Tractor

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

Engine won't start after sudden stop? A sheared flywheel key breaks the connection between crankshaft and flywheel. Simple DIY repair.

Creates a leak-proof seal between the fuel drain plug and tank. Replace if you notice fuel leaking from the drain area. Verify fit with your model number.

Seals the engine sump to prevent oil leaks in lawn mowers and snow blowers. Replace if you notice oil pooling or leaking. Verify fit with your model number.

Engine won't crank or turns slowly? This starter assembly restores reliable starting on lawn tractors and riding mowers. Direct-fit replacement part.

Replace a damaged starter front cover if your engine won't start or cranks poorly. Fits directly over the starter assembly for secure protection.

This charging coil assembly generates electrical power for your lawn mower's battery and ignition system. It converts engine rotation into electrical energy to keep the battery charged and power electrical components. Replace this assembly when your mower battery won't stay charged, the engine fails to start electrically, or charging system warning lights appear.

This voltage regulator controls the electrical output from the engine's charging system, ensuring a consistent voltage is supplied to the battery and electrical components. It prevents overcharging or undercharging of the battery. Replace this part if the battery repeatedly dies, overcharges, or if electrical components behave erratically during operation.

Seals the exhaust pipe connection on lawn tractor and walk-behind mower engines. Replace when exhaust leaks occur or during engine maintenance. Verify fit with your engine model number before ordering.

Seals the cylinder head to prevent oil and compression leaks in lawn mower engines. Replace if you notice oil seepage or loss of power. Verify fit with your model number.

Lawn mower won't stay running or struggles to start? This carburetor assembly regulates air and fuel mixture to your engine for reliable performance.

Engine won't shut off or runs after ignition is turned off? This fuel shut off solenoid valve kit controls fuel flow. Includes gaskets for install.

This is a genuine OEM carburetor rebuild kit sourced directly from the manufacturer and is intended for use with lawn tractors. This rebuild kit saves money when the carburetor is not working up to its full potential. If the carburetor is clogged, it won't get enough fuel and the engine won't run efficiently. The carburetor creates the air and fuel mixture that causes the cylinders to ignite and run the engine. If any of the seals or gaskets are worn and fuel leaks from the carburetor or air gets inside, the ratio of fuel to air will be off and the engine may sputter or not run at all. Before rebuilding the carburetor, you can test it to determine if it needs to be repaired or if there are other potential issues. First, remove the air filter from the lawn tractor and pour a little gas directly into the carburetor. Start the engine. If the engine dies quickly after starting, the carburetor should be rebuilt. This kit contains all the gaskets and o-rings needed to rebuild the carburetor. Make sure there is no fuel in the engine when you work on the carburetor.This kit is made to be compatible with lawn tractor engines manufactured by Yard Machines, MTD, Cub Cadet, Husky, Yard-Man, and Troy Bilt. It is sold as an individual unit.

Engine pulley holds belts and transfers power for cutting. Replace if damaged, worn, or causing reduced mower performance. Verify fit with your model.

Replacement seat for lawn tractors and riding mowers. Low-back design installs on operator platform. Needed when original seat is cracked, worn, or broken.

Replace a bent, cracked, or broken steering arm on your lawn tractor. This linkage part connects the steering wheel to the front wheels for directional control.