Need Help?
Call or text
Oven not heating evenly or convection mode not working? This rear convection element restores even baking and roasting. 20-minute DIY repair.
Whirlpool convection oven. Access to convection element from inside. Three screws to remove plate covering fan blade. Then one screw to remove element bracket. I placed tape over the holes with the wires so they wouldn’t pull back into the panel. Remove old element at tabs and replace. Very easy fix. Removing door to oven made it easier to get to but not necessary. Read more
If your oven won't heat or bakes unevenly, the bake element may be burned out. This lower heating element is a straightforward DIY fix in under an hour.
Daughter cleaned oven and replaced new element with little difficulty. However, with first use it wouldn't shut off. Cleaned the sensor and now works fine. Easy to replace burner. Read more
Oven not heating or baking unevenly? The bake element provides bottom heat for baking and roasting. Easy DIY repair when coils deteriorate from heat cycling.
A replacement baking element - easy to replace. Read more
Broil element not heating or sparking? This top heating element restores radiant heat for broiling and browning. DIY repair takes 15-30 minutes.
I am extremely happy to say that I ordered my replacement part from Appliance parts Pros.com. This is the 3rd time I have done business with them and like each time before I looked at a video they have showing how the repair is to be properly done. Best website hands down for appliance parts! Read more
This 8-inch surface element restores reliable heating on an electric range or cooktop. Replace a failed burner to bring the cooking zone back to proper operation and consistent cooking performance. What it does:
We ordered the part it arrived within a couple of days and my son installed it without any trouble. Read more
This part is a grill element that is used on a cooktop. The element is responsible for supplying heat to the cooking area of the cooktop. If the element is not lighting up orange or red when it is turned on, it will need to be replaced. This part may need
Ordered all the parts needed, replaced them and the Jenn Air worked just fine. Read more
This radiant surface heating element restores proper burner performance on electric glass cooktops/ranges. It replaces a failed element so cookware heats evenly and reliably beneath the ceramic glass. What it does:
Parts came in and they were exact replacements so no problem changing them out. The stove works great. Read more
Burner won't heat or has cold spots? This surface heating element restores reliable, controllable heat to your cooktop. Direct-fit replacement.
The replacement element included extensions to make the wires long enough. Read more
Burner won't heat or only works on one setting? This surface heating element restores even heat to your cooktop. Simple plug-in replacement.
Ordered a new one from appliance pro got it fast and put it in work's great. Read more
Fix a broiler that won't heat or a melted element. This range broil element delivers direct radiant heat at the top of your oven during the broil cycle.
Replaced the element. Read more
Burner won't heat or stays on high? This dual radiant surface element restores proper heating. DIY-friendly repair—lift cooktop, disconnect wires.
Googled "How to fix Whirlpool flat surface element"? Up came a YouTube video of how to remove screws and lift top to remove part and order a new one. It was important to know the Model number and as soon as I had that it took a few minutes to google a parts replacement site. This site was very quick and easy and I had the part in 2 days and installed in just a few minutes. Read more
Burner not heating or heating unevenly? This 8-inch surface element restores reliable cooktop performance. Simple plug-in installation in minutes.
REPLACED NEW RIGHT FRONT POWER BURNER. THIS DID NOT FIX THE PROBLEM. I THEN REPLACED THE BURNER CONNECTING SWITCH BY FOLLOWING THE INSTRUCTIONS ON YOUR VIDEO. BURNER HEATS UP NORMALLY, BUT I DON'T KNOW YET IF IT WILL SUDDENLY GO TO THE HIGH SETTING. IT WAS A SPORADIC PROBLEM I WAS HAVING...SO I'M HOPING THIS SOLVES THE ISSUE. FINGERS ARE CROSSED....BUT IN EITHER CASE....I NEEDED A NEW BURNER. REPAIR WAS SIMPLE....THE INSTRUCTIONAL VIDEO WAS VERY EASY TO FOLLOW. Read more
Burner won't heat or heats unevenly? This surface heating element restores reliable heat to your electric cooktop. Moderate DIY repair in 30-60 minutes.
Replaced with new burner. Read more
Broil element stopped heating or browning food? This upper oven heating element restores broiling function. Easy DIY fix—unplug, remove screws, swap.
Easy fix, took out the screws and disconnected the element. Make sure you unplug the oven!! replaced it with the new elements. oven is working good. Read more
Replace a burner that won't heat or heats unevenly with this 6-inch surface element. Compatible with electric ranges and cooktops. DIY-friendly install.
We had ordered and installed the drip pans and when we took a look, we knew we needed new elements. Those were perfect; exact replacement. The problem was on the eight inch units, the rim of the drip pan touched the element. It was a simple matter of removing a small bit of the drip pan where the element enters. Aircraft snips and a little polishing with a Dremel tool, and all is well. Wife loves the new elements. Read more
Burner not heating or working? This surface heating element restores even, responsive heat to your cooktop. Straightforward DIY fix for failed burners.
Very good. You sent the part, I put it in and now it’s working. Read more