Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Hot Point HTDX100EM3WW: Backsplash, Blower & Motor Assembly Parts

Parts for Hot Point HTDX100EM3WW: Backsplash, Blower & Motor Assembly Parts

Location on Diagram
Part Description
Price & Availability
1
By: Ge
Part Number: WE2M308

This silicon controlled rectifier (SCR) controls power flow to heating and motor circuits, restoring proper electronic regulation in appliances that use SCR-based control boards. Replaces a failed SCR to help return normal heat and motor control. What it does:

  • Acts as a switch to regulate current to heating elements or motors when the control board signals it.
  • Common symptom: unit fails to heat or run when the control board is commanding operation.
  • Common symptom: intermittent or no power to specific circuits controlled by the SCR.
  • Helps prevent erratic operation when the SCR is functioning properly.
What's included: One silicon controlled rectifier (specified 8-15 x 7/16 stud) as shown. Install notes:
  • Disconnect power to the appliance before servicing to avoid shock or injury.
  • Handle the SCR carefully; avoid bending the stud or damaging terminals.
  • Mount and torque stud to specified appliance hardware; ensure good electrical contact and any required heat sink connection.

More
$9.24

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
1
By: Ge
Part Number: WE20X20412
$72.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
1
Product photo
By: Ge
Part Number: WE19M1481

Replacement rear panel for dryers. Restores the cabinet's back surface when the original is dented, rusted, cracked, or damaged. Secures and protects internal wiring and components.

More
$65.66

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
1
Product photo
5.0 (3)
By: Ge
Part Number: WE49X22295

Replaces damaged outer and inner door panels to restore appearance and maintain proper door alignment. Replace if panels are cracked, warped, or dented. Verify fit with your model number.

More
$258.50

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
3
Product photo
By: Ge
Part Number: WE49X22294
$59.48

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
4
Product photo
By: Ge
Part Number: WE49X22294
$59.48

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
7
Best Seller
Product photo
4.9 (288)
By: Ge
Part Number: WE1M652

White plastic timer knob for dryer control panel. Replaces cracked, broken, or stripped knobs that prevent you from selecting drying cycles.

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
13
Product photo
By: Ge
Part Number: WE19M1670

This backsplash assembly with printed graphic restores the painted backguard area and control-labeling on your range. It provides a finished appearance and replaces a cracked, faded, or missing backsplash graphic for clearer labels and cleaner looks. What it does

  • Replaces the painted backguard/basplash panel and its printed control graphics
  • Restores legible control labels and a uniform finished appearance
  • Helps prevent dirt and grease from reaching internal components behind the backguard
  • Addresses symptoms like cracked or chipped backing, worn or faded graphics, and loose or missing backguard panels
What's included One backsplash assembly with graphic, white. Install notes
  • Disconnect power to the appliance before beginning work to avoid shock or injury
  • Removal typically requires lifting or removing the cooktop or backguard trim
  • Handle painted surfaces carefully to avoid scratching; use proper fasteners and alignment during reassembly
  • After installation, test controls and inspect the fit and finish before regular use

More
$211.47

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
19
Best Seller
Product photo
4.9 (18)
By: Ge
Part Number: WH01X10313

Replacement control knob for washing machines. Installs on the control panel to select cycle and temperature settings. Needed when cracked or broken.

More
$10.95

IN STOCK
Ships Today Guaranteed
Add to Cart
35
Best Seller
Product photo
4.8 (54)
By: Ge
Part Number: WE4M416

Dryer won't start when you press the button, or stops when released? The push-to-start switch often fails. Easy 20-minute DIY repair with video.

More
$29.95

IN STOCK
Ships Today Guaranteed
Add to Cart
41
Best Seller
Product photo
4.9 (171)
By: Ge
Part Number: WH01X10106

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.  

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

  • The control knob is loose or falls off the panel easily.
  • Difficulty in adjusting settings due to a loose knob.
  • The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

75
Product photo
4.7 (3)
By: Ge
Part Number: WE2M173

Replacement screw for securing dryer components like drum supports, panels, and housings. Needed when screws are lost, stripped, or damaged during repair.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

80
Best Seller
Product photo
5.0 (7)
By: Ge
Part Number: WE4M255

Fix a dryer timer that won't advance or automatic cycles that stopped working. This timer resistor regulates cycle duration. Easy 15-minute repair.

More
$34.95

IN STOCK
Ships Today Guaranteed
Add to Cart
87
Product photo
By: Ge
Part Number: WE4M404

This control component allows selection of different heat settings and is located on the dryer's control panel. Replace it if you can't select certain temperature settings, the dryer runs too hot or cold, or the switch feels loose or unresponsive.

More
$48.46

IN STOCK
Ships Today Guaranteed
Add to Cart
100
Best Seller
Product photo
4.9 (127)
By: Ge
Part Number: WE4M532

Dryer won't start or advance cycles? A faulty timer is often the cause. This part controls cycle duration and power flow. Moderate DIY repair.

More
$88.50

IN STOCK
Ships Today Guaranteed
Add to Cart
201
Best Seller
Product photo
5.0 (1)
By: Ge
Part Number: WE16X20393

Dryer barely blowing air or taking forever to dry? A worn blower wheel fails to pull air through the drum. This wheel restores airflow for efficient drying.

More
$46.95

IN STOCK
Ships Today Guaranteed
Add to Cart
203
Product photo
By: Ge
Part Number: WE13X200

Secures the drive motor to its mounting bracket. Replace if cracked, broken, or missing to keep the motor and blower aligned and stable during operation.

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
204
Product photo
By: Ge
Part Number: WE1X921

Secures your dryer motor to the cabinet to reduce vibration and noise. Replace if motor shifts or rattles during operation. Confirm fit with your model.

More
$41.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
205
By: Ge
Part Number: WE13M39

Metal bracket that secures the dryer motor and blower assembly in place. Replace if your mounting bracket is cracked, broken, or causing loose components.

More
$42.23

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
213
Best Seller
Product photo
4.9 (704)
By: Ge
Part Number: WE03X29897

Transfers power from motor to drum in your dryer. Replace if squeaking, not spinning, or visibly worn. Confirm fit with your model number before ordering.

More
$46.46

IN STOCK
Ships Today Guaranteed
Add to Cart
215
Product photo
5.0 (1)
By: Ge
Part Number: WE03X20434

Supports the idler pulley to maintain proper belt tension in your dryer. Replace if the arm is warped, cracked, or causing belt tracking issues.

More
$85.36

IN STOCK
Ships Today Guaranteed
Add to Cart
216
Best Seller
Product photo
4.8 (143)
By: Ge
Part Number: WE12X83

The Idler Pulley is an OEM part for GE dryers. This critical component helps to maintain the correct tension on the dryer's drive belt, ensuring smooth operation and preventing it from slipping. 

Symptoms of a bad Idler Pulley include:

  • Squeaking or screeching noises during dryer operation, often a sign of bearing wear or failure.
  • The dryer drum not turning smoothly, or at all, indicating that the belt may be slipping or has come off entirely due to a failed pulley.
  • Excessive heat or a burning smell, which can occur if the pulley is seizing up and causing friction.
  • Visible wear or damage to the pulley itself.

Causes of a bad idler pulley can include worn bearings, accumulation of lint and debris that impedes rotation, or material fatigue after prolonged use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

More
$24.95

IN STOCK
Ships Today Guaranteed
Add to Cart
218
Product photo
By: Ge
Part Number: WE14X20392
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

218
Product photo
5.0 (2)
By: Ge
Part Number: WE14X20421

Replaces a cracked, rusted, or disconnected exhaust duct that routes hot air from your dryer to the home vent. Restores proper airflow and venting.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

218
Product photo
5.0 (3)
By: Ge
Part Number: WE09X27636

Seals the blower-to-exhaust duct connection in your dryer. Replace if torn, brittle, or causing heat loss and longer dry times. Confirm fit by model.

More
$8.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
230
Product photo
By: Ge
Part Number: WE4M127

Fix a dryer that won't heat, overheats, or runs too long. This thermostat cycles the heating element to maintain safe drying temperatures.

More
$18.95

IN STOCK
Ships Today Guaranteed
Add to Cart
231
Product photo
By: Ge
Part Number: WD02X10057

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

  • Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
  • Secures brackets, panels, and assemblies to the tub or frame
  • Helps resolve symptoms like loose panels, vibration, or rattling noises
  • Restores proper hold when the original screw is stripped, missing, or damaged
What's included: 1 screw.
  • Disconnect power and shut off water to the dishwasher before servicing
  • Match length and thread to the original; replace screws one at a time to maintain alignment
  • Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
  • Verify no wires or hoses are pinched before reassembly
Specs (for match-up):
  • Size: #10-16 x 1/2 inch
  • Head: hex washer-head
  • Type: AB tapping screw

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
232
Product photo
By: Ge
Part Number: WE2M202

Replacement mounting screw for dryer panels and components. Needed when original screws are stripped, missing, or damaged during repair or maintenance.

More
$12.38

IN STOCK
Ships Today Guaranteed
Add to Cart
233
Product photo
By: Ge
Part Number: WE13X20394

This motor plate is the stamped metal mounting plate that secures the motor assembly and keeps it aligned for smooth operation. It restores proper motor positioning and reduces vibration-caused noise or wear. What it does:

  • Provides a stable mounting surface for the motor assembly
  • Maintains motor alignment to ensure smooth shaft rotation
  • Helps reduce excess vibration and noise from a loose or damaged motor support
  • Supports related components so belts and pulleys track correctly
What's included: One motor plate Install notes:
  • Disconnect power before starting any repair to avoid shock or injury
  • Installation requires basic hand tools and access to the motor compartment
  • Verify motor and surrounding hardware are undamaged; replace any worn fasteners

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

234
4.8 (21)
By: Ge
Part Number: WE2M96
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
235
Product photo
By: Ge
Part Number: WE2M307

10-16 x 1/2 mounting screw secures panels, brackets, and internal components in your dryer. Replace when stripped, missing, or corroded for stable assembly.

More
$12.47

IN STOCK
Ships Today Guaranteed
Add to Cart
237
Product photo
By: Ge
Part Number: WD02X10057

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

  • Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
  • Secures brackets, panels, and assemblies to the tub or frame
  • Helps resolve symptoms like loose panels, vibration, or rattling noises
  • Restores proper hold when the original screw is stripped, missing, or damaged
What's included: 1 screw.
  • Disconnect power and shut off water to the dishwasher before servicing
  • Match length and thread to the original; replace screws one at a time to maintain alignment
  • Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
  • Verify no wires or hoses are pinched before reassembly
Specs (for match-up):
  • Size: #10-16 x 1/2 inch
  • Head: hex washer-head
  • Type: AB tapping screw

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
502
Product photo
5.0 (2)
By: Ge
Part Number: WE2M174

This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.

  • Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
  • Restores proper fit when an original screw is missing, stripped, or damaged
  • Helps eliminate rattling or vibration from loose hardware
  • Keeps components safely in place during operation
What's included: 1 screw Install notes:
  • Disconnect power to the appliance before servicing
  • Match length, head style, and thread to the original; install in the same location/quantity
  • Start threads by hand to avoid cross-threading; tighten with the correct driver
  • Do not overtighten, especially into plastic or thin sheet metal

More
$12.38

IN STOCK
Ships Today Guaranteed
Add to Cart
630
Best Seller
Product photo
4.7 (26)
By: Ge
Part Number: WE17X22217

Dryer won't start, stops mid-cycle, or runs backward? The drive motor powers drum rotation. Moderate difficulty repair requires disassembly. Video guide.

More
$173.95

IN STOCK
Ships Today Guaranteed
Add to Cart
631
5.0 (1)
By: Ge
Part Number: WE1M650
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

2232
Best Seller
Product photo
4.9 (14)
By: Ge
Part Number: WE1M659

Replace your dryer's push to start button if cracked, broken, or worn. This button installs on the control panel. Commonly needs replacement due to wear.

More
$13.31

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google