Amana Dishwasher Parts

The Inlet Assembly is an OEM part for Whirlpool dishwashers. It is responsible for controlling the flow of water into the dishwasher during the wash cycle. This assembly ensures that the correct amount of water enters the dishwasher to clean dishes effectively.

You should replace the inlet assembly if it becomes faulty. Causes of a bad inlet assembly can include wear and tear from regular use, blockages from debris or mineral buildup, or electrical issues. A malfunctioning inlet assembly can lead to inadequate water flow, which affects the dishwasher’s cleaning performance.

Symptoms of a bad inlet assembly include:

• The dishwasher not filling with water or filling slowly
• Water leaks around the inlet area
• Error codes related to water intake issues
• The dishwasher stopping mid-cycle or not starting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Whirlpool Dishwasher Door Gasket is an OEM part for Whirlpool dishwashers. It provides a watertight seal around the door to prevent water leaks during the wash cycle.  With a length of 66.5 inches, this part forms an airtight seal around the dishwasher door, preventing water leaks during operation.

Causes of a bad door gasket can include cracks and breaks developing from repeated exposure to temperature changes during wash cycles. Over time, rubber perishes leaving gaps that compromise the seal.

Symptoms of a failing door gasket:

• Water pools on the floor in front of the dishwasher
• Dishes remaining wet after a full cycle
• Visible cracks or tears in the rubber

This genuine OEM  part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

The Float Switch Base Gasket is an OEM part for Whirlpool dishwashers. This gasket is specifically designed to seal the area around the float switch base, preventing water leaks that can occur during the dishwasher's operation. 

Causes of damage to the Float Switch Base Gasket often involve normal wear and tear, as the rubber or plastic material can degrade over time due to exposure to detergents, hot water, and the mechanical action of the float switch. 

Symptoms of a bad Float Switch Base Gasket include:

• Water leaking from the bottom of the dishwasher
• Signs of water damage or corrosion around the float switch area
• The dishwasher may malfunction or display error codes related to water filling issues if water leaks interfere with the float switch operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Latch Assembly is an OEM part for Whirlpool dishwashers. It secures the dishwasher door during operation, ensuring it remains tightly closed to prevent water leakage and to allow the dishwasher to function properly.

The door latch assembly can fail due to various reasons, such as repeated use, accidental impact, or wear and tear of the latch components over time. Electrical issues or misalignment can also contribute to malfunction.

Symptoms of a bad door latch assembly include:

• The dishwasher door not staying closed
• The dishwasher not starting or stopping mid-cycle
• Water leaking from the door during operation
• Difficulty latching or unlatching the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spray Arm is an OEM part for Whirlpool dishwashers. It plays a crucial role in the cleaning process by rotating and spraying water onto the dishes to remove food particles and debris. The spray arm measures approximately 18.75 inches long and 2 inches wide.

Causes of a bad spray arm can include clogging due to food particles or mineral deposits, cracks or breakage from regular use, or a malfunction in the rotating mechanism. These issues can impede the spray arm's ability to distribute water effectively, leading to poor cleaning performance.

Symptoms of a bad spray arm include:

•  Dishes not being cleaned properly
• Noticeable clogs or blockages in the spray holes
• The spray arm not rotating during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Silverware Basket Assembly is an OEM part for Whirlpool dishwashers. It provides an organized space for holding and separating silverware and small utensils during the dishwashing cycle, ensuring they are properly cleaned and dried. This basket measures 8 inches wide, 11-1/2 inches high, and 12 inches deep. 

You should replace the silverware basket assembly if it becomes cracked, warped, or damaged. Causes of a bad silverware basket assembly can include regular wear and tear from repeated use, damage from overloading or mishandling, and exposure to high temperatures.

Symptoms of a bad silverware basket assembly include:

• Broken or missing sections of the basket
• Utensils slipping through holes or falling out
• Difficulty placing or removing silverware
• Inefficient or uneven cleaning of silverware

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dispenser is an OEM part for Whirlpool dishwashers. It is responsible for releasing detergent and rinse aid during the washing cycle. This dispenser ensures that the right amount of cleaning agents is dispensed at the appropriate times, contributing to effective cleaning and rinsing of your dishes.

Causes of a bad dispenser can include clogging due to detergent buildup, mechanical failure of the dispenser door or latch, or electronic malfunction that prevents proper operation. Regular maintenance can help prevent these issues, but over time, parts may still wear out and need replacement.

Symptoms of a bad dispenser include:

• Improper dispensing of detergent or rinse aid
• Dishwasher leaving spots or residue on dishes
• Dispenser door not opening during the cycle
• Leaks or drips from the dispenser area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Sump and motor assembly is an OEM component for Whirlpool dishwashers. Located at the bottom of the dishwasher tub, this assembly contains both the pump and motor that circulate water during the wash and rinse cycles.

Causes of a bad sump and motor assembly include mineral or grit buildup inside the pump/motor housing that causes reduced water flow, worn-out seals or impellers in the pump, or failure of the motor components.

Symptoms of a bad sump and motor assembly include:

• Incomplete cleaning even on short cycles
• Puddles of dirty or soapy water left in the bottom of the dishwasher after a cycle
• Loud noises or vibrations coming from the bottom of the dishwasher
• The dishwasher fails to drain fully

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Balance Spring is an OEM part for Whirlpool dishwashers. This part provides tension and balance to the dishwasher door, ensuring it opens and closes smoothly and stays in the desired position when loading or unloading dishes.  

Causes of damage to the door balance spring can include normal wear and tear from frequent use, corrosion due to moisture and detergent exposure, or mechanical failure from excessive force being applied to the door.  

Symptoms of a bad Door Balance Spring include:

• The dishwasher door falling open too quickly or with too much force 
• Difficulty in keeping the door open or having it snap shut unexpectedly 
• A noticeable difference in the effort required to open or close the dishwasher door 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Rack Adjuster is an OEM part for Whirlpool dishwashers, designed to allow for the easy adjustment of the dishwasher rack's height. This feature accommodates dishes of various sizes. By providing the flexibility to adjust the rack height, this part enhances the dishwasher's adaptability to different washing needs.

Symptoms of a failing Rack Adjuster include:

• Difficulty in adjusting the dishwasher rack's height
• The rack becoming loose or detaching from the adjuster
• Visible wear or damage to the adjuster components

Causes of a bad Rack Adjuster can range from normal wear and tear, which gradually degrades its components, to accidental damage during loading or unloading of dishes. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Lower Spray Arm is an OEM part for Whirlpool dishwashers. It is responsible for distributing water to clean the dishes on the lower rack. The spray arm rotates, spraying water at high pressure to ensure thorough cleaning of all items in the lower section of the dishwasher.

Causes of a bad lower spray arm can include clogs from food particles or mineral deposits, cracks or breaks from regular use, or warping from exposure to high temperatures. These issues can prevent the spray arm from rotating properly or spraying water effectively.

Symptoms of a bad lower spray arm include:

• Dishes on the lower rack not being cleaned properly
• The spray arm not rotating during the wash cycle
• Visible damage or cracks on the spray arm
• Water not spraying evenly or at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Detergent Lid Spring is an OEM part for Whirlpool dishwashers. It is responsible for providing the necessary tension to open and close the detergent dispenser lid during the wash cycle. 

Over time, the detergent lid spring can wear out, lose tension, or break due to repeated use, exposure to water and detergent, or accidental mishandling. If the spring becomes faulty, the dispenser lid may not function properly, leading to poor washing results.

Symptoms of a bad detergent lid spring include:

• Detergent dispenser lid not opening during the cycle
• Difficulty in closing the dispenser lid
• Inconsistent or incomplete release of detergent
• Visible damage or wear on the spring

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the complete detergent dispenser kit order 4387043.

The Upper Spray Arm is an OEM part for Whirlpool dishwashers. It is responsible for distributing water throughout the upper part of the dishwasher during the wash cycle, ensuring dishes are cleaned effectively.

Causes of a bad upper spray arm can include clogging from food particles, mineral deposits from hard water, or physical damage to the spray arm. These issues can impede the spray arm's ability to rotate and distribute water properly.

Symptoms of a bad upper spray arm include:

• Poor cleaning performance on the top rack
• Spray arm not spinning
• Visible damage or clogging of the spray arm holes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the spray arm retainer, use part number WP3400918.

The Upper Dishrack Wheel Assembly is an OEM part for Whirlpool dishwashers. This assembly helps the upper dishrack glide smoothly in and out of the dishwasher for easy loading and unloading of dishes.

Causes of a bad Upper Dishrack Wheel Assembly can include wear and tear from regular use, accumulation of dirt or debris on the wheels, and damage from accidental impact or heavy loads.

Symptoms of a bad Upper Dishrack Wheel Assembly include:

• Difficulty sliding the upper rack in and out
• Noisy operation when moving the rack
• Rack becoming misaligned or falling off the tracks
• Visible damage or wear to the wheels

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Middle Spray Arm is an OEM part for Whirlpool dishwashers. It is responsible for distributing water evenly throughout the dishwasher's middle rack during the wash cycle, ensuring that dishes are thoroughly cleaned from all angles. The spray arm rotates to cover the entire rack with water, facilitating effective cleaning performance.

Common causes of a bad spray arm include blockages from food particles or mineral deposits, physical damage from utensils, or general wear and tear from regular use.

Symptoms of a bad middle spray arm include:

• Dishes on the middle rack not getting clean
• Reduced water pressure from the spray arm
• Spray arm not spinning or moving properly
• Visible cracks or damage to the spray arm

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.