Parts for Lg T1789EFHT: Top Cover Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Trim cap that snaps into place to hide fasteners and openings on your washer. Replace if cracked, broken, missing, or worn to restore a clean, finished look.

Replaces damaged, dented, or faded outer trim panel on your washer. Restores the clean, factory finish to the appliance front or edge for a complete look.

Replacement rear access panel for your washer. Covers the back of the unit and protects internal components. Order a new panel if yours is cracked or damaged.

Replace your washer's control panel housing case if cracked, broken, or damaged. This protective cover secures and shields internal components.

Replaces damaged or worn control panel fascia on your washer. Restores front appearance and secures control components. Needed when panel is cracked or warped.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix washer control issues, intermittent power, or unresponsive buttons with this multi-connector wiring harness. Restores reliable connections.

This top-load washer lid assembly replaces a damaged or broken lid to restore the washer's ability to close securely and reduce leaks or interference during cycles. It provides a durable cover and proper engagement with the lid switch. What it does:

• Covers the washer tub to retain water and protect clothes during operation
• Provides the mounting surface and engagement for the lid switch so the machine senses closed/open state
• Helps prevent debris from entering the washer and reduces splashing
• Replaces cracked, warped, or non-closing lids that can cause cycle interruptions or error codes

• One complete lid assembly

• Disconnect power to the washer before beginning any work
• Handle the lid carefully to avoid scratching painted surfaces or damaging the lid switch mechanism
• Some models require removal of the control console or hinge fasteners for access—support the lid while removing/installing hardware
• After installation, verify the lid closes securely and that the washer recognizes the closed position before running a full cycle

Secures internal washer components in proper alignment. Replace this mounting bracket if cracked, rusted, broken, or missing to restore stability.

Secures internal components to the washer frame. Replace if your bracket is cracked, rusted, broken, or missing to restore stable support and alignment.

The Power Cord Assembly is an OEM part for LG washing machines. It allows the washer to receive power from the wall outlet during operation. The power cord assembly consists of the wiring that transmits electricity from the power source and into the washer's electrical control panel. 

Causes of a bad power cord assembly can include fraying of the insulation over time, cracks or breaks in the wiring, or loose connections that disrupt the flow of electricity. 

Symptoms of a bad power cord assembly include:

• The washer not receiving power and failing to turn on
• Buzzing or humming noises coming from the power cord area  
• Tripped breakers or blown fuses
• Shock or electrical hazards 

This OEM LG part is also compatible with Sears/Kenmore. Replacing a damaged or defective power cord assembly prevents electrical issues and unsafe conditions. 

This knob assembly is the replacement rotary control used to select settings on the appliance. It restores a worn, cracked, or missing knob to make dialing controls easy and accurate again. What it does:

• Replaces a damaged or missing control knob so you can select cycles, temperatures, or settings
• Provides a secure grip and tactile detents for reliable user control
• Helps stop slipping or loose operation caused by worn knobs or stripped splines
• Restores the appliance's original look and usability

• Turn off and unplug the appliance (or disconnect power) before replacing the knob.
• Pull the old knob straight off the control shaft; push the new knob onto the shaft until it seats.
• If the knob does not fit, do not force it—verify spline alignment and part compatibility.

Fix a washer that won't start, stops mid-cycle, or shows error codes with this main control board. Controls all wash functions and cycles. Pre-programmed.

Molded trim piece that shields and supports the washer guide track assembly. Replace if cracked, broken, or missing to maintain smooth alignment.

Leaking water behind your washer? A cracked inlet hose is often the culprit. This hose channels water from your supply line into the machine during fill.

The PCB Assembly is an OEM part for LG refrigerators. It stands for Printed Circuit Board, which is the main control board that manages and regulates various functions and components within the refrigerator.

Symptoms of a bad PCB Assembly include:

• The refrigerator not powering on or displaying any lights/indicators
• Specific components or features not functioning correctly (ice maker, dispenser, cooling, etc.)
• Error codes or warning lights illuminated on the control panel
• Strange noises or abnormal behavior from the refrigerator

Causes of a bad PCB Assembly can be related to electrical faults, such as short circuits, power surges, or component failures. Physical damage from impact, moisture exposure, or overheating can also contribute to the malfunction of the PCB.

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

The Noise Filter is an OEM part for LG Washers. This part is responsible for reducing electrical noise and interference from the incoming power supply. It filters out unwanted electrical signals and prevents them from affecting the performance of your washing machine. It helps to maintain a stable power supply, minimizing the risk of electrical disruptions during the wash cycle.

A bad Noise Filter can occur due to power surges, electrical faults, or general wear and tear over time. If the noise filter board becomes faulty, you may experience issues such as excessive electrical noise, interference, or even complete power failure.

Symptoms of a bad Noise Filter include:

• Loud electrical buzzing or humming noises during operation.
• Random power fluctuations or interruptions.
• Inconsistent or erratic behavior of the washing machine controls.

If you're experiencing any of these issues, it's time to replace the Noise Filter with this genuine LG part to restore the electrical stability and performance of your washing machine. This OEM LG part can also be used on Kenmore/Sears appliances.
 

Fix detergent leaks or dispenser jams with this washer detergent housing assembly. Routes detergent properly and replaces cracked or warped housings.

Replace a cracked or clogged washer nozzle assembly to restore proper water flow and prevent poor cleaning performance. Moderate DIY repair.

Fix a leaking or cracked fabric softener dispenser with this washer softener cap. Easy DIY repair with no tools needed—just remove and replace in minutes.

Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.

Fix DL error code or washer that won't start with this lid switch and lock assembly. DIY repair in about 20 minutes with basic tools and video guide.

Fix a washer that won't fill, leaks underneath, or drips constantly with this water inlet valve. Controls water flow into the drum. Easy DIY repair.

Fix washer overfilling or not filling issues with a water level pressure switch replacement. Common repair for PE error codes. Takes 10-20 minutes to install.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.