Need Help?
Call or text
Show parts
The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth. Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes. As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces
This part is discontinued by the manufacturer and is no longer available for purchase.
Usually ships within 4 - 14 days
Dishwasher middle wash arm manifold tube holder. This holder will have a split at the 3:00 position for easy removal from the manifold tube.
This is the dishwasher manifold tube only. It attaches to the bottom of the upper rack. For the complete kit order 675808. Also consider checking the mount that attaches this manifold tube to the dishrack. For the mount order WP8539324.
The Ring Bearing is an OEM part for Whirlpool dishwashers. It is a critical component that supports the rotation of the dishwasher's spray arm, ensuring it can spin freely to distribute water evenly throughout the dishwasher for effective cleaning.
You should replace the ring bearing if it becomes worn out, cracked, or damaged. Causes of a bad ring bearing can include general wear and tear from regular use, accumulation of debris or mineral deposits, and damage from improperly loaded dishes.
Symptoms of a bad ring bearing include:
This OEM part is also compatible with certain models of Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.
The Spray Arm and Supply Tube Kit is an OEM replacement part for Whirlpool and KitchenAid dishwashers. This kit restores two key cleaning mechanisms by replacing lower spray arms as well as its feed tubes.
This kit includes:
Causes of failure can include mineral deposits clogging small jet openings plus years of constant high-pressure water exposure creating small fractures in rigid plastic arms.
Symptoms of a failed spray system include:
This OEM replacement part is compatible with Maytag, Jenn-Air and Amana models as well.
The Upper Spray Arm Mount is an OEM part for Whirlpool dishwashers. This component serves as a crucial connection point between the upper spray arm and the water supply tube within the dishwasher. The mount is designed to ensure the spray arm is securely attached and positioned correctly to distribute water evenly throughout the dishwasher during cycles.
Symptoms of a bad Upper Spray Arm Mount include:
Causes of a bad upper spray arm mount can include mechanical stress from the rotation and water pressure, material fatigue over time, or damage from impact during loading and unloading of dishes.
This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
PLEASE NOTE: Shaft is angled to match the bottom side of rack and mounts directly to the rack. On older design models part number WP8268812 will no longer be used.
This is an upper spray arm mount that is a part of many types of dishwashers. The upper spray arm mount attaches the water supply manifold to the spray arm. This ensures that the water moves from the manifold into the spray arm so it can be used to spray water across dishes during a cycle. If the upper spray arm mount becomes damaged or cracked, it can cause the upper spray arm to fall off. This could create additional damage so the upper spray arm mount should be replaced.If the upper spray arm mount needs to be replaced, it can be done with the help of a 5/16-inch screwdriver. First, make sure the dishwasher is unplugged and the water supply has been turned off. Open up the door to the dishwasher and locate the upper spray arm. The mount will be attached to it. Use the screwdriver to remove it and install the new part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The upper spray arm mount is made to be compatible with dishwashers manufactured by Inglis, Kenmore, KitchenAid, and Whirlpool.
The Screw is an OEM part for Whirlpool dishwashers. It secures the spray arm to the dishwasher, ensuring it rotates properly to distribute water evenly throughout the dishwasher during cleaning cycles.
Common causes of a faulty spray arm screw include wear and tear from regular use, corrosion from exposure to water and detergents, or damage from improper installation or removal.
Symptoms of a bad spray arm screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes.
Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles.
Symptoms of a bad upper dishrack rail include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Comes with axle clip.
This genuine OEM part is a refrigerator upper dishrack. The upper dishrack is the tray on which dishes are placed on the top shelf of a dishwasher. If the dishrack is no longer sliding on its tracks, or is not staying in place during the wash cycle, it might need to be replaced. Luckily this is a very simple repair.To replace the upper dishrack, simply pull out the old dish rack and lift it up out of its tracks. Once removed from the dishwasher, take the new dishrack and gently slide it into place. Make sure it is placed correctly and that it is running smoothly on its tracks.This replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dishwashers.
Notes: Only one screw hole is used now.
A threaded screw used to secure appliance components where an 8-16 thread is specified. Provides a straightforward replacement fastener to restore original fit and keep panels, brackets, and internal parts held securely. What it does: