Tractor

This replacement part is a screw. This is a genuine replacement part made by MTD. A screw is a small part but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts in place and secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear or an isolated incident. Screws endure friction over time and can become worn down.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Shield spacer for lawn tractors and riding mowers. Provides proper spacing and alignment for protective shields. Replace if missing, damaged, or worn.

This genuine MTD replacement part is a rocker arm for use with snowblowers, lawn tractors, and other equipment with an engine. A properly functioning rocker arm is essential for the safe and reliable use of the equipment. The rocker arm works to open the intake and exhaust valves. The rocker arm may become worn out or damaged with extended use, necessitating replacement. Remember to check the rocker arm periodically to spot any wear or damage. This part is an identical replacement for a rocker arm that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench set may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down and cool prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Husky, and other equipment. Please note: original part numbers 1843974, 751-11966 is now obsolete, and manufacturer has replaced the original part numbers with this part.

Deck won't stop spinning after disengaging blades? This lawn tractor deck brake assembly stops mower deck rotation for safe operation and blade changes.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This is a shoulder spacer replacement for use with lawn tractors. The shoulder spacer will attach to the deck brake assembly using a hex cap screw. This part can have different applications depending on the type of equipment for which it is being used.The metal spacer is durable, but it could still have some issues. Over time, it could become worn down or corroded and need to be replaced. It could also be lost when working on other parts of the machine and need to be replaced. The repair should be done with gloves so owners can protect their hands.The shoulder spacer is a replacement for select models of lawn tractors from Husky, Troy-Bilt, and MTD. This is a genuine OEM replacement part that has been sourced directly from the manufacturer. The spacer is sold individually.

Replace the steering tie rod on your lawn tractor. This rod connects steering components and requires replacement when bent, damaged, or worn.

Fix a deck that won't lift or adjust properly. This pivot cup lets the lift arm move freely while staying secured to your mower deck. Easy DIY fix.

If your lawn tractor won't steer properly or feels loose, this drag link connects the steering wheel to the front axle. Straightforward repair.

This valve kit is a genuine MTD part, sold individually. This valve kit can be used as a replacement part for a snowblower. The valve kit comes with all of the components necessary to replace the valves of a snowblower. The valve kit comes with a metal needle, a spring clip, and a plastic seal. The valves on a snowblower provide a safe passageway for the fuel to reach the carburetor.Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This valve kit is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, Cub Cadet, Yard Machines, Huskee, and Yard Man.

This is a replacement ex. valve spring retainer for use with snow blowers, lawnmowers, and log splitters. The function of a valve retainer is to fit on top of a valve spring and to keep it in place. This seal ensures that there is no oil leaking into the combustion chamber of the engine. Signs that the valve could be bad or going bad include misfiring, ticking sounds, and compression loss.The metal retainers are built to last, but they could fail over time. They could crack or break, which would affect the performance of the machine. This could eventually cause damage to the engine if it is not replaced.The ex. valve spring retainer This is compatible with a range of models of yard equipment from MTD, Yard Machines, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. This is a genuine OEM replacement part that has been sourced from the manufacturer. It is sold individually.

Removes contaminants from engine oil to protect internal parts. Replace regularly to maintain engine performance. Confirm fit with your model number.

Engine won't crank or clicks when you turn the key? Replace the starter solenoid to restore reliable starting. Fits most lawn tractors and riders.

The exhaust systems on lawn and garden equipment are just as important as those on a vehicle. They need a good seal to prevent a leak between the carburetor and the exhaust tube, which would allow air leakage that could cause performance issues and loud noise. Over time all exhaust gaskets deteriorate and require a full replacement. It is relatively easy to replace an exhaust gasket and requires only the use of screw drivers, a socket set or a wrench set depending on the device being service. Replacement components such as sockets or screws may also be required during this repair. The gasket surfaces should be cleaned and fully dried before being installed between the carburetor and the exhaust tube. This exhaust gasket works with Toro, Simplicity, Murray and Briggs & Stratton lawnmowers, generators, snowblowers, wood chippers, and lawn tractors. It also works with equipment made by Craftsman, Husqvarna, Cub Cadet, Poulan, Wheel Horse, MTD, Ariens, and more.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.