Admiral Dryer Parts

Best Seller

Genuine Whirlpool part

Admiral Dryer Drum Belt

By: Whirlpool

Part Number: WPY312959

The Dryer Drum Belt is an OEM replacement part for Whirlpool dryers. It is a crucial component that connects the dryer's motor to the drum, allowing the drum to rotate and tumble the clothes during the drying cycle.

Symptoms of needing to replace the dryer drum belt include:

The dryer drum not spinning or rotating
Loud squeaking or grinding noises during the drying cycle
Excessive vibration or shaking from the dryer
Clothes taking longer to dry or remaining damp

Causes of a faulty drum belt can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You Dryer belt broke from over 30 years of wear in a maytag Keith K. • Phoenix , AZ • October 18, 2014

I watched your initial video which gave me some insight into the repair. I removed power from the dryer and positioned it for maintenance. Since my dryer was a Maytag, I needed to remove to two front bottom Phillips screws from the front panel of the dryer prior to pulling the panel and door assy. from the unit. The top of the dryer now needs to be removed. Two screws, one on each side holds the top of the dryer in place accessible from within and under the top of the dryer. Once those two... Read more

$24.95

Compare At:: $32.19
You Save:: $7.24

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Door Latch Kit

4.9 (303)

By: Whirlpool

Part Number: 279570

The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.

Symptoms of needing to replace the door latch kit include:

Difficulty in closing or latching the washer door
Door opening unexpectedly during the wash cycle
Leaks or water seeping due to an improper door seal
Excessive wear or damage to the latch components

Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This part fixes the following symptoms

Door won't close
Shuts off too soon
Doesn't shut off
Takes too long to dry

Do-It-Yourself Stories from Customers like You Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015

When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ... Read more

$6.95

Compare At:: $13.85
You Save:: $6.90

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Lid Lock Assembly

4.9 (117)

By: Whirlpool

Part Number: W11307244

The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.

Symptoms of a faulty lid lock:

Washer will not start
Washer stopping randomly during operation
Lid will not lock

By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.

This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Please note: The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.

Do-It-Yourself Stories from Customers like You The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017

The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will... Read more

$97.50

Compare At:: $115.05
You Save:: $17.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Dryer Belt

4.9 (449)

By: Whirlpool

Part Number: WP40111201

The Belt is an OEM replacement part for Whirlpool dryers that is responsible for connecting the motor to the drum to allow it to tumble. Over time, dryer belts can stretch, wear out, or even break, leading to a drum that won't turn and clothes that don't dry properly. Length: 93 3/8" Width: 3/8" has 5 ridges.

Symptoms of a bad Dryer Belt include:

The dryer motor running but the drum not turning.
A squealing or thumping noise coming from the dryer.
The dryer not starting at all.

Causes of failure can include regular wear and tear from the dryer's operation, overloading the dryer beyond its capacity, which puts extra strain on the belt, or a misalignment that causes uneven wear.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You The dyer belt and dryer belt tension pulley needed to be replaced Freddrick G. • Lawrenceville , GA • July 30, 2015

I went to the local Home Depot and Lowes, but they did not have the parts because they do not carry parts for the items they actually sell to people. Jumped on the phone and did a quick search for parts and came across appliancepartspros.com. I put in the make and model of my dryer and all the parts for the dryer where listed. I ordered the items on a Wednesday night. I opted for the two day shipping. I thought the items would be at my house by Friday but they did not arrive until Monday. I... Read more

$14.64

Compare At:: $25.35
You Save:: $10.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Felt Drum Seal

4.8 (213)

By: Whirlpool

Part Number: W10612022

The Felt Drum Seal is an OEM part for Whirlpool dryers. This part creates a tight seal along the edge of the dryer drum, preventing hot air from escaping and ensuring efficient operation. The felt seal helps to minimize noise and vibration during the drying cycle by cushioning the space between the drum and the dryer body.

Over time, the felt drum seal can wear out, become compacted, or tear, leading to potential issues such as increased drying times, higher energy consumption, and excess noise.

Symptoms of a bad Felt Drum Seal include:

Clothes taking longer to dry
Unusual noises or increased vibration during operation
A visible gap between the drum and the dryer body
Excessive lint buildup inside the dryer beyond the lint trap

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

$40.95

Compare At:: $48.73
You Save:: $7.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Blower Wheel Assembly

4.8 (340)

By: Whirlpool

Part Number: Y303836

The Blower Wheel Assembly is an OEM part for Whirlpool dryers, designed to circulate air through the drum and out the vent. This part is responsible for the movement of hot air across the clothes to evaporate moisture so that clothes dry evenly and quickly.

Causes of a bad Blower Wheel Assembly can include debris buildup leading to wear and tear on the fins or a damaged hub disconnecting the wheel from the motor shaft.

Symptoms of a bad Blower Wheel Assembly include:

Unusual noises when the dryer is running.
Clothes taking longer to dry or not drying fully.
The dryer overheating due to restricted airflow.
A noticeable decrease in the exhaust.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Very concerning loud thumping noise while running our dryer. William M. • Sudbury , MA • July 20, 2019

In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future. I was wrong. I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity. I found out... Read more

$20.95

Compare At:: $27.20
You Save:: $6.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Timer

4.9 (148)

By: Whirlpool

Part Number: WPW10185982

The Dryer Timer is an OEM replacement part for Whirlpool dryers. It is a critical component that controls the timing and sequence of the various drying cycles, ensuring the machine operates correctly and efficiently.

Causes of needing to replace the dryer timer can include general wear and tear over time, electrical malfunctions, damage from power surges or voltage fluctuations, or moisture or water exposure within the timer itself.

Symptoms of a bad dryer timer include:

The dryer failing to advance through the complete cycle or getting stuck in one part of the cycle
Cycles running for an incorrect duration (too short or too long)
The dryer failing to heat, tumble, or stop at the appropriate times

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Bad dryer timer Darlene T. • Fayetteville , AR • August 22, 2014

After calling Whirlpool customer support learned that a replacement timer would be $136. The CSR gave me the part number needed. Online I found AppliacePartsPros. I called and got a very personable CSR who took my order. I was assured the part was a genuine, new--not rebuilt--timer. My order was placed in minutes. Although I ordered standard shipping and my part arrived in 2 days!! Unfortunately Whirlpool had given me the wrong part number so I contacted AppliancePartsPros and reordered... Read more

$100.41

Compare At:: $120.49
You Save:: $20.08

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Flame Sensor

4.9 (232)

By: Whirlpool

Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

The dryer not heating or producing heat properly
Error codes related to the gas system or ignition failure
The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.

This part fixes the following symptoms

Shuts off too soon
No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Tumbler Bearing Kit

4.9 (369)

By: Whirlpool

Part Number: 306508

The Tumbler Bearing Kit is an OEM replacement part for Whirlpool washing machines. It includes multiple replacement glides that support the movement of the wash basket or tub. As it rotates during the wash cycle, the tub experiences friction that the bearings help manage. For rear drum support rollers, order 12001541. Please note that repair requires two kits.

Symptoms of bad bearings include:

Excessive noise or vibrations emanating from the tub area
Difficulty rotating or spinning the tub by hand
Visible wear on the bearings
Premature breakdown of other components due to increased stress

Causes of bearing failure can be normal wear over time from the consistent rotational motion. Using the washer with an unbalanced load can accelerate bearing deterioration.

This OEM Whirlpool kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

$13.59

Compare At:: $21.82
You Save:: $8.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Dryer Door Handle

4.9 (204)

By: Whirlpool

Part Number: W10861225

The Dryer Door Handle is an OEM replacement part for Whirlpool dryers. This component serves as the primary point of contact for opening and closing the dryer door, allowing easy access to load and unload laundry.

Symptoms of a faulty dryer door handle include:

Difficulty in opening or closing the dryer door
Loose or wobbly handle movement
Handle becoming detached or falling off

Causes of needing to replace the dryer door handle can include normal wear and tear over time, physical damage from impact or mishandling, or issues with the handle's mounting points or attachment mechanisms.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Do-It-Yourself Stories from Customers like You The handle on the dryer drawer broke it was cheaply made in my opinion. Julie L. • New Lebanon , OH • April 21, 2017

I easily ordered the part, and it arrived the next day! All I had to do was snap it in. So very easy!! Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Lint Screen (Dryer Lint Filter), White

4.9 (167)

By: Whirlpool

Part Number: WPW10717210

This lint screen captures lint during each cycle to keep airflow steady and drying consistent. Replacing a torn or warped screen helps reduce long dry times, overheating shut-offs, and lint buildup in the vent path.

What it does

Traps lint and debris before air exits the drum
Maintains proper airflow for efficient, even drying
Helps keep lint out of the blower and exhaust duct
Replaces screens that are torn, warped, or won’t seat flush

What’s included
One lint screen.

Install notes

Power off the dryer before reaching into the lint housing.
Vacuum and wipe the lint channel clean before installing the new screen.
Seat the screen fully; don’t operate the dryer without it.
Clean the screen before every load; wash with mild soap if residue builds up.

Usage tip
If you use dryer sheets or liquid softener, rinse the screen periodically to remove film that can restrict airflow.

This genuine part is an OEM replacement part is also compatible with Amana and KitchenAid models as well.

Do-It-Yourself Stories from Customers like You Disformed from heat Paul D. • Centerville , OH • August 25, 2015

Slid in new screen. Read more

$50.25

Compare At:: $59.29
You Save:: $9.04

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Belt Tension Pulley

4.9 (334)

By: Whirlpool

Part Number: WP6-3700340

The Belt Tension Pulley is an OEM part for Whirlpool dryers. It is crucial for maintaining the correct tension on the dryer belt, ensuring that it runs smoothly and the drum turns properly during operation. This pulley helps to keep the belt aligned and prevents it from slipping, which is essential for the efficient performance of your dryer.

Symptoms of a bad Belt Tension Pulley include:

Unusual noises, such as squeaking or grinding, coming from the dryer when it is running.
The dryer drum failing to turn, even though the motor is running.
Excessive wear or damage to the dryer belt.

Causes of a bad belt tension pulley can include wear and tear from regular use, accumulation of lint and debris which may impede the pulley’s movement, or a failing bearing within the pulley assembly.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015

$17.95

Compare At:: $21.54
You Save:: $3.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Blower Wheel

4.8 (130)

By: Whirlpool

Part Number: WP694089

The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.

Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.

Symptoms of a bad blower wheel include:

Longer drying times for clothes
Unusual noises during the drying cycle
Overheating of the dryer
Poor airflow from the dryer vent

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not tumble
Takes too long to dry
Noisy

Do-It-Yourself Stories from Customers like You Broken blower wheel on dryer Mark B. • Independence , WV • April 12, 2014

I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website. Read more

$33.48

Compare At:: $39.84
You Save:: $6.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Catch

5.0 (35)

By: Whirlpool

Part Number: W11429587

The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.

A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.

Symptoms of a bad door catch include:

The dryer door not staying closed
Difficulty in properly latching the door shut
Loud banging noises or vibrations

Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020

I watched your video and had it fixed in less than 1 minute! Read more

$20.95

Compare At:: $25.14
You Save:: $4.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Lint Screen Housing Foam Seal

4.9 (107)

By: Whirlpool

Part Number: WP339956

The Lint Screen Housing Foam Seal is an OEM part for Whirlpool dryers. This seal is placed around the lint screen housing to prevent air leaks and ensure that the dryer operates efficiently by directing airflow properly through the lint screen. By maintaining a tight seal, this foam helps to optimize the dryer’s performance, reduce drying times, and prevent lint from escaping into the internal parts of the dryer, which can lead to potential maintenance issues and decreased efficiency.

Symptoms of a failing lint screen housing foam seal include:

Increased lint buildup inside the dryer beyond the lint screen
Longer drying times due to inefficient air circulation
Excessive heat and humidity within the dryer

Causes of foam seal deterioration typically involve normal wear and tear, exposure to high heat which can degrade the material, or improper maintenance that can tear or dislodge the foam.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Takes too long to dry
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

$10.43

Compare At:: $12.41
You Save:: $1.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Drum Support Roller

4.9 (314)

By: Whirlpool

Part Number: WP37001042

The Drum Support Roller is an OEM part for Whirlpool dryers. It plays a critical role in supporting and stabilizing the dryer drum as it rotates, allowing clothes to tumble evenly and dry efficiently. This support roller ensures smooth, quiet operation and helps prevent unnecessary strain on the motor and other components.

Causes of a bad Drum Support Roller can include continuous wear from regular use, overloading the dryer, which puts extra strain on the rollers, and lack of maintenance, such as not cleaning the lint and debris that can accumulate on the rollers.

Symptoms of a bad Drum Support Roller include:

A thumping or rumbling noise during operation
The dryer drum not turning smoothly or at all
Excessive vibration of the dryer unit

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Beating and bumping like a pair of tennis shoes were inside William R. • Simpsonville , SC • March 28, 2017

I pulled the dryer away from the wall and unplugged it. Then I used a 5/16 nut driver and removed the 2 screws in the bottom front panel and pulled it off. Next I removed the 2 5/16 screws holding the front door panel and pulled it down far enough to disconnect the wires for the light and the wires on the door switch. Then , using a putty knife I popped the springs holding the top and control panel then pulling the top up and resting it against the wall. Now I started my repair by laying on... Read more

$18.95

Compare At:: $22.74
You Save:: $3.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Admiral Dryer Parts

Admiral Dryer Drum Belt

Admiral Door Latch Kit

Admiral Lid Lock Assembly

Admiral Dryer Belt

Admiral Felt Drum Seal

Admiral Blower Wheel Assembly

Admiral Timer

Admiral Flame Sensor

Admiral Tumbler Bearing Kit

Admiral Dryer Door Handle

Admiral Lint Screen (Dryer Lint Filter), White

Admiral Belt Tension Pulley

Admiral Blower Wheel

Admiral Catch

Admiral Lint Screen Housing Foam Seal

Admiral Drum Support Roller

Related Parts

Common Problems

Popular Admiral Dryer Models