Whirlpool Refrigerator Control Board

This part is a moisture sensor control board that is used on dryer units. This component monitors the moisture levels within the dryer and adjusts the dry time during the automatic drying cycle. A new moisture sensor control board will be needed if the time is not advancing in the automatic drying cycle, even if it does advance in the timed dry cycle. Another sign is if the dryer continues to run after the clothing inside is dry. Unplug the dryer from its power source prior to replacing this component. The person performing this task may wish to wear work gloves to protect their hands.The moisture sensor control board is compatible with dryers that are manufactured by Kenmore, KitchenAid, Kenmore Elite, Whirlpool, Amana, Crosley, Maytag, Inglis, Sears Canada, Roper, and Sears. This part is sold individually and it is a genuine OEM replacement part that comes straight from the manufacturer.

This defrost timer assembly cycles the refrigerator between cooling and defrost modes to prevent excess frost buildup and help maintain consistent temperatures. Replace a failed timer to restore regular defrost scheduling and reduce icing. What it does:

• Advances the refrigerator between cooling and defrost cycles on a timed schedule.
• Stops missed defrosts that can cause frost buildup on the evaporator and reduced cooling efficiency.
• Addresses symptoms such as excessive frost/ice, inconsistent temperatures, or a freezer that runs constantly.
• Acts as the control that engages the defrost heater and returns the unit to cooling when the cycle finishes.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Access the timer via the control panel or rear service area; document wiring or take photos before disconnecting.
• Install the timer in the same orientation and reconnect wires to the original terminals; do not force connectors.

The Control Board Box is an OEM replacement part for Whirlpool refrigerators. Housed internally, it contains the digital control board that regulates all refrigerator functions. 

Symptoms of a faulty control board box include:  

• Lights or compartments not functioning properly
• Inability to adjust temperature settings  
• Fluctuating interior temperatures
• Refrigerator failing to power on or cool 

Causes can be moisture damage over time compromising electronics, accidental impact trauma to the plastic case, or standard component degradation during usage cycles. 

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Kenmore models.

This inverter box is the electronic module that conditions and routes power to the refrigerator compressor, helping restore variable-speed compressor operation and consistent cooling when the inverter has failed. What it does:

• Regulates and converts power for the compressor's inverter drive to support variable-speed operation.
• Replaces a failed inverter module that can cause the compressor not to start or to run intermittently.
• Commonly used when the refrigerator runs warm, cycles abnormally, or displays inverter-related errors.
• Houses the control electronics for compressor power management.

• Always disconnect power before servicing the appliance to avoid shock.
• Access may require removing the rear or control housing panels; note wire routing and connector positions before disconnecting.
• Handle as an electronic component: protect from moisture, impact, and static discharge.

This is a genuine main control board for refrigerators. The main control board is what handles the functions of the fridge, including defrost times and temperature control. The board can become damaged over time and the electrical components could wear out from regular use. If the control board is not working properly, the refrigerator may not be able to maintain a proper temperature.If the control board is faulty, it needs to be replaced as soon as possible. Always disconnect the refrigerator before beginning any repairs. Be sure to wear gloves to protect the hands and work carefully with the small electrical parts so that they aren't damaged during installation.This genuine OEM replacement part is manufactured to exact standards and will provide a perfect fit for compatible machines from Whirlpool, Maytag, Jenn-Air, Estate, Kenmore, and others. The assembly is sold individually and does not include any hardware or wiring accessories.

This electronic control board is the appliance's main logic module, managing cycles, timing and the user interface to restore responsive controls and proper operation. Ideal when pushbuttons, displays or automatic functions fail. What it does:

• Controls cycle selection, timing and program sequences for the appliance's functions.
• Sends signals to motors, valves and heaters so components run at the correct times.
• Interfaces with the user controls and display; helps interpret button presses and touch inputs.
• Common symptoms this part can cause: unresponsive controls or display, stuck or non-advancing cycles, random errors or failure to start.

• One electronic control board

• Disconnect power before beginning work to avoid electric shock.
• Handle the board by the edges and avoid touching components; use an anti-static strap if available.
• Compare the replacement board to the original to ensure matching connectors and mounting points.
• Reassemble panels and verify operation.

This user interface assembly restores the front control panel and touch/display functions, so you can reliably set oven modes, temperatures, and timers. Fits dovetail-style front consoles in compatible ranges. What it does:

• Replaces the console's touch/display module that controls oven functions and shows settings
• Restores response to button presses and visible status indicators when the original is unresponsive
• Interfaces with the oven's control electronics to send user commands to the main control board

• Disconnect power to the appliance (unplug or switch off circuit breaker) before attempting any service
• Handle the display and ribbon cable carefully; avoid touching contacts or bending connectors

The Control Board is an OEM part for Whirlpool refrigerators. As the central processing unit, this board oversees all cooling, temperature regulation and digital display operations.

The control board monitors factors like door openings, freezer and fridge temperatures using various sensors. It then directs the compressor, fans, defrost componentry accordingly.

Causes of a failed control board commonly involve progressive damage from moisture or dust infiltration over many years of service. Physical impact can potentially disrupt soldered connections as well.

Symptoms of a faulty board include:

• Inability to adjust temperature settings as desired
• Fluctuating freezer or fridge temperatures
• Fault codes appearing regularly on the LCD display

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM replacement part for Whirlpool bottom-mount refrigerators. It serves as the electronic control module located inside the unit.

Symptoms of a malfunctioning control board include: 

• Failure to achieve proper refrigerator and freezer temperatures  
• Sensors, displays, or timers showing inaccurate readings   
• Unpredictable fluctuations in cooling performance
• Inability to adequately regulate humidity levels 

Causes of a bad electronic control module often include failure of internal temperature or humidity sensors over extended use. Exposure to rapid fluctuations in conditions inside the fridge can potentially damage circuitry.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and Kenmore bottom-mount refrigerators.

The Cntrl-Elec is an OEM component specifically designed for Whirlpool refrigerators. This control electrical board is responsible for operating all critical refrigerator functions such as cooling, defrosting, temperature regulation, and controlling features like the ice maker. 

Causes of a bad control electrical board can include damage from power surges or outages, moisture intrusion that causes corrosion to circuitry over time, or failure of electronic components like sensors, relays, or microprocessors. 

Symptoms of a bad control electrical board include:

• Inoperative refrigerator functions like cooling or ice-making  
• Erratic temperatures or humidity inside refrigerator sections
• Fault codes or error messages appearing on control displays

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a refrigerator main control board. It manages and monitors the temperature settings of the appliance, including defrosting and cooling times. If the main control board is damaged or no longer working, the refrigerator or freezer could become too warm or cool, stop defrosting, or no longer start. In this situation, the part will need to be replaced.The only tool needed to replace the main control board is a flat blade screwdriver. First, make sure the refrigerator is unplugged to avoid it coming on during the replacement process. Next, two screws should be removed where the door closes before the light shield is taken off by pushing it to the back of the appliance. Find the access panel holding the main control board and apply pressure to pull it away. Free the pegs and move the hinges toward the front. Finally, install the connectors and take out the part before replacing it with a new component.This main control board is designed as an OEM replacement part sourced directly from the manufacturer. It is sold as a single component and fits several models of refrigerators from Ikea, Maytag, and Whirlpool.

The Inverter Box is an OEM component specifically designed for Whirlpool French door refrigerators. Located inside the refrigerator compartment top behind removable panels, the inverter box houses electronic components that control the compressor motor and refrigeration systems.

Causes of a bad inverter box include failure of internal circuit boards over several years of regulating refrigeration cycles or damage from liquid spills inside the unit.  

Symptoms of a bad inverter box include:

• Failure of the refrigerator section to adequately cool and maintain temperatures
• Erratic fluctuations in cold air dispensing from vents     
• Repeated triggering of defrosting modes unnecessarily 
• Inability to regulate between freezer and refrigerator settings

This Whirlpool replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, and Kenmore side-by-side refrigerators.
 

This Whirlpool Fridge Control Box is an OEM part for a range of Whirlpool refrigerator models. It helps to manage the refrigerator's temperature and defrost settings. The control box is engineered to meet Whirlpool's precise standards, ensuring seamless integration and reliable performance in your refrigerator.

A malfunctioning control box may lead to irregular temperature regulation, resulting in either insufficient cooling or overcooling. These temperature inconsistencies can affect food quality and increase energy consumption.

Symptoms of a defective fridge control box include:

• Inconsistent or fluctuating refrigerator temperatures.
• The fridge fails to start the defrost cycle, leading to ice buildup.
• Unusual noises emanating from the fridge, indicating relay or electrical issues.
• The fridge runs continuously without cycling off.
• Digital displays or internal lights malfunctioning or not working.

This is a genuine Whirlpool OEM replacement part and is also compatible with Maytag, Jenn-Air, and some Kenmore models.
 

The Electronic Control Board is an OEM part for Whirlpool refrigerators. It serves as the central hub for managing various functions and settings of the refrigerator, including temperature regulation, defrost cycles, and energy-efficient operations. This critical component ensures that all electronic and mechanical parts are synchronized for optimal performance.

Causes of a bad Electronic Control Board can include power surges, exposure to moisture, or general electronic failures. Such issues can impair the board's ability to send and receive signals correctly, affecting the refrigerator's functionality.

Symptoms of a failing Electronic Control Board include:

• The refrigerator not cooling properly
• Irregular or inconsistent temperatures
• The display panel malfunctioning or displaying incorrect information
• Unusual noises due to relays clicking on and off irregularly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool refrigerators. This component acts as the brain of the refrigerator, managing and regulating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. By processing inputs from sensors and user settings, the control board ensures that the refrigerator operates efficiently and maintains the desired temperature.

Causes of a bad control board can include power surges, electrical component failures, or damage from moisture or debris. A malfunctioning control board can lead to various operational issues and inconsistent performance.

Symptoms of a bad electronic control board include:

• The refrigerator not cooling properly
• The freezer or refrigerator compartments being too warm or too cold
• The refrigerator not running at all
• Erratic or unresponsive control panel
• Unusual noises or failure to start the defrost cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic power supply board converts incoming AC power to the low-voltage DC used by the refrigerator's controls and components. Replacing a failed board restores stable power to the UI, fans, lights, and cooling functions.

• Converts line voltage to regulated low-voltage DC for control electronics
• Distributes power to the main control, display, sensors, fans, and valve/relay circuits
• Common signs include a blank or non-responsive control panel, no interior lights or dispenser, intermittent power/clicking, or the unit not running even though the outlet has power
• Failures may follow electrical surges or shorted loads

• Disconnect power at the breaker or unplug before servicing; capacitors may hold a charge
• Use ESD protection and handle the board by its edges
• Photograph/label all connectors; transfer wires one by one and ensure full seating
• Mount securely and inspect for pinched/shorted wires before restoring power