Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Whirlpool 4KWED4900BQ1: 02 - Top And Console Parts

Parts for Whirlpool 4KWED4900BQ1: 02 - Top And Console Parts

Location on Diagram
Part Description
Price & Availability
2
By: Whirlpool
Part Number: W10121161
$84.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
3
Best Seller
Product photo
4.9 (165)
By: Whirlpool
Part Number: WPW10185982

Dryer only runs on one setting or shuts off early? The timer controls drying cycles and heating. Takes about 15 minutes to replace with basic tools.

More
$105.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
4
By: Whirlpool
Part Number: WPW10112668
$63.65

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
5
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP3400818

Fixes loose or wobbly timer controls by securing the timer assembly to its mounting bracket. Simple 5-minute repair restores proper cycle operation.

More
$7.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
6
By: Whirlpool
Part Number: W10601020
$23.69

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
7
Product photo
By: Whirlpool
Part Number: WP8565954

Endcap trim piece that covers the console edge on your dryer. Replace if cracked, broken, or missing for a finished appearance and proper coverage.

More
$45.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
8
Best Seller
Product photo
4.9 (16)
By: Whirlpool
Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

  • Loose console assembly that is not securely fastened  
  • Misaligned or dangling controls that do not sit flush
  • Dislodged console at risk of detaching from housing
  • Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$20.38

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
9
Best Seller
Product photo
4.6 (8)
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
10
Best Seller
Product photo
4.9 (22)
By: Whirlpool
Part Number: WP8536939

This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.

More
$9.63

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
11
Best Seller
Product photo
4.8 (5)
By: Whirlpool
Part Number: WP3390631

10 - 16 x 1/2

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
12
Product photo
By: Whirlpool
Part Number: WP3405156

This rotary on/off switch controls the dryer's Finish Guard (also called Wrinkle Guard/Wrinkle Shield) feature. Replacing it restores proper control of the post-cycle intermittent tumbling that helps reduce wrinkles, preventing the feature from being stuck on or off.

  • Provides 2-position on/off selection for the Finish Guard/Wrinkle Guard function
  • Failure can cause the feature not to engage or to stay on after the cycle ends
  • Knob may feel loose or fail to click when the switch is worn
  • Mounts in the control console and interfaces with the external selector knob
What's included: 1 rotary switch Installation notes:
  • Disconnect power before servicing
  • Access through the control console; remove paneling as needed
  • Transfer wires one at a time or photograph connections for reference
  • Reinstall using the existing knob and mounting hardware

More
$69.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
13
Product photo
4.7 (3)
By: Whirlpool
Part Number: WPW10034380
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

14
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP8565957

This left end cap assembly replaces a damaged or missing left-side trim piece to restore the appliance's finished appearance and protect internal components from debris. It fits where a left end cap mounts on the control/door edge. What it does:

  • Covers and protects the left edge of the control panel/door area from impacts and dirt
  • Restores the factory appearance when the original end cap is cracked, broken, or missing
  • Helps secure adjacent trim and prevents gaps that can catch clothing or allow debris
  • Prevents vibration or rattling caused by a loose or damaged end cap
What's included:
  • One left end cap assembly
Install notes:
  • Disconnect power (unplug or shut off breaker) before beginning work
  • Removal/installation typically requires removing nearby trim or screws; handle clips gently to avoid breakage
  • Use existing mounting hardware unless replacement hardware is explicitly specified

More
$44.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
15
Best Seller
Product photo
4.9 (14)
By: Whirlpool
Part Number: WP3399639

Dryer not heating or stuck on one temperature? This temperature selector switch controls heat settings. Moderate DIY repair with video guide available.

More
$59.48

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
17
Product photo
5.0 (20)
By: Whirlpool
Part Number: WPW10034750

Color: gray. Measures about 3 inches in diameter.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

18
Product photo
By: Whirlpool
Part Number: WPW10034790

White plastic control knob for dryer control panel. Replaces cracked, broken, or missing knobs that prevent cycle or temperature selection.

More
$40.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
19
Product photo
By: Whirlpool
Part Number: WP8568314

Replacement console strap that secures the appliance control panel to the cabinet, restoring stable console alignment and preventing the control panel from shifting or sagging during use for safer, neater operation. What it does:

  • Secures the control console to the cabinet to prevent wobble, tilt, or separation.
  • Replaces a worn or broken strap commonly causing a loose or misaligned control panel.
  • Helps reduce strain on control harnesses and connectors that can occur when the console moves.
  • Matches OEM fit so the console remains properly seated and functional.
What's included: One console strap. Install notes:
  • Disconnect power to the appliance before beginning any repair.
  • Typically accessed by removing the console or control panel; retain all screws and clips for reassembly.
  • Use common hand tools (screwdriver, nut driver) and follow the model-specific service manual for exact steps.
  • If wiring connectors are disturbed, verify secure connections before restoring power.

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
20
Best Seller
Product photo
4.8 (14)
By: Whirlpool
Part Number: WP488729

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

More
$7.94

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
21

Top

By: Whirlpool
Part Number: 8559781
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

22
By: Whirlpool
Part Number: 3952439
$30.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
23
By: Whirlpool
Part Number: W10598019
$151.93

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
23A
By: Whirlpool
Part Number: W10598017
$100.10

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google