Yard Machines Lawn Mower Parts

This control cable is a replacement part for use with many models of walk-behind mowers. The cable connects to the mower's control bar and is used to run the engine. When the cable is released, the engine will shut off. It is an important part of the machine, and if it is broken, it will not run.The cables are durable, but they may break over time. In some cases, they might wear out and snap or break from damage. In other cases, the ends might snap and break off. The cable might fray or kink, as well. Regardless of the problem, the owner will want to replace it right away.This control cable is for use with select mower models from Yard-Man, Husky, Yard Machines, and MTD. The cable is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This throttle cable is a genuine MTD part, sold individually. This throttle cable can be used as a replacement part in a lawn mower. The purpose of a throttle cable in a lawn mower is to allow the operator to regulate and set the speed and pace of the appliance while in use through the engagement and disengagement of the throttle cable which propels and stops the appliance, respectively.If the throttle cable is frayed, torn, ripped, scraped, warped, eroded, or otherwise damaged, the throttle cable should be removed and replaced by this genuine OEM replacement part in order to continue the safe and proper usage of the lawn mower. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This throttle cable is compatible with the following outdoor appliance brands: MTD.

This is a throttle body intended for use with lawnmowers and tractors. The throttle body is attached to the control cable, the throttle control wire, and the throttle lever. It can be damaged or wear out with regular use. Signs that the throttle body is failing or going bad include a very low idle or poor idle. Stalling of the machine when stopping the device is another indicator that the throttle body is bad. When this happens, a new throttle body must be installed.Replacing a throttle body is simple. It requires a set of pliers, a wrench, and a screwdriver. Always wear gloves when working on a throttle body repair. Make sure to allow time for the machine to cool completely before beginning the repair.This throttle bottle is an authentic OEM part. It is supplied directly from the manufacturer. The throttle body is made of high-quality, durable plastic material. It is sold as an individual unit. The throttle body is compatible with Huskee, MTD, Yard Machines, Yard-Man, and Cub Cadet brands. It can be installed in various machines, including push-behind lawn mowers, lawn tractors, and other lawn equipment."

This OEM quality control cable is designed to be used with walk-behind lawnmowers to stop the blade if the control handle is released. If the cable is damaged or broken, it will not release the brake when the lever is pressed. This is a safety feature to ensure the user can easily stop the mower by releasing the lever. The control cable has delicate end connections that can wear out through normal use. If this happens, the lawnmower may malfunction, and the component should be replaced.If a visual inspection of the control cable shows wear or a break, it will need to be replaced. There are no tools required for the process. A set of work gloves can be useful. Take the original control cable and untwist it so it can be removed from the lawnmower. The new control cable can be pushed into place.This control cable is an authentic replacement part directly sourced from the manufacturer and sold as an individual unit. The cable is made for use with lawnmowers manufactured by Ryobi, Yard Machines, MTD, Yard-Man, and Bolens.

This replacement part is a ratchet wheel, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Ratchet wheels are commonly found in many types of machinery. The ridges around the wheel allow for continuous motion in one direction, while completely prevention any kind of motion in the other direction. This is an important part of many type of lawn mowers. A new ratchet wheel might be needed if the current one is visibly worn down or damaged in any way. If the user notices unfamiliar sounds coming from inside the machine, then the ratchet wheel might not be turning in the complete right direction. Be sure to wear work gloves while replacing this part as the wheel itself might be sharp. This replacement part is sold individually. Note that it is a genuine OEM part sourced directly from the manufacturer.

The spacer is a standard piece of hardware that is used on various lawn mowers. This spacer has multiple applications based on the model and design. It is typically installed on shafts and in places where an additional gap is needed between connections or hardware. These parts are durable, but can become damaged or worn over time and require a replacement. Without functioning spacers, parts may rub together and create friction or simply fail to work properly. Replacing parts with genuine OEM hardware like these standard spacers will get the equipment back in working order. This genuine OEM spacer is designed for use with a number of mowers from MTD, Yard Machines, Troy-Bilt, Husky, Cub Cadet, and Yard Man. This spacer is made of durable metal and sold as a single unit. Those who need more than one will have to order multiple quantities. Always wear gloves when performing lawn mower repairs.

This is a genuine replacement for the air cleaner thumb screw found on select engines used in lawn mowers. The thumb screw is a specialty part that is used to secure the air cleaner in a stable position. Over time, the screw can become damaged or worn because of the constant engine vibrations or exposure to high heat. This screw may also be lost during air filter replacements or other repair work. In either case, it should be replaced with a genuine part like this one to ensure the air cleaner remains secure and the machine can continue to be used. This genuine OEM thumb screw is manufactured by MTD and is compatible with several machines from the brand. It can also be used with models from Bolens, Yard Man, Yard Machines, HUSKEE, Cub Cadet, and Troy-Bilt. There are hundreds of compatible models that can use this thumb screw. The part is made of durable metal with a black plastic grip for easy installation with no tools required. This item is sold individually and does not include additional hardware or parts. Always allow the engine to cool completely and wear gloves when working on lawn and garden equipment.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.