Whirlpool Range / Cooktop / Oven Hinge Parts

This metal refrigerator door hinge secures and pivots the appliance door so it opens and closes smoothly, helping maintain a tight seal and proper door alignment for reliable cooling. What it does

• Supports the refrigerator door and provides the pivot point for opening and closing
• Keeps the door aligned to help the gasket seal and maintain interior temperature
• Worn or damaged hinge can cause the door to sag, rub, make noise, or not close fully
• Replacing a bent or broken hinge restores proper door movement and alignment

• Disconnect power to the appliance before starting any repair
• Use proper tools and support the door when removing or installing the hinge to avoid dropping or bending the door
• Check related fasteners and mounting surfaces for damage and replace if needed

The Hinge-Door is an OEM component specifically designed for Whirlpool gas ranges. It is the stainless steel door hinge assembly that allows smooth, controlled movement of the oven door. The hinges support the weight of the door and maintain proper alignment between the door and oven cavity.

Symptoms of bad door hinges include:

• Loose, wobbly, or sagging door that does not stay firmly in place
• Difficulty in fully opening or closing the door 
• Excessive noise or vibration from the hinges
• Pinholes, cracks, or other damage to the hinge surface

Causes of failure are typically wear over the heavy usage life of a range. Hinges may also become misaligned or damaged by accidental impact.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Replacement door hinge that supports and secures the appliance door, restoring proper alignment for smooth opening and closing. Ideal when the door sags or rubs against the cabinet. What it does

• Provides the pivot point that holds and aligns the door for even gaps and a proper seal.
• Restores smooth, stable opening and closing when a worn hinge causes sticking or noisy movement.
• Helps correct door sagging, rubbing or scraping, and prevents uneven wear on the gasket.
• Replaces bent, corroded or damaged hinge hardware that interferes with proper door operation.

• Disconnect power to the appliance (unplug or switch off at the breaker) before beginning work.
• Support the door securely (use a helper or a support block) before removing hinge fasteners to prevent injury or damage.
• Use basic hand tools; avoid overtightening fasteners—tighten until snug and check door alignment then adjust as needed.

This door hinge supports and pivots the appliance door so it opens smoothly and closes securely. Replacing a worn hinge restores proper alignment and sealing to help the door latch correctly and operate as designed.

• Provides the pivot point and maintains door alignment
• Helps ensure smooth opening/closing and proper latching
• Supports a tight seal to prevent gaps, rattles, or temperature/moisture loss
• Typical failure signs: door sags, binds, squeaks, or won't stay closed/aligned

• Disconnect power before service; wear gloves to protect from sharp edges
• Support the door and control any spring tension; remove mounting hardware and the old hinge
• Install the new hinge in the same orientation; transfer any reusable hardware
• Adjust as needed

This door hinge supports and guides the appliance door so it opens and closes smoothly and stays aligned with the latch and gasket. Replacing a worn hinge restores proper fit and closing action to reduce rubbing and poor sealing.

• Provides the pivot point and supports the door's weight during operation
• Maintains alignment for an even gap and consistent seal
• Helps correct sagging, scraping, or a door that won't close flush
• Common signs of wear: bent/cracked hinge, squeaking or popping, misalignment

• Disconnect power before servicing and support the door to prevent strain or damage
• Remove mounting fasteners; transfer any reusable screws, spacers, or covers from the old hinge
• Install and snug fasteners, then check door alignment and closure; adjust as needed
• Open and close the door several times to verify smooth operation and recheck fasteners

This oven door hinge restores smooth, controlled door movement and a proper seal. Worn hinges can cause a sagging door, poor closure, or binding—replacing the hinge helps maintain safe operation and consistent cooking performance.

• Supports the oven door with a spring mechanism for controlled opening and closing
• Helps pull the door tight against the gasket for an effective seal when closed
• Works with the opposite hinge to keep the door aligned and stable
• Common symptoms include door not closing fully, sagging or dropping, hard-to-open/close action, or heat escaping around the door

• Disconnect power and allow the oven to cool completely before servicing
• Remove the door following your model's instructions; engage hinge locks or use retaining pins if provided
• Replace the hinge in the same orientation; ensure hinge arms are fully seated in the receivers
• Reinstall the door and verify smooth motion and a complete seal

This oven door hinge restores smooth, controlled movement so the door opens easily and closes fully for a reliable seal. Replacing a worn hinge helps reduce heat loss and supports consistent cooking performance and safe operation.

• Provides the pivot and spring-assisted action for opening and closing the oven door
• Helps pull the door closed and hold it at intended stop positions
• Maintains even gasket contact to keep heat inside the cavity
• Common symptoms of a failing hinge: door won't close fully or sit flush, drops or slams open, binds or pops when moving, or shows an uneven gap

• Disconnect power and allow the oven to cool completely before servicing
• Support the door; open to the removal position and release hinge locks, then lift the door off
• Use caution—hinge springs are under tension; wear hand and eye protection
• Install in the same orientation and verify door alignment and smooth operation after reassembly

This left-side door hinge secures and guides the appliance door for smooth opening and closing while keeping proper alignment. Designed to restore stable door movement and reduce sagging or misalignment on compatible models. What it does:

• Replaces a worn or damaged left door hinge to restore proper door alignment and movement
• Helps prevent door sag, rubbing, or uneven gaps that can affect operation or seal
• Provides a durable pivot point for consistent opening and closing action
• Matches the original gray finish for proper fit and aesthetics

• One left-side door hinge (gray)

• Verify power is off and appliance is stable before starting any work
• Remove door or support it per your model's service instructions to avoid injury or damage
• Use appropriate tools and keep fasteners organized for reassembly