Weedeater String Trimmer Parts

This is a replacement leaf blower tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective leaf blower tube on a variety of different leaf blower models. This tube makes up part of the vacuum attachment assembly. It links the vacuum bag directly to the lower tube. This part can become worn with regular use and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this mulcher kit, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this leaf blower tube is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This authentic OEM part is a replacement foam air filter for a gas-powered leaf blower. For a gas-powered engine to work, it must maintain a balance of fuel and oxygen. This means it is constantly taking in air from outside the engine. However, working in dusty areas can cause a lot of debris to mix with the air. A foam air filter helps to catch that debris before it can clog up an engine. After an extended period of use, though, the filter will become clogged. Replacing a foam air filter is an easy repair that will only require a screwdriver. Remove the air filter cover, take out the old filter, and put in the new filter. This part works with gas-powered leaf blowers from Poulan, Weed Eater, and Husqvarna and is sourced directly from the original manufacturer. It ships individually.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This is a replacement fixed line cutting head. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken, worn, or defective fixed line cutting head on various trimmer models. The cutting head cuts through weeds, plants, and grass. Due to the amount of contact this part has with the ground, rough surfaces, and debris, it can easily become worn and require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. For more accurate information on how and where to install this fixed line cutting head, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fixed line cutting head is suitable for use on several different models of string trimmers manufactured by Husqvarna, WeedEater, and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a drive shaft assembly kit that is intended for use with gas-powered trimmers. This driveshaft assembly kit is identical to the one that was installed on the original unit. This part helps rotate the cutting head so that the trimmer can cut grass and weeds. A new drive shaft assembly kit may be needed if the original is cracked, broken, or damaged in any way. Additional signs that a new drive shaft assembly kit will be needed are if the trimmer head does not turn or if the trimmer is vibrating excessively. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This drive shaft assembly kit is a genuine OEM Husqvarna part. It is sold individually. This specific drive shaft assembly kit is compatible with gas-powered trimmers that are manufactured by the Husqvarna brand and the Weed Eater brand.

This is a genuine replacement ignition module for select Husqvarna lawn and garden equipment engines. The ignition module, also known as the armature-magneto, creates high voltage power in pulses, which then passes on to the spark plugs and allows them to create the spark to fire the engine. This part consists of the ignition coil and the spark plug boot, which is made with durable rubber and insulated metal. When the various components fail, the engine may not get the spark that it needs to turn over because the spark plug is not getting the power. A replacement will get the equipment running again. This OEM replacement part is designed for use on gas-powered blowers and string trimmers, including select models from Husqvarna, Poulan, Weed Eater, and Jonsered. The ignition module comes as a complete part and includes the boot assembly and coil, so no additional purchases will be required. Hardware is not included, however, and will need to be bought separately when it is needed. This unit is sold individually. The engine should be cool before doing any repairs and gloves should always be worn to protect the hands during engine repairs and parts replacements.

This foam air filter will work with certain models of trimmer. The air filter is an important part of the trimmer. It is used to make sure that dust and debris from the air supplied to the unit don't get into the machine and cause problems. If there is no filter, it could damage the trimmer. Check the filter regularly to see if it might need to be replaced.The foam air filter on the trimmer will need to be replaced regularly to ensure the machine is performing optimally. Over time, the material can clog the filter, which will reduce proper airflow in the machine. Replace the filter if they notice that it is dirty and clogged. Replacement is fast and easy.The filter will work with select models of trimmers from Weed Eater and Husqvarna. This piece is sold individually. Owners might want to consider having several of them on hand for replacements. This is a genuine OEM replacement filter that was sourced from the manufacturer.

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

This is a carburetor adapter. If this part is broken or deteriorated the carburetor may not function as efficiently, potentially causing the engine to misfire or reducing engine performance. In an internal combustion engine the carburetor is responsible for sending a combination of fuel and air to the motor for ignition. This carburetor adapter fits between the cylinder and carburetor to improve the functionality of the carburetor and, ultimately, the performance of the engine. This part is manufactured from high-quality and durable plastic. This carburetor adapter is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor adapter fits various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This is a gear set kit that is designed for use with many edgers for the lawn and garden. The gear set kit comes with various components that can be used as replacements when the gearbox is experiencing issues in the trimmer. In some cases, the durable metal gears can undergo wear and tear or become damaged. If the gears have worn, they may not make contact with other components, and the edger will not start or run properly. If this is occurring, the gear set kit can be used to replace the parts.A socket set and a small bearing puller are both useful for making the replacement on an edger. The blade will need to be removed, followed by the gear cover. Take out the bolt that holds the clutch hub and drive gear together. Remove these from the case and pull the bearings off. At this point, the old drive gear can be replaced with components from the kit.This kit is sold as a single unit. It is an authentic OEM replacement kit that is sourced directly from the manufacturer. The gear set kit is made to be compatible with a selection of edgers from Weed Eater and Craftsman.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This is a starter pulley that is used with various types of string trimmers from major manufacturers.The pulley keeps the starter rope in the right location so that the chainsaw comes on and offers cutting power. Through wear and tear or impact, the starter pulley can break or become damaged.If a user pulls the starter rope and the engine does not start, the starter pulley may not be working correctly. It will need to be replaced. Before the replacement is made, make sure the tool is turned off and the spark plug wire is disconnected. The starter pulley and rope can be reached by disassembling the trimmer. The recoil spring should be rewound before the rope is threaded back in.This starter pulley is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is made for use with string trimmers manufactured by Turf King, Craftsman, Paramount, Weed Eater, Poulan, and Poulan Pro.

This hub is a genuine Husqvarna replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The hub is a crucial piece of a lawn trimmer that turns the string with enough force to cut through plant material. The hub contains the string that is unspooled when the engine is running and a cap with piercings through which the string is unspooled. A lawn trimmer hub might have to be replaced if an incompatible string is used on the lawn trimmer, such as a heavier string that cannot be properly spooled and unspooled by the hub. Additionally, a hub might have to be replaced from general overuse or long-term use. To remove and replace the hub, one will need a Phillips screwdriver, a flathead screwdriver, and an adjustable wrench. If the hub is damaged to the point that the lawn trimmer is unusable, the hub should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This hub is compatible with the following brands: Husqvarna, Poulan, and Weed Eater. This part sold individually.

This part is a muffler that is used on riding lawn mowers and lawn tractors. The purpose of a muffler is to reduce the noise that comes from the engine's exhaust. This muffler is manufactured out of high-quality, durable metal. The hardware to secure the muffler is sold separately.A new muffler may be needed if the original wears out. The muffler can also get clogged and require a replacement in order to operate at its best. Make sure to allow the muffler and engine to cool completely prior to attempting to do any repairs or replacements. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This muffler is a genuine Husqvarna part. It is sold individually. This particular muffler is compatible with riding lawn mowers and lawn tractors that are manufactured by Husqvarna, Weed Eater, Poulan, and Jonsered.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are commonly found in many appliances and assist in connecting certain parts so that the appliance is able to run smoothly. A new spring might be needed if the current one is stripped down or is no longer functioning properly. This can be due to normal wear and tear after years of use. Due to the nature of certain springs, these parts can snap under pressure and should be replaced if this is the case. Work gloves are recommended when replacing this part as this spring is often found close to other dangerous parts. This specific spring is sold individually and is sourced directly from the manufacturer for long-lasting use. This part is a genuine OEM replacement part to ensure proper fit.