Parts for Frigidaire FRSS2323AB5: Shelves Parts

This replacement freezer shelf restores stable, organized storage in the freezer compartment. Replacing a broken or missing shelf helps maximize usable space, keep items level, and support proper airflow for consistent performance.

• Provides a sturdy surface to store and organize frozen foods
• Seats in the factory side supports for correct spacing and fit
• Helps maintain air circulation between shelf levels
• Typical symptoms: broken or sagging shelf, items tipping, shelf won't stay seated, or a missing shelf

• Remove or secure food from the area where the shelf installs
• Align the shelf with the side rail slots and slide or seat it fully into place
• Confirm both sides are engaged and the shelf is level before loading
• Handle carefully; wear gloves to protect hands

This shelf and trim assembly replaces a damaged or worn refrigerator shelf trim to restore a secure shelf edge and improve storage stability. It provides the finished trim piece that retains items and keeps the shelf seated correctly. What it does:

• Replaces cracked, chipped, or missing shelf trim so food and containers stay securely on the shelf
• Restores the shelf edge that helps prevent items from sliding off when opening the door
• Re-establishes a proper fit between the shelf and cabinet for stable storage
• Helps maintain the refrigerator's interior appearance by replacing worn trim

• One shelf and trim assembly

• High-level replacement only — remove food and shelves before installing
• Use basic hand tools; avoid overtightening to prevent cracking the trim
• If the shelf is damaged, replace the shelf and trim together for best fit
• Disconnect power only if service requires accessing electrical components

Replacement shelf assembly for the freezer compartment restores a sturdy, level surface for food storage and organization. Replace a damaged or missing shelf to recover capacity, maintain proper spacing, and keep items from shifting.

• Creates a rigid support surface for items in the freezer section
• Maintains intended storage layout and airflow when installed in the correct position
• Replaces a bent, broken, rusted, or missing shelf
• Helps prevent tipping and overcrowding that can damage contents

• Unplug the appliance and wear gloves for safety.
• Remove or relocate food; slide or lift the old shelf out of its supports.
• Align the new shelf with the rails or tabs and fully seat it.
• Verify the shelf is level and secure before loading.

The Shelf Trim is an OEM replacement part for Frigidaire refrigerators. It is a thin strip that lines the front edge of shelves inside the refrigerator and freezer compartments. The shelf trim assists in securing shelf placement while also providing a finished edge that protects shelves from accidental damage. 

Causes of a bad shelf trim can include dents, bends or cracks developed over time from repetitive loading and unloading of items on shelves. Exposure to excessive impacts from heavy items being dropped can also damage shelf trim panels.

Symptoms of a bad Shelf Trim include:

• Gaps appear between shelves and refrigerator walls where the trim used to cover 
• Shelves that no longer sit flush or steadily within the refrigerator/freezer 
• Sharp edges of bent or damaged trim that can cut or snag on items

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Socket is an OEM part for Frigidaire refrigerators. It is responsible for holding and connecting the light bulb in the refrigerator, allowing for proper lighting inside the appliance.

A bad light socket can be caused by electrical issues, physical damage, or wear and tear over time. Signs of a faulty light socket include a non-functional light bulb, flickering or dim lighting, or a loose connection.

Symptoms of a bad light socket can include:

• The refrigerator light not turning on 
• Intermittent flickering or dimming of the light
• Difficulty in installing or removing the light bulb
• Visible damage on the socket

Replace your malfunctioning light socket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This small plastic retainer clip secures interior trim and components so panels and shelves stay aligned and rattle-free. A direct-fit replacement that restores proper mounting where the original clip is broken or missing. What it does

• Holds interior trim, liners or lightweight panels in place to prevent gaps or movement.
• Stops rattling or vibration caused by a loose or damaged retainer.
• Restores secure mounting after a broken or missing clip.
• Works where a snap-in or press-fit fastener is required.

• Disconnect power to the appliance before beginning any repairs to avoid electrical hazards.
• Access the clip location by removing the affected trim or panel per your model's service instructions.
• Clip typically snaps into a hole or slot; press firmly until it seats. Small pliers may help for removal/installation.
• If mounting area is damaged, inspect surrounding parts and replace as needed for a secure fit.

The Shelf Assembly is an OEM part for Frigidaire refrigerators. It provides an adjustable shelving surface for organizing items within the refrigerator compartment.

Causes of a bad shelf assembly can include breakage from overloading or impact damage over time. Bent or weakened metal supports may also lead to instability.

Symptoms of a failing shelf assembly include:

• Gaps between shelf and refrigerator walls where cold air can escape  
• Items sliding off or tipping through due to loose or warped shelf panels
• Broken shelf clips that inhibit proper level adjustment  
• - Detached or missing portions of the shelf assembly

This OEM shelf is also compatible with select Electrolux, Kenmore, Kelvinator, and KitchenAid refrigerator models.

This crisper cover is the flat shelf that sits over the refrigerator's crisper drawer, providing a stable surface and helping keep produce contained. It restores proper shelf support and helps limit spills into the drawer below. What it does:

• Replaces a cracked, chipped or missing crisper cover to restore usable shelf space
• Keeps food and containers stable above the crisper drawer
• Helps contain small spills and prevents direct drips into the crisper
• Maintains the refrigerator's internal layout so drawers open and close correctly

• Remove all items from the affected area before installing
• Slide or set the cover into the shelf rails/grooves; do not force it into place
• Handle carefully to avoid chips or cuts; replace if damaged
• Clean with mild detergent and a soft cloth; avoid abrasive cleaners

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

This genuine replacement crisper pan restores the bottom surface of your refrigerator's produce drawer to contain spills and support stored fruits and vegetables. It helps keep the crisper stable and easier to clean. What it does:

• Provides a stable bottom for the crisper/drawer and supports stored produce
• Contains leaks and spills to prevent messes from reaching the cabinet floor
• Restores proper drawer seating and helps prevent sliding or uneven operation
• Helps maintain an easy-to-clean surface for fresh food storage

• Empty the crisper drawer and remove it per your owner's manual before replacing the pan
• Lift the old pan out of the drawer frame and set the new pan into place, ensuring it seats fully
• Wash the new pan with warm, soapy water and dry before returning food to the drawer
• Handle carefully to avoid pinching fingers; no electrical disconnection is required for this part

This replacement basket restores secure, organized storage or containment inside your appliance so items stay put and the compartment works like new. It's a direct-fit cosmetic and functional replacement when the original basket is damaged or missing. What it does:

• Provides a sturdy place to hold items and keeps them from shifting or falling through
• Replaces cracked, warped, or broken baskets that no longer support loads
• Helps restore proper airflow or organization where the basket is used
• Prevents stored items from contacting internal components or obstructing operation

• Turn off and unplug the appliance before installing
• Remove any remaining contents and old basket before fitting the new part
• Slide or snap the basket into the existing tracks or mounting points—do not force

The Freezer Basket Hanger is an OEM part for Frigidaire freezers. This component is designed to support the freezer basket, ensuring it stays securely in place, allowing for organized storage and easy access to frozen items.

You should replace the freezer basket hanger if it becomes damaged or fails to hold the basket properly. Causes of a bad freezer basket hanger can include regular wear and tear from frequent use, accidental impacts, or exposure to heavy loads that exceed its design specifications.

Symptoms of a bad freezer basket hanger include:

• The freezer basket not staying in place
• Difficulty in sliding the basket in and out
• Visible cracks or breaks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Freezer Basket Hanger is an OEM part for Frigidaire refrigerators. This component supports the freezer basket, ensuring it stays securely in place and slides in and out smoothly. The hanger is crucial for organizing and maximizing the storage space in the freezer compartment.

Causes of a bad hanger can include repeated use leading to wear and tear, exposure to heavy loads, or accidental breakage. A faulty hanger can lead to instability and difficulty accessing the freezer basket.

Symptoms of a bad freezer basket hanger include:

• Freezer basket not staying in place
• Difficulty sliding the basket in and out
• Freezer basket sagging or tilting
• Visible damage or cracks in the hanger

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This factory fastener secures appliance panels and components. Replace a missing, stripped, or corroded screw to restore a tight, rattle-free fit and keep brackets and covers properly aligned.

• Fastens panels, brackets, and internal parts as specified by the manufacturer
• Helps maintain alignment and reduces vibration/rattling
• Replace if the head is stripped, threads are damaged, or corrosion is present
• Symptoms include loose/missing hardware, gaps, or rattling during operation

• Disconnect power; shut off gas/water if applicable before servicing
• Use the correct driver/bit size to avoid stripping the head
• Start threads by hand to prevent cross-threading; do not overtighten
• Match screw length/thread to the location; replace in sets when required

This is a factory replacement screw fastener used to secure components in your appliance. It restores a tight, rattle-free fit for panels, brackets, and trim when an original screw is missing, stripped, or corroded.

• Secures panels, brackets, and trim to the appliance cabinet or liner
• Replaces a missing, stripped, or rusty screw
• Helps eliminate looseness, vibration, or rattling components
• Maintains proper alignment and a clean, factory fit

• Unplug the appliance before servicing; if near water lines, shut off the supply
• Match to the original and install in the same location/orientation
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
• Keep and reuse any original washers or spacers if present

Right hand side. For the left hand side order 241674401

Left hand side. For the right hand side order 241674402

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling