Whirlpool Wall Oven Knob, Dial & Button

A direct-replacement control knob for range and oven front panels that restores safe and accurate control of temperature or function settings. Simple to swap and designed for straightforward push-on installation. What it does

• Replaces a worn, broken, missing, or stripped range/oven control knob
• Provides a secure grip for setting temperature, bake, broil, or burner/select functions
• Helps prevent accidental setting changes from loose or damaged knobs
• Fits splined/shaft-style controls commonly used on many Whirlpool-style ranges and ovens

• One control knob

• Turn appliance controls off and ensure surface is cool before installing
• Remove the old knob by pulling straight off the control shaft; align splines and push the new knob onto the shaft until seated
• Do not force; if knob does not slide on easily, verify shaft type and orientation

This is a replacement control knob that restores a worn or broken selector on a household range or cooktop. It provides a secure grip for turning controls so settings stay accurate and easy to change. What it does

• Replaces a stripped, cracked or missing control knob so you can select temperature or function again
• Restores tactile grip and clear position alignment for reliable control
• Stops slipping or wobbling that can prevent accurate adjustments
• Simple push-on design aligns to the control shaft for consistent operation

• Disconnect power to the appliance before servicing controls to avoid injury
• Most installations are push-on: pull the old knob straight off and push the new knob fully onto the splined shaft
• If the knob is tight, use a steady pull or a knob-puller tool to avoid damage
• Align pointer/indicator to the control scale before using

This replacement control knob restores a secure, easy-to-grip interface for selecting settings on compatible appliances. It replaces a cracked, loose, or missing knob so you can reliably turn controls and change cycles or temperatures. What it does:

• Provides a firm grip for rotating a control shaft to select settings
• Replaces damaged, worn, or missing knobs that slip or won't engage
• Restores proper alignment with the control shaft splines for accurate selection
• Commonly used when a knob is cracked, loose, or completely broken

• Disconnect power to the appliance before servicing to avoid shock or injury
• Most knobs pull straight off the control shaft; align splines and push the new knob fully onto the shaft
• If knob is secured with a set screw, loosen/tighten with the appropriate screwdriver; do not overtighten

Color: Biscuit. Other colors: For black use WP9750372FF, for white use WP9750372FW.

This replacement control knob restores a range or cooktop's user control, making it easy to set or change heat and function settings. Simple to install, it refreshes worn or broken knobs so you can operate controls safely and accurately. What it does

• Provides a firm, easy-to-grip control for adjusting temperature and function settings
• Replaces cracked, stripped, or missing knobs that slip or won't turn
• Restores clear pointer alignment so settings register correctly
• Helps prevent accidental changes by fitting securely on the control shaft

• Disconnect power to the appliance before servicing for safety
• Pull the old knob straight off the control shaft; some models may require loosening a set screw
• Align the new knob's splines or hub with the control shaft and press firmly until seated
• Test control operation after installation; stop if it resists or binds

A direct-replacement control knob that restores safe, easy control of your appliance's selector or temperature shaft. Simple to install and restores secure turning when the original knob is cracked, stripped, or missing. What it does

• Fits onto the appliance control shaft to let you select settings or adjust temperature.
• Replaces worn, cracked, or stripped knobs that slip or won't engage the shaft.
• Enables reliable, tactile control for accurate setting selection.
• Works with compatible Whirlpool control assemblies where this knob is specified.

• One replacement control knob.

• Disconnect power (or gas for gas appliances) before servicing controls.
• Remove the old knob by pulling it straight off the control shaft; align splines and push the new knob on until fully seated.
• Do not force the knob onto the shaft; check spline orientation first to avoid damage.
• If the shaft is damaged or the knob still slips after installation, the control or shaft may need replacement.

This control knob replaces a worn, broken or missing range control knob to restore safe, reliable temperature and function control. It provides the tactile interface for selecting heat settings on compatible ranges. What it does:

• Replaces a damaged or missing range control knob so you can set burners or oven functions reliably
• Provides a secure grip and positive detents for accurate selection of settings
• Stops slipping and loose rotation that prevent proper temperature selection
• Helps prevent accidental setting changes that can occur with cracked or stripped knobs

• Always disconnect power to the appliance (unplug or shut off breaker) and turn gas supply off before servicing
• Remove the old knob by pulling straight off the control shaft; align the new knob to the splines and push on until fully seated
• No special tools typically required; if knob is tight, use a steady, even pull—avoid twisting to prevent shaft damage

This inset control knob replaces a worn or broken stove/oven control knob to restore secure, easy control of temperature and function settings. It matches OEM fit for direct replacement on compatible GE ranges and cooktops. What it does:

• Replaces a damaged or stripped control knob so settings turn and stay in place
• Provides a positive grip for precise temperature and function selection
• Restores correct fit on the control shaft to prevent slipping or wobble
• Helps resolve symptoms like a loose, cracked, or hard-to-turn knob

• Disconnect power or unplug the appliance before servicing to avoid shock or injury
• Pull off the old knob straight from the control shaft; align splines and press the new knob onto the shaft until fully seated
• Do not force the knob; if it won't seat, verify shaft type and orientation to avoid damage

Color: Stainless

This burner knob is the user control for turning range or cooktop burners on and off and adjusting flame/heat settings. It restores safe, tactile control when original knobs are worn, cracked, or missing. What it does:

• Provides a grip surface and interface to rotate the valve or switch for burner heat selection
• Replaces worn, stripped, or damaged knobs that prevent smooth rotation or accurate setting
• Helps stop accidental heat changes caused by loose or broken controls
• Fits on standard splined valve stems used on many Whirlpool ranges and cooktops

• Disconnect power to the appliance and shut off gas before servicing
• Pull off the old knob straight from the valve stem; align splines and push the new knob onto the stem until fully seated
• Do not force the knob; if it does not slide on easily, verify correct orientation and spline match

This white control knob replaces a worn or damaged selector on compatible Whirlpool range and oven controls to restore easy setting selection and a secure grip. Simple, direct replacement that returns normal knob operation. What it does:

• Replaces a stripped, cracked, or missing control knob so you can change settings easily
• Provides a clear pointer and tactile stop for accurate temperature or function selection
• Restores a secure fit to the control shaft for safe, reliable use
• Helps eliminate slipping, wobbling, or intermittent contact caused by a damaged knob

• Disconnect power to the appliance before servicing to avoid shock or injury
• Pull the old knob straight off the control shaft (use gentle rocking if needed) and push the new knob fully onto the shaft until seated
• Verify proper alignment of the pointer/indicator with the control markings before restoring power

The Burner Knob is an OEM replacement part for Whirlpool ranges. It is designed to control the individual burners on your range, allowing you to adjust the heat levels for cooking.

A bad burner knob can occur due to wear and tear, damage, or malfunction. If you notice symptoms such as difficulty turning the knob, a loose or wobbly fit, or the inability to adjust the burner heat properly, it may be time to replace the burner knob.

Symptoms of a bad burner knob include:

• Difficulty turning the knob
• Loose or wobbly fit
• Inability to adjust the burner heat properly

Repair your range by replacing the faulty or damaged burner knob with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Stainless

Replace a damaged or missing gas burner knob to restore smooth, precise flame control and a clean, finished look. This knob attaches to the surface burner valve stem so you can turn the burner on and adjust heat levels.

• Attaches to the surface burner valve stem to select Off/ignite/heat settings
• Restores positive feel and control when the original knob is cracked, stripped, or loose
• Helps ensure accurate flame adjustment during cooking
• Common symptoms: knob broken, missing, wobbly, or spins without turning the valve

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the valve stem
• Align the new knob with the valve stem and press straight on until fully seated
• Verify smooth rotation and proper Off position after installation

This control knob replaces a worn, cracked, or missing knob so you can accurately select settings again. It fits onto the control shaft and restores a secure, positive feel and clean appearance. What it does:

• Attaches to the control shaft to engage and adjust the setting
• Restores smooth, accurate selection when the old knob is stripped or loose
• Helps correct issues like a knob that spins freely or won't stay on
• Improves usability and cosmetics when the original is damaged or missing

• 1 control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the control shaft
• Align the new knob's insert with the flat/D-shaped or splined shaft and press on until fully seated
• The control moves through all positions and operates correctly

This replacement control knob restores a solid, precise feel when selecting settings on your appliance. It replaces a cracked, loose, or missing knob so the control shaft engages properly and your chosen settings hold. What it does:

• Mounts on the control shaft to select functions such as cycles, temperature, or burner level
• Common symptoms: cracked/broken knob, loose or wobbly fit, knob falls off, turns without engaging the control
• Restores proper engagement so settings stay put during use
• Direct replacement sized to fit the original control shaft interface

• Includes 1 control knob

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the shaft—avoid prying against the control panel
• Align the new knob with the shaft and press firmly until fully seated
• After installation, rotate through settings to ensure proper engagement

This replacement control knob restores safe, reliable finger control for an appliance's front panel. It provides a secure grip to select settings and replaces worn, cracked, or missing knobs so controls operate smoothly. What it does

• Fits onto the control shaft so you can turn and select oven, range or appliance settings.
• Replaces knobs that are cracked, loose, hard to turn, or missing.
• Restores clear indicator alignment for accurate setting selection.
• Helps prevent accidental slips and improves grip when adjusting controls.

• Disconnect power to the appliance before servicing; follow manufacturer safety guidance.
• Typically installs by pulling the old knob straight off the shaft and pushing the replacement onto the shaft until seated.
• If the knob feels loose after installation, check the shaft adapter or insert for wear and replace as needed.