Admiral Dryer Filter

This lint screen captures lint during each cycle to keep airflow steady and drying consistent. Replacing a torn or warped screen helps reduce long dry times, overheating shut-offs, and lint buildup in the vent path.

What it does

• Traps lint and debris before air exits the drum
• Maintains proper airflow for efficient, even drying
• Helps keep lint out of the blower and exhaust duct
• Replaces screens that are torn, warped, or won’t seat flush

What’s included
One lint screen.

Install notes

• Power off the dryer before reaching into the lint housing.
• Vacuum and wipe the lint channel clean before installing the new screen.
• Seat the screen fully; don’t operate the dryer without it.
• Clean the screen before every load; wash with mild soap if residue builds up.

Usage tip
If you use dryer sheets or liquid softener, rinse the screen periodically to remove film that can restrict airflow.

This genuine part is an OEM replacement part is also compatible with Amana and KitchenAid models as well.

The Dryer Lint Filter is an OEM part for Whirlpool dryers. It is responsible for trapping lint and debris from the clothes as they dry, preventing these particles from clogging the dryer vent and ensuring efficient airflow.

Causes of a bad dryer lint filter can include regular wear and tear, damage from heat or overloading, or accumulation of lint that becomes difficult to clean. A compromised lint filter can reduce dryer efficiency and increase the risk of fire.

Symptoms of a bad Dryer Lint Filter include:

• Tears or holes in the mesh
• Difficulty in inserting or removing the filter
• Excessive lint buildup in the dryer drum or vent
• Longer drying times or overheating

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lint Filter is an OEM part for Whirlpool dryers. This essential component traps lint and debris from the clothes during the drying cycle, preventing these particles from clogging the dryer’s exhaust system and ensuring optimal drying performance.

Causes of a bad lint filter can include physical damage such as cracks or breaks, wear and tear from frequent use, or clogging due to an excessive buildup of lint that reduces its effectiveness.

Symptoms of a bad lint filter include:

• Lint buildup on clothes after drying
• Increased drying times
• The filter not fitting properly in its slot
• Visible damage or tears in the filter screen

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screen fits into the appliance's filtration path. It captures debris to protect internal components and helps restore proper airflow or water flow when the original screen is torn, warped, clogged, or missing.

• Filters debris to prevent it from entering sensitive components such as pumps, blowers, or valves
• Helps maintain proper airflow or water circulation for consistent performance
• Common failure signs: torn mesh, cracked or warped frame, debris bypassing the screen
• Can contribute to longer cycles, reduced performance, or recurring clogs when damaged or missing

• Disconnect power to the appliance; turn off water supply if applicable
• Access the screen location per your model's instructions; remove the old screen and clean the housing
• Seat the new screen fully, ensuring correct orientation and that any tabs/locks engage
• Reassemble and test for proper operation; check for leaks or airflow restrictions

The Lint Screen is an OEM part for Whirlpool dryers. It is designed to trap lint and debris from the drying clothes, preventing these materials from clogging the dryer vent and ensuring efficient airflow.

Causes of a bad lint screen can include wear and tear over time, damage from improper cleaning methods, or the accumulation of lint and debris that is difficult to remove. The mesh can become torn or the frame can crack, which reduces its effectiveness.

Symptoms of a bad lint screen include:

• Excess lint on clothes after drying
• Longer drying times
• Overheating of the dryer
• Lint buildup in the dryer vent system

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Lint Filter is an OEM part for Whirlpool dryers. This filter is designed to capture lint and debris from the clothes during the drying cycle, preventing it from clogging the dryer vent and ensuring efficient airflow. Proper maintenance of the lint filter helps improve the dryer's performance and reduces the risk of fire hazards caused by lint buildup.

Over time, the lint filter can become damaged, torn, or clogged with excessive lint and debris. Common causes of a bad lint filter include wear and tear from regular use, damage from improper cleaning, or excessive lint buildup that is difficult to remove.

Symptoms of a bad dryer lint filter include:

• Visible tears or holes in the filter
• Lint not being captured effectively, leading to clogged vents
• The dryer taking longer to dry clothes due to restricted airflow
• The filter not fitting securely in its slot

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This adapter tube assembly connects sections of the appliance's water line to create a secure, leak-resistant path for water flow. Replace it if the tube is cracked or the connection no longer seals properly to prevent leaks and restore flow.

• Connects water tubing between components within the appliance's water system
• Helps maintain a tight, leak-resistant seal at the joint
• Restores proper water flow when a tube or connector is damaged
• Typical symptoms: water leaking at the connection, reduced or no water flow, visible cracks/kinks, loose fit

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure and place a towel or pan to catch any residual water
• Note routing and orientation before removal to ensure correct reassembly
• After installation, restore water and check all connections for leaks

Color: white. It measures about 12-1/2 inches wide by 8 inches high.