind mowers. Secures components and panels. Replace if bolt is stripped, missing, or damaged.
More
$7.79
- Compare At:
-
$9.27
- You Save:
-
$1.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 532405400
Metal clamp that secures the clean-out tool to your snowblower's auger housing. Replace if clamp is bent, broken, or missing to properly store tool.
More
$4.95
- Compare At:
-
$5.89
- You Save:
-
$0.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 532414736
Metal spacer used in lawn tractor fastening assemblies to reduce friction between components. Replace if worn, damaged, or missing during repair.
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-0276
Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.
More
$4.55
- Compare At:
-
$5.41
- You Save:
-
$0.86
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-0642
This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-1650
The shoulder screw is used in places where a spacer or bearing surface is needed, since the top half of the screw is unthreaded. These fasteners are often used for guides, pivot points, mounting pins, axles, and even a shaft for bearings and bushings in various MTD engines.
With regular use, the screws can wear down or be lost. Always repair the missing hardware promptly with genuine OEM replacements. Disengage the spark plug and wear gloves when performing work on engines for safety.
This genuine OEM replacement shoulder screw has been designed to be compatible with machines from MTD, Troy-Bilt, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Craftsman. It can be used for multiple applications and in multiple locations in different models of lawnmowers, tractors, and chippers that use the screw in various applications. Check your parts diagrams for the exact location and use of these screws before ordering. This is sold as an individual unit; order multiple quantities as needed.
More
$5.45
- Compare At:
-
$6.49
- You Save:
-
$1.04
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-3144
The replacement screw seen here is made from high-quality, durable metal. It is an identical replacement for a faulty screw in many types of lawn and garden equipment. The screw features a hex-bolt shaped head and is used for various applications in the machines. Owners will want to refer to diagrams of their model to ensure the correct application for the screw. A screw may need to be replaced for any number of different reasons. In some cases, the screw could become lost when making other repairs to the machine. It could also become bent or the threads could be damaged. Corrosion is also a possibility over time. Replacing the screw is typically considered a fast and easy repair. The screw is a genuine OEM replacement part that is sold individually. The screw can be used for many models of snowblower, lawnmower, chainsaw, tiller, string trimmer, log splitter, edger, and wood chipper. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.
More
$4.95
- Compare At:
-
$5.94
- You Save:
-
$0.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 712-0241
This hex nut is designed for use with select trimmers and mowers. It is a standard hardware part that may have multiple applications depending on the type of unit and model. The nut is typically used to secure engine components or housing elements to provide safe use of the machine. These nuts are durable, but they are small and can become lost during other repairs. The constant exposure to vibrations and use can also cause them to strip or become damaged over time. Either way, a replacement with this genuine hex nut will resolve the issue and get equipment back in working order. This genuine OEM hex nut is manufactured to exact standards and sourced from the manufacturer. It can be used with trimmers and mowers from RYOBI, MTD, Bolens, Troy-Bilt, Yard Machines, Huskee, Yard Man, and Cub Cadet. Check the parts diagram for exact application and location of this nut and note that it may have multiple uses on select models. This hex nut is sold individually, and additional nuts will require the purchase of multiple pieces. In order to replace this nut, a hex socket wrench and driver will be required. Always wear gloves for safety.
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 712-04217
This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.
More
$4.95
- Compare At:
-
$5.84
- You Save:
-
$0.89
Out Of Stock
Usually ships within 4 - 14 days