Parts for Kitchenaid KBSD606ESS01: 14 - Upper Unit Parts

Fix refrigerator cooling issues with an inverter control box replacement. Regulates compressor speed and energy efficiency. Moderate electrical repair.

Rubber grommet kit that mounts and cushions the compressor. Replace worn, cracked, or damaged grommets to restore proper support and isolation.

Replacement housing for your refrigerator. Protects internal components and maintains proper appearance. Order now if your original is cracked or damaged.

Fix a refrigerator that won't cool, clicks repeatedly, or has a blank display by replacing the main electronic control board. Moderately difficult repair.

Rubber grommet kit that mounts and cushions the compressor. Replace worn, cracked, or damaged grommets to restore proper support and isolation.

Mounting plate for refrigerator assembly. Installs to secure internal components. Replace if cracked, broken, or missing to restore proper fitment.

Mounting plate for refrigerator interior components. Replace if cracked, broken, or warped. Secures parts in proper position inside your fridge.

Protects the terminal block on your refrigerator compressor by shielding electrical connections. Replace if cracked, broken, or missing for safety.

Fixes refrigerator that won't cool, has unresponsive controls, or displays error codes. Main control board manages all refrigerator functions and cycles.

Plastic spacer that mounts between refrigerator door panels or hinges. Replace if cracked, broken, or missing to restore proper door alignment.

Mounting bracket that secures the inverter box inside your refrigerator. Replace if cracked, bent, or missing to properly support the inverter assembly.

Jumper wire for refrigerators. Installs in the electrical system to complete circuit connections. Replace if damaged, corroded, or missing.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Fix a refrigerator that won't cool or runs constantly with this condenser coil assembly. Restores efficient heat transfer and reduces compressor runtime.

Mounting plate for side-by-side refrigerators. Secures internal components in place. Replace if cracked, warped, or broken to restore proper fit.

Mounting plate for side-by-side refrigerators. Secures components in place. Replace if cracked, broken, or missing to restore proper fitment.

Fixes refrigerator displays flashing, unit cycling on/off, or fans not running. This power supply board converts AC to DC for controls and components.

Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.

Mounting bracket for refrigerator interior components. Replaces broken, cracked, or missing brackets that secure shelves or bins in place.

Fix a refrigerator that's not cooling properly with this condenser fan motor. Replaces worn motors causing poor heat exchange. Video guide included.

Fix clicking noise, poor cooling, or overheating compressor by replacing a cracked or warped condenser fan blade. Restores airflow across the coil.

Replace a faulty water dispenser orifice if water flow is restricted or dripping. This small precision part controls water flow rate in your refrigerator.

Refrigerator won't restart after power outage or showing PF error? This power control board regulates compressor and cooling fans. DIY install in 50 minutes.

This is a replacement mounting screw used to secure appliance panels and small components. It provides a correct-fit fastener to restore secure attachment and eliminate rattles or loose parts. What it does:

• Secures trim, panels, brackets, or small assemblies to prevent movement and vibration
• Restores proper alignment when a worn or missing screw causes loose parts or noise
• Works as a direct-replacement fastener where the OEM screw specification is required

• One replacement screw

• Use the correct driver bit to avoid stripping the head; do not overtighten
• Disconnect power and follow appliance safety guidelines when accessing internal components
• If the original mounting hole or threads are damaged, repair or replace the mounting hardware before reinstalling

Wire harness for side-by-side refrigerators. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections fail.

Rubber grommet for refrigerator doors, shelves, or water lines. Replace if cracked, torn, loose, or missing to restore proper fit and seal.

Refrigerator won't turn on or stays running constantly? This power disconnect switch controls main power to your unit. Easy DIY replacement fix.

This replacement water fill tube routes water to the appliance's dispenser/ice system so you get proper fill and reduced leaks. It restores reliable water delivery when the original tube is cracked or clogged. What it does:

• Directs water from the supply to the dispenser or ice/water mechanism
• Prevents leaks when intact and properly secured
• Helps ensure consistent water flow for ice makers and dispensers
• Worn or damaged tubes can cause pooling, low water delivery, or intermittent filling

• One replacement water fill tube

• Turn off the appliance power and water supply before starting work
• Inspect fittings and seals; replace clamps or gaskets if worn
• Slide tube into place and secure with the original or new clamps for a leak-free connection

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Replacement cover panel for refrigerators. Installs on exterior or interior surfaces. Order when original is cracked, broken, or missing.

Replacement power cord for refrigerators. Connects appliance to wall outlet. Needed when original cord is damaged, frayed, or worn from use.

Mounting bracket for refrigerator internal components. Replace if your original bracket is cracked, broken, bent, or missing to restore proper support.

Replace a cracked, kinked, or leaking water dispenser tube in your refrigerator. Installs between the water supply and dispenser assembly. Essential when tube is damaged or worn.

Seals openings where hoses or wires pass through cabinet walls. Replace if cracked, torn, or missing to prevent chafing and vibration noise. Verify fit.

Size: 1/2 inch.

Size: 5/8 inch.

Size: 3/4 inch.

Size: 5/16 inch.

Size: 3/8 inch.

Size: 3/16 inch.

Size: 1/4 inch.