Amana Dishwasher Gasket & Seal

Best Seller

Genuine Whirlpool part

Amana Lower Door Seal

By: Whirlpool

Part Number: W10909089

The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles. This seal measures approximately 22 inches in length

Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.

Symptoms of a worn lower door seal include:

Water leaking out from beneath dishwasher door during cycles
Difficulty latching door completely from warped seal edges
Visible cracks, splits or brittleness along the length of the seal
Gaps allowing water intrusion beneath door perimeter

This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.

Do-It-Yourself Stories from Customers like You The dishwasher leaking out the bottom of the door. Daniel L. • Boscawen , NH • February 10, 2023

My Whirlpool dishwasher was leaking out the bottom of the door. I replaced the gasket and the lower door seal. When I ran a test wash, it was still leaking. After reading more online, I found that it could be a cracked washer arm. The initial inspection of the washer arm looked normal but when I used my faucet to slowly pour water into the inlet of the arm, I noted that water was leaking through a seam and not just the holes where it should come out. I then tried running a wash without the... Read more

$55.95

Compare At:: $67.14
You Save:: $11.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Lower Door Seal

4.6 (67)

By: Whirlpool

Part Number: WPW10497235

The Lower Door Seal is an OEM replacement part for Whirlpool refrigerators. It plays a crucial role in maintaining the proper seal between the refrigerator door and the cabinet, ensuring energy efficiency and consistent temperature control.

Causes of needing to replace the lower door seal can include normal wear and tear over time, exposure to extreme temperatures or UV light, or physical damage due to impact or mishandling.

Symptoms of a faulty lower door seal include:

Difficulty in closing the refrigerator door properly
Visible gaps or gaps around the door seal area
Condensation buildup or frost formation around the door seal
Increased energy consumption due to inefficient sealing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Dishwasher needed a new bottom door seal Daniel F. • Englewood , FL • April 03, 2016

Thanks to Jason and his tech people at Appliance Parts Pro, I was able to remove and replace the seal and eliminate all leaks at the bottom of the door. I have a Kitchenaide (Whirlpool) dishwasher model KUDC10IXBL1. Here is how to replace the bottom door seal. 1) Shut off breaker to dishwasher on the electrical panel. 2) Open the dishwasher door completely, and while supporting the door, remove the hex head screws that hold the outside cover. 2) Close the door carefully and slip the outside... Read more

$10.46

Compare At:: $12.45
You Save:: $1.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Gasket And Strike Kit

4.9 (160)

By: Whirlpool

Part Number: W10542314

The Gasket and Strike Kit is an OEM part for Whirlpool dishwashers, designed to ensure a tight and leak-proof seal around the dishwasher door. This kit includes a door gasket and a door strike, both crucial components in preventing water from leaking out during the wash cycle.

Causes of a bad Gasket and Strike Kit can include normal wear and tear from regular use, leading to a loss of elasticity in the gasket.

Symptoms of a bad Gasket and Strike Kit include:

Water leaking from around the dishwasher door.
Difficulty closing the dishwasher door or ensuring it stays latched during operation.
Visible signs of wear, such as cracks or hardening on the gasket, or bending or damage to the strike.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Leaking door gasket Scott N. • Myrtle Beach , SC • July 04, 2014

I followed your step by step instructional online video. That is one great tool you are providing for your customers! Read more

$56.95

Compare At:: $68.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Cabinet Seal

4.9 (18)

By: Whirlpool

Part Number: W10864081

The Cabinet Seal is an OEM part for Whirlpool dishwashers. This seal is crucial for preventing water leaks by creating a watertight barrier between the dishwasher tub and the door. It ensures that water stays inside the dishwasher during the wash cycle, maintaining the appliance's efficiency and protecting your kitchen from water damage.

You should replace this cabinet seal if it becomes damaged, worn out, or loses its elasticity. Causes of a bad cabinet seal can include regular wear and tear, exposure to high temperatures, or buildup of detergent and mineral deposits, which can degrade the seal material over time.

Symptoms of a bad cabinet seal include:

Water leaking from the bottom or sides of the dishwasher door
Visible cracks or tears in the seal
Increased moisture or puddles around the dishwasher
A loose or improperly seated seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking door gasket on dishwasher Curtis S. • Eldon , MO • August 03, 2016

I determined that the gasket was pinched, leaking at corner. Ordered new gasket from this site (easy find with part diagram). Removed old gasket, replaced with new. Read more

$60.95

Compare At:: $73.14
You Save:: $12.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Door Gasket

4.9 (72)

By: Whirlpool

Part Number: WPW10509257

The Door Gasket is an OEM part for Whirlpool dishwashers. This gasket is designed to create a watertight seal around the dishwasher door, preventing water from leaking out during wash cycles. It ensures that the dishwasher operates efficiently by keeping water inside the unit, maintaining optimal cleaning performance, and protecting your kitchen from water damage.

Causes of a bad door gasket can include regular wear and tear from frequent use, exposure to high temperatures and harsh detergents, or damage from debris and foreign objects. Over time, these factors can lead to the gasket becoming brittle, cracked, or deformed, compromising its sealing ability.

Symptoms of a bad door gasket include:

Water leaking from the dishwasher door during or after a cycle
Visible cracks, tears, or deformities in the gasket
The dishwasher door not closing properly or requiring extra force to close
Mold or mildew buildup on the gasket

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Dishwasher was leaking from the bottom front Alicia M. • Morganton , NC • January 12, 2015

I thought it was the gasket so I ordered a new one. While waiting for it to arrive I read some other forums where I read that sometimes the air vent on the front could be dirty and cause leaking. I popped out that vent cover and it was clogged. Using an old toothbrush and a tiny paint brush I cleaned all of the gunk out. No more leak even with the old gasket in place. I'll save the new gasket for when I need it in the future. Read more

$51.30

Compare At:: $61.56
You Save:: $10.26

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Dishwasher Door Gasket

4.9 (81)

By: Whirlpool

Part Number: WP902894

The Whirlpool Dishwasher Door Gasket is an OEM part for Whirlpool dishwashers. It provides a watertight seal around the door to prevent water leaks during the wash cycle. With a length of 66.5 inches, this part forms an airtight seal around the dishwasher door, preventing water leaks during operation.

Causes of a bad door gasket can include cracks and breaks developing from repeated exposure to temperature changes during wash cycles. Over time, rubber perishes leaving gaps that compromise the seal.

Symptoms of a failing door gasket:

Water pools on the floor in front of the dishwasher
Dishes remaining wet after a full cycle
Visible cracks or tears in the rubber

This genuine OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Water leakage bottom right of dishwasher door David D. • Venice , FL • November 20, 2014

After discovering your web site and reading of others issues I ordered a door seal (my old one was a little short on the right side) a detergent door grommet, and the 2 water deflectors ( I decided to cover all the bases while I was at it. Very simple job with the information provided on your web site. I certainly have the confidence to tackle other appliance repair now. Read more

$53.27

Compare At:: $63.92
You Save:: $10.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Float Switch Base Gasket

5.0 (9)

By: Whirlpool

Part Number: WP8531743

The Float Switch Base Gasket is an OEM part for Whirlpool dishwashers. This gasket is specifically designed to seal the area around the float switch base, preventing water leaks that can occur during the dishwasher's operation.

Causes of damage to the Float Switch Base Gasket often involve normal wear and tear, as the rubber or plastic material can degrade over time due to exposure to detergents, hot water, and the mechanical action of the float switch.

Symptoms of a bad Float Switch Base Gasket include:

Water leaking from the bottom of the dishwasher
Signs of water damage or corrosion around the float switch area
The dishwasher may malfunction or display error codes related to water filling issues if water leaks interfere with the float switch operation.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You The dishwasher was leaking from the water level float David C. • Whippany , NJ • January 20, 2019

Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more

$38.70

Compare At:: $46.44
You Save:: $7.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Air Vent Gasket

4.8 (18)

By: Whirlpool

Part Number: WP8269259

The Air Vent Gasket is an OEM part for Whirlpool dishwashers. It is designed to seal the air vent, preventing water from leaking out during the dishwasher's operation. This gasket plays a critical role in maintaining the efficiency and effectiveness of your dishwasher by ensuring a watertight seal around the air vent, which is essential for the proper function of the venting system.

Causes of a bad Air Vent Gasket can include wear and tear over time, leading to cracks or deterioration, improper installation, which may result in a poor seal, or damage from harsh cleaning chemicals.

Symptoms of a bad Air Vent Gasket include:

Water leaking from around the dishwasher's door.
Dishes not drying properly due to compromised venting.
Visible signs of wear or damage on the gasket itself.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Kitchenaid dishwasher leaking on bottom left of door Neil D. • Centerbrook , CT • January 14, 2017

First tried replacing the seal around the door as that was the simple and most logical fix. Still leaked. Removed the front and upper panel to inspect. Found calcium deposit running down from under the Air Vent Assembly and wet behind the black stick-on insulation. Easy to trace the leak to the bottom of the door. => Ordered new Air Vent Assembly, gasket and Vent Deflector. Parts arrived. Took 5 minutes to remove upper panel. Removed the two wires from the Air Vent Assembly. Inserted a... Read more

$41.95

Compare At:: $49.92
You Save:: $7.97

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Foam Insulation Strip

4.8 (8)

By: Whirlpool

Part Number: WPW10117748

The Foam Insulation Strip is an OEM replacement part for Whirlpool built-in dishwashers. Located sealing the door perimeter, this compressible foam strip cushions closing motions while blocking entry of outside air and moisture during cycles.

Causes result from compression damage during repeated door shuts detaching the adhesive backing. Exposure to penetrating steam can also degrade polyurethane material integrity.

Symptoms of failure involve:

Gaps allowing air and heat loss to compromise drying
Drafts carrying soil and residue back into cleaned dishes
Accelerated tub corrosion from an uninsulated interior environment

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Water leaking/dripping from door of bottom of dishwasher door Dan R. • Norwalk , OH • September 22, 2014

About a month ago, a sporadic drip was noticed on right hand bottom corner of dishwasher. Puddle would vary in size but nothing major. My first inclination was to change the door gasket (~$35 at a major online retailer) as this seemed reasonable to me and was a straightforward fix. Next wash cycle, no drip. However the drip returned the wash cycle after that, however this time at a different spot along the bottom of dishwasher door. I then replaced a deteriorated corner door seal (~$17... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Front Bearing And Seal Kit

4.8 (14)

By: Whirlpool

Part Number: 279264

The Front Bearing and Seal Kit is an OEM replacement part for Whirlpool dryers. This kit includes the front bearing and seal for the dryer drum, which work together to provide smooth operation and prevent premature wear.

Causes of a bad front bearing and seal can include regular wear and tear from normal use, heavy loads that place extra strain on the bearings, or debris accumulation causing increased friction.

Symptoms of issues include:

Noisy or grinding sounds coming from the drum area
Vibration noticed during the operation
Difficulty turning or rotating the dryer drum by hand
Reduced efficiency and longer drying times

This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016

After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify... Read more

$59.95

Compare At:: $71.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Tub Inlet Gasket

4.8 (4)

By: Whirlpool

Part Number: WP8531323

The Tub Inlet Gasket is an OEM part for Whirlpool dishwashers. It ensures a watertight seal at the point where water enters the tub, preventing leaks and maintaining efficient water flow during the wash cycle.

Causes of a bad tub inlet gasket include wear and tear from regular use, damage from harsh cleaning chemicals, or drying out and cracking due to age.

Symptoms of a bad tub inlet gasket include:

Water leaking from the front or bottom of the dishwasher
Poor cleaning results due to insufficient water pressure
Visible cracks or wear on the gasket
Unusual noises from the dishwasher during the filling cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Jenn airJDB8000AWS3 dishwasher would not drain Lynden B. • Benicia , CA • December 17, 2019

Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more

$25.95

Compare At:: $30.62
You Save:: $4.67

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Deflector

4.8 (6)

By: Whirlpool

Part Number: WP8528862

The Deflector is an OEM replacement part for Whirlpool dishwashers. Located in the lower corners of the tub, this component works to prevent leaks by keeping water from entering the cracks along the tub edges.

Causes of a bad corner deflector can include cracks, chips, or breaks from repeated impact or stress over time. Mineral buildup can also cause deflectors to warp or become misshapen, reducing their effectiveness.

Symptoms of a bad corner deflector include:

Water leaks or moisture inside the cabinet below the dishwasher
Puddles or drips near tub corners after cycles
Mineral residue or pooling in lower tub corners

Replacing the corner deflector with a new OEM part restores a tight seal to prevent water from entering cracks and causing leaks or damaged components inside the cabinet.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking at bottom of my dishwasher ( whirlpool model ) Stephen V. • Port St Lucie , FL • November 15, 2015

I went to YouTube and put in my issue and saw the video on how to replace the seals and deflectors in my dishwasher. I then spoke to a local repair guy and he said that I was on the right track on replacing those parts first. The price he gave me were pretty high on the parts. I was able to go to Whirlpool website and obtain the part codes that I need to replace and found this website to be the cheapest. Appliance parts pro. Com. It was easy to order and real easy to replace. So I replace... Read more

$47.95

Compare At:: $57.06
You Save:: $9.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Mounting Bracket Gasket

4.9 (7)

By: Whirlpool

Part Number: WP9743002

Gasket for upper wheel.

Do-It-Yourself Stories from Customers like You 2 broken "wheel and mount assemblies" (same side) and a few misc upper basket plastic part were broken Michael B. • Wellington , FL • December 29, 2015

With the basket out of the dishwasher, the plastic parts basically snap on and off... popped the broken parts off and the new parts on. The 2 wheel and mount assemblies were a little more complicated. The video on the website advises to disconnect the supply line and drain line... I didn't have to do this. I just pulled the dishwasher out of its cabinet a little over a foot and removed the 2 screws holding each assembly in place and removed them. The previous gaskets (2 PER ASSEMBLY)... Read more

$9.95

Compare At:: $11.84
You Save:: $1.89

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Amana Water Deflector (Dishwasher)

5.0 (6)

By: Whirlpool

Part Number: WP99001885

This dishwasher water deflector redirects spray back into the tub at the front edge, helping prevent splash-over and leaks during cycles. Replace a cracked, warped, or missing deflector to keep floors dry and wash performance consistent.

Directs wash water away from the door opening and front corners
Helps reduce leaks and puddles at the bottom front of the dishwasher
Restores proper containment when the original deflector is deformed, loose, or missing
Common symptoms include water on the floor at the front, drips during cycles, or visible damage to the deflector

What's included: 1 water deflector Installation notes:

Disconnect power and turn off the water supply before servicing
Open the door to access the front/tub area; remove the old deflector
Clean the mating area and seat the new deflector fully and evenly
Run a short test cycle and check for leaks

Do-It-Yourself Stories from Customers like You Water leakage bottom right of dishwasher door David D. • Venice , FL • November 20, 2014

$10.95

Compare At:: $12.92
You Save:: $1.97

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Amana Door Seal (Dishwasher)

4.8 (6)

By: Whirlpool

Part Number: WP99003337

This dishwasher door seal fits into the tub channel to create a tight, water-resistant barrier when the door closes. Replacing a worn gasket helps stop nuisance leaks and restores proper door compression and moisture containment.

Creates the primary seal around the dishwasher tub opening when the door is closed
Helps keep wash water, suds, and steam inside the wash cavity
Wear can lead to drips at the front corners or along the sides
Replace if the gasket is cracked, torn, flattened, or no longer sealing; the door may be harder to latch

What's included: 1 door seal Installation notes:

Disconnect power and turn off the water supply before servicing
Remove the old gasket and thoroughly clean the channel of debris and residue
Warm and relax the new gasket; start at the top center and press evenly into the channel without stretching
Close the door for several hours to help the seal set; run a test cycle and check for leaks

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Part that shoots water to top spinning arm was coming apart and seals around door looked bad Ralph L. • Miami , FL • June 20, 2016

I ordered a new rubber door seal for around door, new bottom door seal and spinner impeller and nut to hold on bottom arm as it looked weak. Everything worked great except bottom door seal which looks slightly different and would NOT stay on. I ended up putting back on the old one. Door doesnt leak but not sure it would even be worth it sending part back as I already tossed bag out. Other parts worked great and DW cleaning better. Read more

$109.70

Compare At:: $131.64
You Save:: $21.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Amana Coupler Gasket

5.0 (2)

By: Whirlpool

Part Number: WP910218

This coupler gasket creates a tight, leak-resistant seal at a coupler connection point, helping maintain proper operation of the assembly. Replace when the original gasket is worn, cracked, or flattened to prevent drips and seepage.

Forms the seal between a coupler and its mating component
Helps prevent water seepage and air intrusion at the joint
Supports correct flow/pressure through the connection
Common symptoms: drips at the fitting, moisture around the coupler, or needing to over-tighten to stop leaks

What's included: 1 coupler gasket Install notes:

Disconnect power and shut off water supply before servicing
Relieve line pressure and place a towel to catch residual water
Clean mating surfaces; seat the gasket squarely in the coupler recess
Tighten fittings evenly; restore service and check for leaks

Do-It-Yourself Stories from Customers like You The coupler was leaking badly Eric T. • St Clair Shores , MI • May 09, 2015

Replaced the coupler gasket. No leaks now. Read more

$6.48

Compare At:: $7.71
You Save:: $1.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Amana dishwasher gasket or seal replacement parts are essential for keeping your appliance in top-working condition. These components prevent leaks by creating a tight seal around the door. High-quality Amana dishwasher parts are key to avoiding water puddles on your kitchen floor, protecting both your home and your convenience.

Your Amana dishwasher is an essential kitchen tool, making daily chores easier. The gasket or seal is crucial for maintaining its efficiency by securely sealing the door during cycles, thus preventing water from escaping. Using OEM replacement parts ensures compatibility and durability, helping your dishwasher perform at its best.

Whenever you notice wear and tear on your dishwasher's gasket or seal, reliable replacement parts are readily available. Quality parts mean you can keep your appliance running smoothly, just like new.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Amana Dishwasher Gasket & Seal

Amana Lower Door Seal

Amana Lower Door Seal

Amana Gasket And Strike Kit

Amana Cabinet Seal

Amana Door Gasket

Amana Dishwasher Door Gasket

Amana Float Switch Base Gasket

Amana Air Vent Gasket

Amana Foam Insulation Strip

Amana Front Bearing And Seal Kit

Amana Tub Inlet Gasket

Amana Deflector

Amana Mounting Bracket Gasket

Amana Water Deflector (Dishwasher)

Amana Door Seal (Dishwasher)

Amana Coupler Gasket

Common Problems