Trimmer

This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a genuine replacement chainsaw chain. Using a chain rather than a saw blade ensures that the tool lasts longer, cuts cleaner, and requires less sharpening and care than a blade would. The chain on a chainsaw can be easily taken off and replaced by this part to make the chainsaw work smoothly and efficiently. If the old chain is rusted or not cutting well, a replacement is needed for the chainsaw.To replace the chain, first, make sure that the machine is off and unplugged. Wear gloves when working, as the chain may be sharp. Bolts on the chainsaw will need to be loosened to release tension in the chain, and then the chain can be removed from the bar. The new replacement chain can then be added to the bar and screwed back in.This OEM replacement part is sourced directly from the manufacturer. It is sold individually. It is manufactured from Troy-Bilt and for use for any Troy-Bilt chainsaw.

This genuine replacement part is a MTD 8” bar for use with chainsaws.This chain bar is for use with chainsaw attachments. It is used to provide a seat for the chain. It is responsible for guiding the movement of the chain, the chainsaw's cutting element. A properly functioning chain bar is essential for the safe and reliable use of a chainsaw. The chain bar may become worn out or damaged due to extended use, and will require replacement. Wear on the guide bar is usually most severe on the underside of the bar. Remember to check the bar periodically to spot any wear or damage. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench or allen key may be needed for installation of this part. Please note: For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt and Cub Cadet chainsaws.

Trimmer head not spinning or making grinding noises? This gear box assembly transfers power from the engine to the cutting head. Moderate DIY repair.

Carburetor assembly for gas leaf blowers. Mounts between engine and fuel system to regulate air-fuel mixture. Replace if cracked, leaking, or worn.

Engine won't start or starter spins freely? This pawl assembly locks onto the flywheel during starting. Fits gas leaf blowers and line trimmers.

Plastic flex tube for gas leaf blowers. Connects engine components for airflow. Replace if cracked, split, or worn from extended use.

This genuine replacement part is a fuel tank assembly for use with a blower, leaf blower, or vacuum. It is also known as a fuel tank.This part is the fuel tank used to hold fuel in the leaf blower. The fuel tank assembly includes the fuel tank, fuel cap and the fuel lines. It is essential for safe and reliable use of the blower. Through extended use, this part may become worn out, cracked, or damaged. This can lead to a fuel leak, which can cause unsafe operating conditions. It is recommended to check the fuel tank periodically for any cracks or wear. Before working with this part, drain the gas tank into an approved storage container in a well-ventilated area. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Craftsman, MTD, and Troy-Bilt, Yard Man, and more blowers.

This replacement part is an insulator gasket. Insulator gaskets isolate the metal surfaces of a flanged joint, electrically insulating them.A new insulator gasket might be needed if the current one is damaged in any way. If the engine struggles to turn on or does not start at all, it might be due to a damaged or malfunctioning insulator gasket. When replacing this part, be sure that the engine is completely powered off and cooled down.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

Drive shaft housing assembly for gas line trimmers. Connects the power source to the trimmer head. Replace if cracked, bent, or damaged. Metal shaft housing.

This part is a replacement air cleaner assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken, worn, or defective air cleaner assembly on various models of blowers. This air cleaner assembly includes the base, cover, and the foam air filter itself. This part helps to make sure that dirt, debris, and contaminants are filtered out of the air as it enters the engine so it doesn't have a negative effect on the equipment. Air filters should be cleaned regularly and replaced when worn or old. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this air filter assembly, the appropriate owner's manual and equipment diagrams should be referenced. This air filter assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with blower models that have been manufactured by MTD and Craftsman.

Engine gasket for gas leaf blowers. Ensures proper engine seal and smooth operation. Replace if damaged or leaking to prevent performance issues.

This electronic component generates the spark needed to ignite the fuel mixture in the leaf blower's engine, typically mounted near the spark plug. Replace when the engine fails to start, runs roughly, or stalls frequently despite proper fuel and air flow.

This impeller can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of an impeller, which operates by rotation, is to take in the leaves and eject them out of the chute.An impeller might have to be replaced if it suffers damage that impedes it from properly ejecting the leaves from the chute. A common symptom of an impeller that needs to be replaced is that the leaves are not ejected with enough force from the chute or that the ejection process stalls or does not occur at all. If this is the case, the impeller should be removed and replaced with this genuine OEM replacement part immediately before using the leaf blower or leaf vacuum again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD, and it is sold individually. This impeller is compatible with the following brands: MTD, Troy-Bilt, and Yard Man.

If your leaf blower won't accelerate or speed is stuck, the throttle cable may be damaged. This cable regulates engine speed for precise control.