Parts for Frigidaire FRSS2323AB5: System Parts

Includes service line.

Connects your refrigerator to the wall outlet to supply electricity. Replace if the original cord is frayed, damaged, or has exposed wires from wear or moving.

Fix excessive frost buildup in your side-by-side refrigerator with this defrost heater assembly. Prevents ice accumulation on evaporator coils.

Not cooling properly or freezer warm? This evaporator coil absorbs heat to keep your refrigerator cold. Moderate difficulty repair for side-by-sides.

Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.

The Wire Harness is an OEM part for Frigidaire refrigerators. It connects various electrical components within the refrigerator, ensuring proper communication and voltage.

A bad wire harness can be caused by wear and tear, damage, or electrical issues. When the harness becomes faulty, it can result in issues such as intermittent or complete loss of power, malfunctioning controls, or improper functioning of the refrigerator's features.

Symptoms of a bad wire harness include:

• Loss of power to the refrigerator or specific components
• Inconsistent or erratic operation of controls or displays
• Malfunctioning lights, fans, or other electrical features

Replace your faulty wire harness with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Thermistor Kit is an OEM part for Frigidaire refrigerators. Consisting of a thermistor temperature sensor and mounting bracket, this kit plays a key role in refrigeration system operation. Strategically positioned inside the unit, the sensor continually monitors interior temperatures to maintain proper cooling levels throughout all compartments. 

Symptoms of a bad thermistor kit include:

• Fluctuating or uncontrollable temperatures within sections of the fridge
• The condenser or evaporator fans running excessively long periods  
• Ice buildup inside compartments disrupting temperature regulation

Causes can involve thermistor degradation over time losing sensitivity and providing inaccurate reads to system computers.  

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Secures the compressor to the mounting bracket in your refrigerator. Replace if washer is missing, cracked, or worn to restore proper support.

Clip spring for refrigerator shelves and compartments. Replaces broken, missing, or worn clips that secure parts in place. Direct fit replacement.

Collects water from evaporator defrost cycles. Mounts near compressor under refrigerator. Replace if cracked, leaking, or damaged to prevent odors.

Fix a refrigerator that stopped cooling overnight with this inverter control board. Moderately easy DIY repair with just two harness connectors to attach.

Black rubber mounting grommet that secures tubes and wires in your refrigerator. Replace if cracked, worn, or missing to properly hold components in place.

This #8-32 x 3/8 screw secures appliance panels, brackets, and assemblies. Replace a missing or stripped fastener to keep parts tight and aligned, reduce vibration, and restore proper fit in compatible refrigerators and freezers.

• Machine-thread fastener sized #8-32, 3/8-inch length
• Secures control housings, trims, covers, and support brackets per model design
• Replaces missing, worn, or corroded screws that cause loose or rattling parts
• Helps maintain alignment and stability after service

• Unplug the appliance; shut off water if applicable
• Match thread size to the original and start by hand to avoid cross-threading
• Use the correct driver; do not overtighten, especially into plastic
• Verify component alignment and operation after fastening

• Thread size: #8-32
• Length: 3/8 inch

Secures wire harnesses and ground wires to your refrigerator cabinet. Replace if broken or missing to prevent wire damage. Verify fit with your model.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Replacement mounting screw secures panels, brackets, and trim inside refrigerators and freezers. Restores factory assembly when original fasteners are missing.

Positions the condenser fan and motor in the rear machine compartment. Replace if cracked, warped, or damaged to restore proper airflow direction.

Fix warm spots and uneven cooling in your refrigerator. This evaporator fan motor circulates cold air across the evaporator coil for consistent temps.

Refrigerator not cooling properly? A damaged condenser fan blade prevents airflow over the condenser coils. Quick DIY fix—simply push into place.

Secures the evaporator cover inside your refrigerator's freezer compartment. Replace this metal bracket if bent, broken, or missing to restore alignment.

Supports refrigerator crisper or bin drawers for smooth gliding. Replace when drawers stick or bind. Confirm fit with your model number listed.

Metal rivet fastener permanently secures panels, brackets, and internal components in refrigerators. Replace damaged, missing, or worn rivets to restore fit.

Routes defrost water from the freezer evaporator to the drain pan. Replace if cracked, split, or clogged to prevent leaks under your refrigerator.

This replacement water fill tube directs water from the refrigerator supply to the ice maker or water dispenser, helping restore proper filling and reduce leaks from cracked or clogged tubing. It's a direct-fit service part. What it does

• Channels water from the supply line to the ice maker or dispenser for normal fill cycles
• Helps stop leaks or drips caused by cracked, kinked, or deteriorated tubing
• Restores consistent fill volume when original tubing is damaged or plugged
• Works with factory fittings and routing to maintain correct water flow

• One replacement water fill tube

• Turn off the refrigerator and shut off the water supply before starting
• Disconnect electrical power and relieve water pressure by disconnecting the supply briefly
• Use proper fittings and hand tools; tighten connections to OEM torque recommendations to prevent leaks
• Inspect nearby clamps and valves during replacement and replace any worn parts

This electrical connector provides a secure, factory-fit connection in the appliance's wiring harness to restore proper electrical continuity and reliable operation. It replaces a damaged or loose plug that can cause intermittent power or component failure. What it does

• Joins two wiring harness leads to restore a secure electrical connection.
• Prevents intermittent power, sparking, or loss of function caused by corroded or broken terminals.
• Helps ensure consistent power to controls, motors, or components served by the harness.
• Use when the original connector is cracked, melted, loose, or has damaged terminals.

• One electrical connector.

• Disconnect power to the appliance before inspecting or replacing electrical parts.
• Use appropriate tools for safe removal and installation; avoid forcing connectors to prevent wire damage.

Secures the evaporator or condenser fan shroud to the refrigerator cabinet. Replace this mounting screw if stripped, missing, or broken during repair.

Foam seal tape creates airtight barriers around refrigerator components. Replace when worn, compressed, or damaged to restore proper sealing and efficiency.

Genuine mounting screw secures panels, brackets, and components inside your refrigerator. Replace missing, stripped, or damaged screws to stop rattling.

Fixes refrigerator not cooling, lights not working, or intermittent power issues. This wire harness connects electrical components in side-by-side models.

Secures refrigerator grille or trim to cabinet, preventing rattles and gaps. Replace when broken or missing to restore proper panel alignment. Verify fit with your model number before ordering.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.