Parts for Lg T1772HFFSTD: Tub Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Standard bolt for securing washer panels, brackets, and internal components. Replace when bolt is stripped, missing, or damaged to restore proper fit.

Washer gasket creates a watertight seal to prevent leaks. Replace if you notice water pooling or dripping during cycles. Confirm fit with your model.

Washer water guide directs water flow during fill and rinse cycles. Replace this plastic guide if cracked, broken, or missing to restore proper alignment.

The washer pulsator is located at the bottom center of top-loading washing machines and creates the agitating motion that cleans clothes. Replace if clothes aren't getting clean, the pulsator is cracked or loose, or you notice reduced agitation during wash cycles.

This is a heating element housed within a metal assembly that mounts inside the washer's tub or sump area. It heats the wash water to the selected temperature during wash and rinse cycles, particularly for steam or sanitize settings. Replace this assembly if your washer fails to heat the water, displays a heating error code, or clothes are not coming out clean due to cold wash temperatures.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This shock absorber dampens vibrations and movement of the wash tub during the spin cycle. It connects between the outer tub and the base frame to keep the tub stable and reduce excessive shaking. Replace this part if the washer vibrates excessively, makes loud banging noises during spin, or walks across the floor during operation.

Suspension rod kit for washing machines. Replaces worn, broken, or damaged rods that stabilize the drum. Includes 4 rods for complete suspension system.

Tapping screw secures washer panels, brackets, and trim in place. Replace stripped, rusted, or missing screws to restore proper fit and stability.

Kit is no longer available. Order MCJ61861201 and ACP72929002 separately.

Small metal washer used in washer internal mounting assemblies. Provides proper spacing between components and secures fasteners. Replace if worn or missing.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

Replacement nut that secures drawer and trim components on compatible LG appliances. It restores a firm, vibration-resistant fastening to help prevent loosening, rattling, or misalignment during normal use. What it does:

• Secures drawer, trim or small mounting brackets to the appliance chassis.
• Helps stop loosened fasteners that cause rattling or misaligned panels.
• Provides proper thread engagement for a stable connection.
• Matches the appliance's original fastening point when used as the listed part.

• Always disconnect power to the appliance before beginning any repair.
• Use the correct-size wrench or socket; avoid overtightening to prevent stripped threads.
• Inspect mating screw/bolt and threads for damage; replace damaged hardware as needed.

Genuine hardware washer that distributes fastener load at assembly joints. Replace if worn, cracked, or causing loose connections. Confirm fit with your model.

Hardware washer that sits beneath screws or nuts to distribute load and secure fasteners. Replace if bent, missing, or worn to restore proper fit.

Fix LE error code or washer won't spin issues with this stator assembly. Common repair for motor lock problems. DIY-friendly, typically installed in 30 minutes.

The Clutch Motor is an OEM part for LG washing machines. This motor engages the clutch mechanism, allowing the washer to switch between agitating and spinning cycles effectively.

Causes of a bad clutch motor can include wear and tear over time, electrical issues, or mechanical failure due to overloading or improper use.

Symptoms of a bad clutch motor include:

• The washer not agitating or spinning
• Unusual noises during the wash or spin cycles
• The drum not rotating properly
• The washer stopping mid-cycle

This OEM LG part is also compatible with Sears/Kenmore models.

The Coupling Washer is a genuine OEM part for LG washing machines. As a crucial component connecting the drive motor to the inner drum, the coupling washer allows for the transmission of rotational force during the spin cycle. This rotational movement generated by the drive motor is what extracts water from clothing, effectively drying clothes. 

Symptoms of a bad coupling washer include:

• The washing machine fails to spin or rotates very slowly
• Vibrations and noise during spinning
• Rubber couplings tearing or shredding prematurely

Over time, the constant exposure to vibrations and forces during spin cycles can cause the rubber material of the coupling washer to deteriorate. 

This OEM LG part is also compatible with Sears/Kenmore washers.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

Connects the washer tub to the drain pump. Replace this hose if cracked, split, leaking, or worn from age. Ensures proper water drainage during cycles.

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

Fix washer won't agitate or makes grinding noise. This pulsator assembly restores proper wash action. Moderately challenging DIY repair with video guide.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.