Need Help?
Call or text
Ice maker stopped producing ice? This refrigerator ice maker assembly restores ice production. DIY-friendly installation takes about 15 minutes.
We had a sears tech come out and "inspect" our freezer - he said it was one of the 2 vales behind the fridge that needed to be replaced. I found them for 50 bucks each on amazon... but then I thought I might shop around. Then i found this kit - that has the 2 valves AND the icemaker assembly for basically the same price. I went ahead and swapped out the icemaker assembly since it didn't involve getting behind the fridge. the next morning - BOOM ice. lots of ice. amazed. and happy. Read more
Missing or cracked ice bin? This replacement ice cube pan restores contained ice storage in your refrigerator's freezer. Simple slide-in installation.
Had the parts I needed at a lower cost Read more
Ice maker won't stop making ice or arm keeps falling off? This shut-off arm senses bin levels to control production. Simple snap-in installation.
Fix ice dispenser grinding noises and jams with this lower ice crusher bin. Supports crusher blades and restores smooth crushed-ice dispensing.
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw. Read more
Note: Extension only. For shut off arm, order W11251736.
I found you on google. We have an after market ice maker installed on our Jenn Air fridge. It was running over all the time. My brother in law had an ice maker on his fridge and it has an attachment on his icemaker that shuts it off before it overeflows. I went to Lowes and looked at a whirlpool fridge that has an attachment on its icemaker. I got the part number on it. I went on line with the part number and it came up on your website with a whirlpool number. I called your number and... Read more
Refrigerator not making ice or ice maker not harvesting? This complete ice maker assembly fixes no ice production. DIY-friendly, 10-30 minute install.
By replacing the ice maker after trying the electronic boards and water infill valve first. Your people were incredibly helpful. Read more
Ice dumping on freezer floor instead of bin? A broken ice maker cover door causes ice to miss the chute. This snap-on cover restores proper ice dispensing.
The video was great - followed the instructions - replaced the parts - icemaker is working like new now. Read more
Ice won't dispense or motor hums without dispensing? A faulty ice container bin often causes these issues. Simple replacement restores ice dispensing.
I ordered a complete new bin with everything in it attached already. All I had to do was wash it and set it in the compartment on freezer door. Within a couple hours, I had ice again. Easy fix. Read more
Ice maker overflowing or won't stop making ice? This shut-off arm senses ice levels to control production. Simple DIY fix in under an hour.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more
Ice maker not working or frosting over? This protective cover shields the control module from debris and moisture. Easy 30-minute DIY installation.
Utilizing the videos provided, I replaced it very easily. The videos were perfect and it took little or no time. Read more
Ice dropping throughout freezer? Replace your cracked or warped ice storage bin to prevent spills and jams. Direct-fit part keeps cubes contained.
We ordered a new tray from AppliancPartsPros.com and installed it. Read more
By Whirlpool. For porcelain liner Whirlpool, Kitchen Aid, Roper, Estate and Kenmore (with model prefix 106) refrigerator models with 30, 33 and 36 inch wide cabinets. Incorporates round plug. Kit includes wiring harness, fill tubes, water valve, ice bin, hardware and instructions.
My husband watched the video you had on how to install and uninstall an icemaker and it was very detailed and informative! When I called in I had no idea what all I needed, but the phone rep made sure I got all the parts needed for the job!!! Read more
Ice maker not producing cubes or freezing up? This assembly automatically freezes water and ejects ice on a controlled cycle, restoring consistent ice.
Ice maker not cycling or shutting off? This control arm extension restores proper movement to the ice maker mechanism. Simple snap-in replacement.
The Ice Maker Scoop is an OEM component specifically designed for Whirlpool ice machines. As an included accessory, it provides a sanitary and convenient way for users to fetch ice from the storage bin.
The scoop is strategically designed with an ergonomic handle and wide opening bowl shape. This facilitates easy scooping and transport of ice cubes without spillage or crumbling. Its food-safe materials maintain hygienic conditions in the storage area.
Symptoms of a faulty scoop include:
This OEM Whirlpool scoop is also compatible with some Scotsman and Manitowoc ice machines. Replace yours today to restore safe and hygienic ice retrieval from the storage bin.
Discovered appliancepartspros.com and placed the order for the grill and ice scoop. Read more
Ice dispenser not working or auger keeps falling off? This coupling connects the motor to the auger. Simple 15-minute DIY fix restores ice dispensing.
Required new ice bin (container) which has busted up in pieces from the stress of trying to turn while half melted ice had it jammed, something had to give. Ice auger ripped itself out of the dispenser end breaking the ice container. Got new container, disassembled per the drawing, reassembled. Read more