Parts for Electrolux EFLW427UIW1: Tubb Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Mounting screw for washer assembly. Secures internal components and panels. Replace if screw is stripped, missing, or no longer holding parts firmly.

Fix a washer door that won't stay open or closes unevenly with this counterweight. Restores proper balance for smooth door operation on front-load models.

This replacement spring restores the correct tension in the affected mechanism on your appliance, helping parts return smoothly and stay aligned. A fatigued or broken spring can cause loose action, noise, or improper engagement—this fixes it fast. What it does

• Provides return tension to the related mechanism so parts move and reset correctly
• Helps maintain alignment and reduces looseness or rattle during operation
• Supports smooth engagement/disengagement of linked components
• Common symptoms: weak/loose action, parts not returning to position, squeaking/rattling, visible break or deformation

• 1 spring

• Disconnect power; for gas appliances, shut off gas. For washers, also turn off water supply.
• Support the component under spring tension before removal to prevent sudden release.
• Note or photograph original routing and anchor points to match orientation on reassembly.
• Inspect related brackets/clips; replace any that are bent, worn, or corroded.

This is a Belleville-style spring steel washer used in the suspension or counterweight mounting system of a washing machine. It acts as a spacer and provides spring tension to help absorb vibration during the spin cycle. Replace this washer if the machine vibrates excessively, makes banging noises, or if the original washer is flattened, cracked, or missing.

Replacement outer shell housing for washers. Restores the appliance's exterior when the original is cracked, damaged, or missing. Secures internal parts.

Replacement suspension spring for washer tub assemblies. Installs to dampen vibrations and absorb movement. Order if your spring is broken, worn, or missing.

Hex washer head screw secures panels, brackets, and drum assemblies in washers. Replace rusted, stripped, or missing screws to prevent rattling.

This is the inner spin basket (drum) that holds clothes during the wash and spin cycles. It rotates at high speed to extract water from laundry and includes the vane fins inside the drum. Replace this assembly if you notice excessive vibration, visible cracks or holes in the basket, or if clothes are getting snagged or damaged during washing.

Plastic baffle (vane) that attaches inside the washer drum to lift and tumble clothes during wash cycles. Replace if cracked, broken, or detached.

If your washer won't start, agitate, or spin, the drive motor may have failed. This motor powers both wash and spin cycles. Test windings with a multimeter.

Secures the motor housing to its mounting bracket in washers and laundry centers. Replace if screw is missing, stripped, or damaged during service.

This is a rubber seal that fits between the tub shell components of a washing machine, preventing water from leaking out during wash and spin cycles. It creates a watertight barrier that keeps water contained within the outer tub assembly. Replace this seal if you notice water leaking from underneath or around the washer tub, or if the existing seal is cracked, warped, or deteriorated.

This rear drum assembly houses the washer's main wash basket and includes the bearing system for smooth rotation. It supports the weight of clothes and water while allowing the basket to spin freely during wash and spin cycles. Replace this component if your washer makes loud grinding noises, won't spin, or if the drum feels loose or wobbles excessively.

Washer not spinning or draining properly? A worn drive belt often causes poor spin performance. This belt connects motor to drum. 30-minute DIY repair.

Fix a washer that won't spin or makes grinding noises with this drive pulley assembly. Powers the belt system for proper drum rotation and agitation.

The Bolt is an OEM replacement part for Frigidaire washing machines. Internally installed, these fasteners securely hold internal components like the tub, transmission, and agitator in the proper position. 

Causes of bolt failures can include wear and corrosion from repeated vibrations during spin cycles compounding over many years of use. 

Symptoms of bad bolts include: 

• Loose, wobbly, or misaligned internal components    
• Grinding noises or strange vibrations occurring  
• Leaks developing from compromised tub seals

Compatible brands include Frigidaire, Electrolux, KitchenAid, Jenn-Air, and select Kenmore models for lasting reliability.

Shock absorber for front-load washers. Reduces vibration and absorbs movement during cycles. Replace if worn, damaged, or causing excessive shaking.

Replacement shock absorber for front-load washers. Mounts between drum and base to dampen vibration. Replace if cracked, leaking, or worn out.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Secures the shock absorber to the outer tub in your washer. Replace if the pin is broken, cracked, or missing to restore proper shock mounting.

Mounting bracket secures components inside your laundry center. Replace if bent, broken, or missing to eliminate rattling and restore stability.

Washer won't drain or leaves clothes soaking wet? A faulty drain pump prevents water removal after wash cycles. Direct-fit replacement, moderate DIY.

Washer leaking or not filling? This water valve diaphragm forms a watertight seal to control flow and prevent leaks. Simple repair restores proper operation.

Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.

This air chamber directs and channels cold air inside the appliance to help maintain even temperatures. Replacing a damaged or cracked air chamber restores proper airflow for more consistent cooling and performance. What it does:

• Channels conditioned air from the evaporator into the cabinet to help even temperature distribution
• Prevents air leaks and redirects airflow to the correct compartments
• Can cause uneven cooling, warm spots, or frost buildup when cracked or broken
• Works with fans and ducts to maintain proper airflow balance

• One air chamber assembly

• Disconnect power to the appliance before beginning service
• Remove interior panels or shelves as needed to access the chamber; handle plastic tabs and clips carefully to avoid breakage
• Inspect adjoining ducts, seals, and mounting tabs; replace any damaged components to ensure a proper seal

This air chamber directs and channels cold air inside the appliance to help maintain even temperatures. Replacing a damaged or cracked air chamber restores proper airflow for more consistent cooling and performance. What it does:

• Channels conditioned air from the evaporator into the cabinet to help even temperature distribution
• Prevents air leaks and redirects airflow to the correct compartments
• Can cause uneven cooling, warm spots, or frost buildup when cracked or broken
• Works with fans and ducts to maintain proper airflow balance

• One air chamber assembly

• Disconnect power to the appliance before beginning service
• Remove interior panels or shelves as needed to access the chamber; handle plastic tabs and clips carefully to avoid breakage
• Inspect adjoining ducts, seals, and mounting tabs; replace any damaged components to ensure a proper seal

Washer hose clamp secures water inlet and drain hoses to prevent leaks. Replace if loose, cracked, or causing water drips. Verify fit with your model number.

Secures interior trim and components in your laundry center to prevent rattling and shifting. Replace when worn or broken to restore a snug fit. Verify compatibility with your model number.

Secures hoses and boots to pumps and tubs, preventing leaks. Replace if damaged, rusted, or unable to tighten. Confirm fit with your model number.

Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.

Tub ring that secures and seals between the outer tub and basket assembly. Replace if cracked, broken, or worn to restore proper tub alignment.

Drain hose that carries water from the washer tub to your drain during cycles. Replace if cracked, split, leaking, or damaged to prevent water spillage.

Cable tie secures wiring bundles and hoses inside your laundry center. Prevents loose routing, rubbing, and rattling noises. Replace if broken or missing.

Drain hose that carries water from the washer tub to your drain during cycles. Replace if cracked, split, leaking, or damaged to prevent water spillage.

Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.

Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.

Cushion bumper for washer installation. Absorbs vibration and protects cabinet surfaces. Replace if cracked, compressed, or missing to restore proper support.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.